⚙️ Product Overview
The WARTSILA GREEN INSTRUMENTS H3600A IG is a Single Inert Gas Analyzer Panel identified by part number 01488. It is associated with marine inert gas systems and is used for monitoring the oxygen content of inert gas generated for shipboard applications.
The H3600A analyzer panel forms part of the instrumentation and monitoring arrangement around an inert gas system. Oxygen measurement is particularly important because the inert gas must remain within the specified operating limits before being delivered to the protected vessel system.
This unit is suitable for marine maintenance, replacement, ship repair, retrofit, and spare-parts applications where the existing installation specifically identifies the H3600A IG / 01488 configuration.
🔧 Key Features
- Wärtsilä Green Instruments marine analyzer equipment
- Model: H3600A IG SINGLE
- Part Number: 01488
- Single inert gas analyzer panel
- Designed for marine inert gas monitoring
- Oxygen-content measurement within compatible I.G. systems
- Supports shipboard safety and process monitoring
- Suitable for tanker and cargo-vessel inert gas applications
- Intended for integration with the existing analyzer/sample system
- Exact electrical configuration and analyzer accessories should be verified before replacement
📋 Product Datasheet
| Parameter | Specification |
|---|---|
| Brand | WARTSILA |
| Product Division | Green Instruments |
| Model | H3600A IG / H3600A IG SINGLE |
| Part Number | 01488 |
| Product Name | Single Inert Gas Analyzer Panel |
| Product Type | Marine Inert Gas Analyzer Panel |
| Main Measurement | Oxygen content in inert gas |
| Application | Marine inert gas system |
| System Function | Gas analysis and safety monitoring |
| Analyzer Configuration | Single analyzer |
| Electrical Supply | Verify against installed configuration |
| Sample System | Compatible inert-gas sample system |
| Country of Origin | Denmark |
| Condition | Used |
| Dimensions | Verify from actual panel |
| Weight | Verify from actual panel |
🧪 Oxygen Analysis Function
The H3600A analyzer panel is associated with oxygen analysis in marine inert gas installations.
A typical monitoring path can be represented as:
Inert Gas Generator → Sample Gas Conditioning → H3600A Analyzer → O₂ Measurement → Alarm/Control System
The analyzer receives a representative gas sample and provides the oxygen measurement required by the vessel’s inert gas monitoring arrangement.
Correct sample conditioning is important. The sample path should be checked for contamination, blockage, moisture, leaks, and stable flow before diagnosing an analyzer fault.
🚢 Marine Inert Gas Applications
The H3600A IG panel can be used in compatible systems for:
- Oil and chemical tanker inert gas systems
- Cargo tank protection
- Marine inert gas generation systems
- Oxygen-content monitoring
- Shipboard safety instrumentation
- Inert gas plant monitoring
- Marine automation and alarm systems
- Vessel maintenance and retrofit projects
- Shipyard overhaul and replacement work
🔌 System Integration
When replacing an H3600A IG panel, the complete analyzer installation should be checked rather than relying only on the external panel appearance.
Important items include:
- H3600A IG model identification
- Part number 01488
- Analyzer configuration
- Sample gas inlet and outlet connections
- Sample conditioning components
- Electrical supply and signal wiring
- Alarm and monitoring interfaces
- Calibration arrangement
- Existing vessel automation interface
- Applicable oxygen alarm and shutdown settings
The analyzer should be integrated according to the original vessel documentation and the configuration of the installed inert gas system.
🛠️ Installation & Commissioning
Before Installation
- Isolate the analyzer’s electrical supply.
- Confirm that the sample gas system is safe to work on.
- Verify the H3600A IG / 01488 identification.
- Record existing wiring and terminal connections.
- Check sample tubing for contamination or blockage.
- Inspect connectors and terminals for corrosion.
- Compare the replacement unit with the existing panel before installation.
After Installation
- Confirm correct electrical connections.
- Check sample gas flow.
- Inspect the sample conditioning system.
- Allow the analyzer to reach its normal operating condition.
- Perform the applicable calibration procedure.
- Compare the analyzer reading with an approved reference.
- Verify oxygen alarms and monitoring signals.
- Confirm correct communication with the vessel automation system where applicable.
🔍 Troubleshooting Guide
Oxygen reading is unstable
Check sample flow, moisture, leaks, contamination, calibration condition, and analyzer operating stability.
Analyzer shows an unexpectedly high O₂ value
Inspect the sample line for air ingress, leaks, poor sample conditioning, incorrect calibration, or insufficient inert gas quality.
Analyzer reading is lower than expected
Check sample flow, analyzer calibration, sample contamination, and the actual operating condition of the inert gas generator.
No analyzer indication
Check electrical supply, fuse/protection devices, internal connections, display or controller condition, and associated signal wiring.
Calibration cannot be completed
Verify that the calibration gas/reference condition is correct and that the sample system is clean and stable before replacing the analyzer.
Alarm remains active after replacement
Check alarm limits, signal wiring, calibration, PLC/automation inputs, and the cause of the original alarm rather than assuming the analyzer itself is defective.
🧰 Maintenance Checklist
- Inspect the analyzer panel periodically.
- Keep the sample system clean and dry.
- Check sample tubing for leaks or restrictions.
- Inspect filters and sample-conditioning components.
- Verify oxygen analyzer calibration at the required interval.
- Check electrical terminals for looseness or corrosion.
- Monitor abnormal drift in oxygen readings.
- Keep calibration and maintenance records.
- Maintain a tested spare when inert gas system availability is critical.
⚠️ Safety Considerations
Inert gas systems can create oxygen-deficient atmospheres. Work on the analyzer and sample system should therefore be performed only under the vessel’s approved safety procedures.
Do not bypass oxygen alarms, interlocks, or protective functions simply to restore an analyzer indication. Any calibration or functional test should follow the applicable marine system procedure.
❓ FAQ
Q1. What is the WARTSILA H3600A IG?
It is a single inert gas analyzer panel used in compatible marine inert gas monitoring systems.
Q2. What does the analyzer monitor?
The H3600A is associated with monitoring the oxygen content of inert gas.
Q3. What is the part number?
The referenced unit is identified by 01488.
Q4. Is H3600A IG a complete inert gas generator?
No. It is an analyzer/monitoring panel within the inert gas system.
Q5. Where is this equipment typically used?
It is intended for compatible shipboard inert gas systems, particularly marine cargo and tanker applications.
Q6. Can any H3600A panel replace an H3600A IG 01488?
Replacement should be based on the complete model, part number, analyzer configuration, wiring, sample system, and vessel installation.
Q7. Does the analyzer require calibration?
Yes. Oxygen measurement equipment should be calibrated according to the applicable analyzer and vessel maintenance procedure.
Q8. What should be checked before purchasing a replacement?
Confirm WARTSILA Green Instruments, H3600A IG SINGLE, and 01488, together with the physical panel, connectors, sample connections, and existing system configuration.
🔄 Recommended Related Marine Analyzer & Inert Gas Components
- Wärtsilä Green Instruments H3600A IG Analyzer
- Wärtsilä Moss IGS Oxygen Analyzer Panel
- Wärtsilä Inert Gas Oxygen Analyzer Assembly
- Wärtsilä Inert Gas Sample Conditioning Unit
- Wärtsilä I.G. Sample Gas Filter Assembly
- Wärtsilä Inert Gas Control Panel
- Wärtsilä I.G. Generator Control System
- Wärtsilä Inert Gas Scrubber Instrumentation
- Wärtsilä Inert Gas Dryer Control Equipment
- Wärtsilä Marine Gas Monitoring Components
📦 Spare Parts Recommendation
For vessels where inert gas availability is operationally important, keeping a tested spare analyzer panel can reduce troubleshooting and replacement time.
For purchasing and replacement verification, use the complete identification:
WARTSILA GREEN INSTRUMENTS H3600A IG SINGLE — 01488
Always match the analyzer configuration, sample system, electrical connections, calibration requirements, and vessel-specific automation interface before installation.


