🔹 Product Overview
The BASLER AVC125-10-A1 is an analog automatic voltage regulator designed for generator excitation and voltage-control applications. It provides closed-loop regulation of generator output voltage and is intended for brushless-excited synchronous generators and retrofit applications.
The AVC125-10 series uses a PWM power stage and supports shunt-fed, PMG, or auxiliary-winding power sources. It also provides volts-per-hertz limiting, overexcitation shutdown, external voltage adjustment, and provisions for generator paralleling and reactive load sharing.
The AVC125-10-A1 version is particularly suitable for generator, marine, industrial power-generation, and excitation-system maintenance where an existing analog AVR needs to be replaced.
⚙️ Key Features
- Basler Electric AVC125-10-A1 analog voltage regulator
- Automatic generator voltage regulation
- PWM excitation power stage
- Continuous output up to 125 VDC at 10 ADC
- ±0.5% voltage regulation accuracy
- Supports shunt, PMG, or auxiliary-winding power input
- Volts-per-hertz limiting
- Overexcitation shutdown
- External voltage adjustment capability
- Integrated paralleling provisions
- Suitable for generator retrofit and maintenance applications
⚡ Excitation & Generator Integration
The AVC125-10-A1 regulates generator terminal voltage by controlling the excitation field. Generator voltage feedback is monitored by the regulator, while the PWM output stage supplies controlled excitation current to the field circuit.
The regulator can be integrated with generator systems using shunt excitation power or PMG/auxiliary-winding sources. Paralleling provisions allow the regulator to participate in reactive load sharing when correctly configured with the generator control system.
For marine generator applications, the AVR can form part of a larger generator automation system together with the engine governor, generator protection relay, synchronization equipment, and load-sharing controller.
📋 Technical Datasheet
| Parameter | Specification |
|---|---|
| Brand | BASLER ELECTRIC |
| Model | AVC125-10-A1 |
| Product Series | AVC Series |
| Product Name | Analog Automatic Voltage Regulator |
| Product Type | Generator Excitation Controller |
| Power Input | 180–264 VAC, 50–400 Hz |
| Sensing Input | 90–139 VAC, 50/60 Hz |
| Accessory Input | ±3 VDC |
| Maximum Continuous Output | 125 VDC @ 10 ADC |
| Regulation Accuracy | ±0.5% of voltage setpoint |
🛠️ Installation & Commissioning
- Isolate the Generator – Ensure the generator and excitation circuit are fully de-energized before installing or replacing the AVR.
- Verify Model – Confirm AVC125-10-A1 and the required sensing/power-input configuration against the original regulator.
- Check Field Circuit – Verify field resistance, excitation wiring, terminals, and insulation before connecting the regulator.
- Verify Voltage Sensing – Confirm sensing voltage and phase configuration before energization.
- Check Power Source – Confirm that the excitation power source is compatible with the selected AVC125-10 configuration.
- Check Adjustment Settings – Verify voltage, stability, V/Hz, and paralleling settings before starting the generator.
- Controlled Startup – Start the generator under controlled conditions and monitor terminal voltage, excitation output, and AVR response.
- Load Test – After stable no-load operation is confirmed, gradually apply load and verify voltage regulation and reactive load-sharing behavior.
🔍 Troubleshooting
Generator voltage does not build up:
Check AVR power input, sensing connections, field circuit continuity, residual voltage requirements, and excitation wiring.
Generator voltage is unstable:
Inspect voltage-sensing wiring and verify the regulator’s stability and adjustment settings.
Excitation output is excessive:
Check sensing polarity, field wiring, V/Hz configuration, and the excitation system for abnormal loading.
Generator voltage drops during load application:
Check excitation capacity, voltage-sensing connections, V/Hz settings, and generator load conditions.
Parallel generators do not share reactive load correctly:
Inspect CT connections and paralleling circuitry and verify that the AVC configuration is appropriate for the generator installation.
🧰 Maintenance Recommendations
Keep the AVC125-10-A1 clean, dry, and protected from conductive contamination.
During scheduled generator maintenance, inspect terminal connections, excitation wiring, sensing circuits, and adjustment potentiometers for looseness or deterioration.
Because the regulator directly controls generator excitation, any replacement should be followed by a controlled voltage-build-up test and functional verification before the generator is returned to normal service.
For critical marine and industrial generators, maintaining a tested spare AVR can significantly reduce restoration time following an excitation-system failure.
🔄 Replacement Considerations
The AVC125-10-A1 should be replaced only after confirming the required AVC configuration and generator excitation characteristics.
Before replacement, verify:
- AVC125-10-A1 model
- Power-input voltage range
- Generator sensing voltage
- Sensing phase configuration
- Excitation field voltage/current requirements
- Field resistance
- PMG, shunt, or auxiliary power source
- Paralleling/CT configuration
- Existing V/Hz and stability settings
The AVC125-10-A1 should not be selected solely because its output rating matches the generator. The complete excitation and sensing configuration must also be compatible.
❓ FAQ
What is the BASLER AVC125-10-A1?
It is an analog automatic voltage regulator used to control generator excitation and maintain generator output voltage.
What is its maximum continuous excitation output?
The AVC125-10 provides up to 125 VDC at 10 ADC continuous output.
What type of generators can use the AVC125-10?
It is intended for synchronous generator excitation applications, including brushless-excited generator systems.
Does it support PMG excitation systems?
Yes. The AVC125-10 power stage is designed to work with shunt-fed, PMG, or auxiliary-winding power sources when correctly configured.
Does the regulator support generator paralleling?
Yes. The AVC series provides provisions for paralleling and reactive load sharing.
What should be checked before installing a replacement?
Verify sensing voltage, power input, field requirements, generator configuration, CT/paralleling connections, and AVR adjustment settings.
📦 Recommended Related BASLER Models
- BASLER AVC63-12 Analog Voltage Regulator
- BASLER AVC125-10 Analog Voltage Regulator
- BASLER DECS-150 Digital Excitation Control System
- BASLER DECS-200 Digital Excitation Control System
- BASLER DECS-400 Digital Excitation Control System
- BASLER BE1-FLEX Generator Protection & Control
- BASLER BE1-11 Generator Protection System
- BASLER BE1-25A Synchronizer
- BASLER BE1-32R Reverse Power Relay
- BASLER BE1-27 Undervoltage Relay
✅ Product Summary
The BASLER AVC125-10-A1 is a high-power analog automatic voltage regulator for generator excitation and voltage-control applications. With 125 VDC / 10 ADC continuous excitation output, PWM control, V/Hz limiting, overexcitation shutdown, external voltage adjustment, and paralleling provisions, it is suitable for marine generators, industrial generator sets, retrofit projects, and legacy excitation-system maintenance.
For replacement applications, matching the AVR configuration with the generator sensing, excitation power source, field requirements, and paralleling arrangement is essential.


