📌 Product Overview
The CONSILIUM SALWICO C316 is a marine Fire Alarm Control Panel designed for compatible Salwico fire detection and alarm systems. It serves as a central control and monitoring component for fire detection equipment installed on vessels and other demanding marine environments.
The C316 belongs to the established Salwico fire detection product family and is specifically referenced in Consilium documentation and service archives. The model is therefore particularly relevant when maintaining or replacing equipment in an existing C316 installation rather than when designing a completely new fire alarm system.
Current marketplace listings identify the unit as Consilium / Salwico C316, with product type Fire Alarm Control Panel. One listing identifies MPN C316, while another identifies C316 / 03531, so the complete nameplate information should be checked before ordering.
⚙️ Key Features
- Brand: Consilium
- System Brand: Salwico
- Model: C316
- Product Type: Fire Alarm Control Panel
- Primary Application: Marine Fire Detection
- System Function: Central fire alarm monitoring and control
- Typical Environment: Marine / Shipboard
- Replacement Use: Maintenance, repair and retrofit
- Identification: C316 model and complete part number
- Service Consideration: Match the existing Salwico system configuration before replacement
The Salwico architecture is designed around centralized fire detection and alarm control, with connected detection devices and system outputs managed according to the installed configuration. Consilium documentation for related Salwico systems describes continuous supervision of connected detection units and activation of appropriate outputs when a fire condition is detected.
🏭 Typical Applications
🚢 Marine Fire Detection
The C316 is intended for compatible shipboard fire detection installations where centralized monitoring and alarm handling are required.
🔥 Fire Alarm Monitoring
A fire alarm control panel provides the operator interface for monitoring fire conditions, system faults and other alarm-related states.
🛳️ Vessel Safety Systems
The C316 can be used as part of a vessel’s integrated fire detection and safety arrangement, subject to the original system design and approval configuration.
🔧 Legacy System Replacement
The C316 is especially relevant for maintenance teams supporting older Salwico installations. An exact model and hardware match can be more practical than attempting to replace an established panel with an unrelated modern platform.
⚓ Marine Retrofit Projects
For vessels undergoing maintenance or partial automation refurbishment, the C316 can serve as a replacement component where the existing Salwico architecture is retained.
📊 Product Datasheet
| Parameter | Specification |
|---|---|
| Brand | CONSILIUM |
| System Brand | SALWICO |
| Model | C316 |
| Product Type | Fire Alarm Control Panel |
| Product Name | Salwico C316 Fire Alarm Control Panel |
| Application | Marine Fire Detection & Alarm |
| Typical Industry | Marine / Maritime |
| Controller Platform | Fire Alarm Control Panel |
| MPN | C316; some listings also identify 03531 |
| Country of Origin | Sweden* |
| Condition | Used / Surplus |
| Dimensions | Verify from actual unit |
| Weight | Verify from actual unit |
| Power Supply | Verify against original system documentation |
| Communication / I/O | System-specific; verify before replacement |
- Current marketplace listings identify Sweden as the country of origin.
The exact electrical configuration should be confirmed from the installed C316 documentation and the nameplate of the replacement unit. The available product listings do not provide sufficiently reliable manufacturer-level dimensional and electrical data to justify presenting those values as universal specifications.
🔧 Installation & Maintenance
1. Verify the Existing Panel
Before replacement, record:
- C316 model designation
- Complete part number
- Hardware revision
- Serial number
- Existing panel configuration
- Connected detection loops
- Output configuration
- Power supply arrangement
- Cabinet location
This is particularly important because C316 units may appear identical externally while differing in revision or system configuration.
2. Isolate the Fire Alarm System
Before removing the existing panel, follow the vessel’s approved fire alarm maintenance procedure and isolate the relevant power sources.
Fire detection equipment is safety-critical and should not be disconnected from an operating vessel system without appropriate authorization.
3. Inspect Connections
Check:
- Power terminals
- Detection-loop wiring
- Alarm outputs
- Communication wiring
- Grounding
- Terminal blocks
- Connector condition
- Cable insulation
Photograph or document the original wiring arrangement before disconnecting the existing panel.
4. Install the Replacement
Mount the C316 in the approved cabinet position and reproduce the original wiring configuration according to the applicable system documentation.
Do not assume that a connector with the same physical appearance has identical electrical assignments.
5. Commissioning
After installation, conduct a complete functional check:
- Power-up inspection
- Panel status verification
- Indicator/LED test
- Fire alarm simulation
- Fault indication test
- Alarm acknowledgement
- Alarm reset
- Connected detector/loop verification
- Output verification
- System log/event verification
Related Salwico documentation describes functions such as fire alarm indication, system fault indication, status monitoring and alarm reset as part of the fire detection control architecture.
🛠️ Troubleshooting Guide
Panel does not power up
Check the approved power source, protection devices, terminals and internal connections. Confirm that the replacement panel matches the original electrical configuration.
System fault appears after replacement
Check wiring, communication paths, detection loops and configuration compatibility. Compare the hardware revision of the replacement with the removed C316.
Fire alarm input is not detected
Inspect the corresponding detection loop, field wiring and connected detector devices. Confirm that the loop configuration corresponds to the original system.
Alarm cannot be reset
Check whether the initiating fire condition or fault remains active. A reset should not be treated as a substitute for correcting the underlying condition.
Intermittent fault
Inspect terminals and connectors for corrosion, looseness or vibration-related damage, especially in marine installations.
Replacement panel behaves differently from the original
Verify the complete part number, hardware revision and system configuration. Do not assume that every C316 unit is configured identically.
❓ Frequently Asked Questions
Q1: What is the Consilium Salwico C316?
It is a Fire Alarm Control Panel used in compatible Salwico marine fire detection systems.
Q2: What is the model number?
The model is C316.
Q3: Is C316 a marine product?
Yes. Available C316 product listings and Salwico documentation identify it within the marine fire detection equipment environment.
Q4: Is this a detector or control panel?
It is a Fire Alarm Control Panel, not an individual fire detector.
Q5: Is C316 still useful for maintenance?
Yes. It can be particularly valuable as a replacement or spare for vessels operating compatible legacy Salwico systems.
Q6: What should I check before purchasing?
Confirm C316, complete MPN/part number, hardware revision, connector arrangement and compatibility with the existing Salwico system.
Q7: Are C316 units available as used equipment?
Yes. Current listings identify C316 units as used equipment.
Q8: Can I replace a C316 with another Salwico panel?
Do not assume direct interchangeability. The replacement must be compatible with the existing detection system, wiring and configuration.
Q9: Is C316 suitable for retrofit projects?
It can be suitable where the existing vessel installation is designed around the Salwico C316 architecture.
Q10: Does the replacement require system testing?
Yes. After replacement, the complete fire detection system should be function-tested by qualified personnel according to the applicable maintenance and commissioning procedure.
🔄 Recommended CONSILIUM SALWICO Models & Related Equipment
- CONSILIUM SALWICO C300 Fire Alarm System
- CONSILIUM SALWICO C303 Fire Alarm Panel
- CONSILIUM SALWICO C308 Fire Alarm Panel
- CONSILIUM SALWICO C316 Fire Alarm Control Panel
- CONSILIUM SALWICO CS3000 Fire Alarm System
- CONSILIUM SALWICO CS4000 Fire Detection System
- CONSILIUM SALWICO Cargo Fire Detection System
- CONSILIUM SALWICO MN3000 Mini Repeater
- CONSILIUM SALWICO MCP-C Manual Call Point
- CONSILIUM SALWICO Addressable Detection Modules
The C300/C303/C308/C316 family and related Salwico systems appear in Consilium documentation and equipment references, making them useful reference points when planning legacy-system spare coverage.
📦 Spare-Part Planning
For a vessel operating a legacy Salwico C316 installation, maintain a detailed spare-parts record containing:
- Manufacturer
- Model
- Complete part number
- Hardware revision
- Serial number
- Cabinet position
- Detection-loop configuration
- Power configuration
- Connected system modules
- Last functional test
- Storage condition
Because the C316 is part of a fire safety system, spare inventory should prioritize exact system compatibility rather than simply matching the external model number.
For critical vessels, maintaining a tested replacement C316 or the appropriate internal spare assemblies can reduce downtime during scheduled maintenance or unexpected panel failure.
Before placing a replacement into service, compare the original and replacement units side by side and verify all identification markings, wiring points and system configuration.
Important: Fire alarm equipment is safety-critical. Installation, replacement, wiring and commissioning should be performed by qualified personnel in accordance with the vessel’s approved safety procedures and applicable Consilium/Salwico documentation.


