🔹 Product Introduction
The WAGO 750-341 is an Ethernet TCP/IP Fieldbus Coupler designed for the WAGO-I/O-SYSTEM 750. It connects WAGO I/O modules to an Ethernet-based control network and automatically detects connected I/O modules to create a local process image.
The coupler supports both digital and analog I/O data and is suitable for distributed automation, machine control, process monitoring, and industrial Ethernet applications.
🔹 Communication & Integration
The WAGO 750-341 supports 10/100 Mbit/s Ethernet communication and provides an RJ-45 fieldbus connection. Supported communication protocols include MODBUS/TCP, EtherNet/IP, HTTP, BootP, DHCP, DNS, SNTP, FTP, and SNMP.
The unit can support up to 64 WAGO I/O modules, with a maximum of 2040 digital signals and 1020 analog signals according to the published technical data.
The device uses 24 VDC supply and provides electrically isolated fieldbus communication. Its CAGE CLAMP connection system is designed for integration with WAGO I/O assemblies in industrial control cabinets.
🔗 Product Keyword: WAGO 750-341 Ethernet Fieldbus Coupler
🔹 Product Datasheet
| Parameter | Value |
|---|---|
| Brand | WAGO |
| Model | 750-341 |
| Series | WAGO-I/O-SYSTEM 750 |
| Product Name | Ethernet TCP/IP Fieldbus Coupler |
| Place of Manufacture | Germany |
| Product Status | Discontinued / Legacy Model |
| Dimensions | 65 × 51 × 100 mm |
| Weight | Approx. 179.5 g |
| Original Country | Germany |
| Power Supply | 24 VDC |
| Ethernet Speed | 10/100 Mbit/s |
| Ethernet Connection | RJ-45 |
| Supported Protocols | MODBUS/TCP, EtherNet/IP, HTTP, BootP, DHCP, DNS, SNTP, FTP, SNMP |
| Maximum I/O Modules | 64 |
| Protection Rating | IP20 |
The published WAGO data lists the unit at 65 mm high, 51 mm wide, 100 mm deep, with a weight of approximately 179.5 g. The supply specification is 24 VDC, and the Ethernet interface supports 10/100 Mbit/s communication.
🔹 Typical Applications
• Distributed PLC I/O systems
• Industrial Ethernet control panels
• Machine automation
• Factory automation
• Digital and analog signal acquisition
• Remote I/O applications
• Process monitoring and control
• WAGO-I/O-SYSTEM 750 installations
🔹 Common Questions & Answers
Q1: What is the WAGO 750-341 used for?
A1: It is an Ethernet TCP/IP fieldbus coupler used to connect WAGO-I/O-SYSTEM 750 I/O modules to an Ethernet control network.
Q2: Does the 750-341 support analog and digital I/O?
A2: Yes. The coupler can create a process image containing both analog and digital I/O data.
Q3: What Ethernet speed does the 750-341 support?
A3: It supports 10 Mbit/s and 100 Mbit/s Ethernet communication.
Q4: What connector is used for Ethernet?
A4: The fieldbus interface uses an RJ-45 connector.
Q5: What power supply does it require?
A5: The published specification lists a 24 VDC supply with a permitted range of approximately -15% to +20%.
Q6: How many I/O modules can be connected?
A6: The published technical data specifies a maximum of 64 I/O modules.
Q7: Is the WAGO 750-341 still a current model?
A7: WAGO catalog information identifies the 750-341 as a discontinued product, with discontinuation dated February 28, 2013. WAGO lists the 750-352 as an alternative part.
Q8: Can it communicate with a PLC?
A8: Yes. The coupler is designed as an Ethernet fieldbus device and supports protocols including MODBUS/TCP and EtherNet/IP for communication with higher-level control systems.
Q9: Is the 750-341 suitable for replacement applications?
A9: It can be considered for replacement or maintenance of existing WAGO-I/O-SYSTEM 750 installations, but the communication protocol, I/O configuration, firmware compatibility, and system requirements should be checked before installation.
Q10: What should be checked before installation?
A10: Verify the model number, Ethernet protocol, 24 VDC supply, connected I/O modules, wiring, network configuration, and application requirements before commissioning.
🔹 Recommended WAGO Models
- WAGO 750-342 — Ethernet Fieldbus Coupler
- WAGO 750-352 — Ethernet TCP/IP Fieldbus Coupler
- WAGO 750-343 — Ethernet Fieldbus Coupler
- WAGO 750-340 — Ethernet Fieldbus Coupler
- WAGO 750-841 — Ethernet Controller
- WAGO 750-842 — Ethernet Controller
- WAGO 750-8202 — Ethernet Controller
- WAGO 750-530 — Digital Output Module
- WAGO 750-430 — Digital Input Module
- WAGO 750-455 — Analog Input Module


