π§ Product Overview
The ABB 3BSE009858R1 NI0C-01C is an I/O board used in the ABB ACS600 variable frequency drive family. The board is identified by the ABB part number 3BSE009858R1 and type designation NI0C-01C.
As an internal drive control/interface board, the NI0C-01C is intended to work as part of the ACS600 drive architecture rather than as a standalone PLC module. It is particularly useful for maintenance and replacement of legacy ACS600 installations where the original board has failed or requires replacement.
When ordering, the complete type designation, ABB part number, hardware revision, connector arrangement, and existing drive configuration should be checked carefully.
βοΈ Key Features
- π ABB ACS600 drive-family electronic board
- π§© ABB part number: 3BSE009858R1
- π Type designation: NI0C-01C
- π I/O interface board for compatible ACS600 drive systems
- π Suitable for maintenance and replacement applications
- π οΈ Designed for integration with the drive’s internal control architecture
- π Hardware revision and connector configuration should be matched before installation
π Product Datasheet
| Parameter | Specification |
|---|---|
| Brand | ABB |
| Part Number | 3BSE009858R1 |
| Type | NI0C-01C |
| Product Type | ACS600 I/O Board |
| Product Family | ABB ACS600 |
| Application | Variable Frequency Drive / Motor Control |
| Board Function | I/O Interface / Drive Control Interface |
| Host System | Compatible ABB ACS600 Drives |
| Hardware Revision | Verify from actual board |
| Dimensions | Verify from actual unit |
| Weight | Verify from actual unit |
π System Integration
The NI0C-01C is part of the internal electronics of an ABB ACS600 drive. It should therefore be evaluated together with the complete drive assembly rather than as an independent automation controller.
Before replacement, compare:
- ABB part number 3BSE009858R1
- Type designation NI0C-01C
- Revision marking
- PCB layout and component arrangement
- Connector locations and keying
- Existing ACS600 drive model
- Control-board configuration
- Associated boards and internal wiring
The ACS600 architecture can contain several dedicated boards, including control, power, interface, and communication assemblies. A visually similar board with a different type designation should not automatically be treated as a compatible replacement.
π Typical Applications
The board is intended for compatible ABB ACS600 variable frequency drive installations used for motor-speed and process control.
Typical industrial applications may include:
- ποΈ Industrial machinery
- βοΈ Motor-driven production equipment
- π Process automation
- π Pumps and fans
- π¦ Material-handling equipment
- π’ Marine and industrial drive systems
- π§ Legacy ACS600 maintenance projects
π οΈ Installation & Replacement Procedure
- π Stop the drive and isolate the incoming electrical supply.
- β‘ Follow the applicable DC-link discharge procedure before opening the drive.
- πΈ Record the original connector positions and cable routing.
- π Verify 3BSE009858R1 / NI0C-01C against the installed board.
- π§© Check revision markings and connector arrangement.
- π§ Remove the original board using appropriate ESD precautions.
- π Install the replacement board in the corresponding position.
- π Reconnect all wiring according to the original configuration.
- β‘ Inspect for loose connections or incorrectly seated connectors.
- π§ͺ Perform controlled power-up and verify drive operation before returning the equipment to production.
Always observe the safety procedures specified for the particular ACS600 drive, especially because the drive’s DC-link circuitry can remain energized after incoming power has been disconnected.
π Troubleshooting Guide
Drive does not operate after board replacement
Check board seating, connectors, internal wiring, and compatibility with the specific ACS600 drive configuration.
Drive reports an I/O or control-related fault
Inspect the connector interfaces and verify that the replacement board has the correct type and revision.
Intermittent operation
Check connector contacts, PCB contamination, oxidation, mechanical stress, and loose internal connections.
Board appears physically compatible but the drive behaves differently
Recheck the complete part number and hardware revision. Similar ABB boards may perform different functions within the ACS600 architecture.
Drive will not complete startup
Check all associated control and interface boards rather than assuming the NI0C-01C is the only possible cause.
π Maintenance Recommendations
- Keep spare boards in ESD-safe packaging.
- Avoid touching exposed PCB contacts and components.
- Inspect connectors before installation.
- Keep the drive cabinet clean and dry.
- Check cooling and ventilation to reduce thermal stress on electronic assemblies.
- Record installed board revisions during preventive maintenance.
- Keep one correctly matched spare when supporting older ACS600 equipment.
β FAQ
Q: What is ABB 3BSE009858R1 NI0C-01C?
A: It is an ABB NI0C-01C I/O board used within compatible ACS600 variable frequency drive systems.
Q: Is this a complete ACS600 inverter?
A: No. It is an internal electronic board intended to operate as part of a compatible ACS600 drive assembly.
Q: Can NI0C-01C be used in any ACS600 drive?
A: Compatibility depends on the specific ACS600 drive model and hardware configuration. The complete part number and original board designation should be matched.
Q: What should I verify before purchasing?
A: Verify 3BSE009858R1, NI0C-01C, the board revision, connector arrangement, and the model of the ACS600 drive in which the board will be installed.
Q: Does the board require special handling?
A: Yes. Use appropriate ESD protection and follow the drive manufacturer’s power-isolation and DC-link discharge procedures.
π¦ Spare Parts Recommendation
For legacy ACS600 installations, keeping a correctly identified NI0C-01C spare can shorten troubleshooting and repair time. When preparing a replacement, record the existing board’s complete identification markings and compare them with the spare before installation.
π§ Related ABB ACS600 Models & Boards
- ABB ACS600 NAMC-11 Control Board
- ABB ACS600 NAMC-11C Control Board
- ABB ACS600 NDCU-03 Drive Control Unit
- ABB ACS600 NPOW-42 Power Board
- ABB ACS600 NINP-61 Input Power Board
- ABB ACS600 NINT-41 Interface Board
- ABB ACS600 NINT-42 Communication Board
- ABB ACS600 NINT-61 Interface Board
- ABB ACS600 NIOC-02C I/O Board
- ABB ACS600 NDCU Series Drive Control Boards


