🔹 Product Introduction
The ABB RED670 1MRK004810-DC is a line differential protection relay from the ABB Relion 670 series, designed for high-speed protection and control of electrical transmission and sub-transmission lines.
The RED670 uses line differential protection to compare current information from the terminals of a protected line and identify faults within the protected zone. ABB identifies RED670 as the line differential protection member of the Relion 670 family.
The relay is suitable for applications requiring selective line protection, protection-system communication, fault detection, monitoring, and integration with substation automation systems.
🔹 Protection & Application
The RED670 platform provides dedicated line differential protection functions together with additional protection and supervision functions. Depending on the exact hardware configuration, product version, and ordering code, available functions can include phase and residual overcurrent protection, breaker failure protection, voltage protection, frequency protection, and communication-based protection schemes.
The Relion 670 platform supports modern substation communication technologies. ABB documentation for the 670 series describes Ethernet communication, IEC 61850 functionality, HSR redundancy, and precision time synchronization features for applicable product versions.
🔹 Model & Product Keywords
ABB RED670 1MRK004810-DC Line Differential Protection Relay
Related search keywords: ABB RED670, 1MRK004810-DC, RED670 relay, Relion 670, line differential relay, 87L protection relay, ABB protection relay, transmission line protection.
🔗 ABB RED670 1MRK004810-DC Line Differential Protection Relay
🔹 Product Datasheet
| Parameter | Value |
|---|---|
| Brand | ABB |
| Model | RED670 |
| Ordering / Product Code | 1MRK004810-DC |
| Series | Relion 670 Series |
| Product Name | Line Differential Protection Relay |
| Protection Function | Line Differential Protection |
| Product Status | Used / Surplus / Subject to actual item condition |
| Application | Transmission and Sub-transmission Line Protection |
| Rated Auxiliary Supply | Configuration dependent |
| Rated Current Input | 1 A or 5 A, configuration dependent |
⚠️ Configuration Note: RED670 is a configurable protection IED, and exact auxiliary voltage, communication interfaces, I/O quantity, CT/VT configuration, software version, and optional functions depend on the complete ordering configuration. The 670-series technical documentation lists 1 A or 5 A rated current inputs and multiple hardware configurations.
🔹 Typical Applications
• Transmission line differential protection
• Sub-transmission line protection
• Overhead line protection
• Cable line protection
• Substation protection and control
• Digital substation applications
• Protection-system communication
• Backup overcurrent and earth-fault protection
• Power-system monitoring and supervision
🔹 Common Questions & Answers
Q1: What is the ABB RED670 used for?
A1: The RED670 is primarily used for line differential protection and control in electrical power networks.
Q2: What does 87L mean in the RED670 application?
A2: ANSI 87L refers to line differential protection. The protection compares current information associated with the protected line to identify faults within the protected zone.
Q3: Is RED670 part of the Relion 670 series?
A3: Yes. ABB identifies RED670 as the line differential protection product within the Relion 670 family.
Q4: Can RED670 be used for overhead lines and cables?
A4: The RED670 platform is intended for line protection applications, with configurations and functions selected according to the specific protection scheme and system requirements.
Q5: Does RED670 support IEC 61850?
A5: Applicable Relion 670 versions support IEC 61850-based substation communication. ABB documentation also describes IEC 61850-9-2LE process-bus support for applicable 670-series versions.
Q6: Does every RED670 have the same hardware configuration?
A6: No. RED670 is available in different hardware and functional configurations. Auxiliary supply, I/O, communication interfaces, current and voltage inputs, and optional functions should be verified against the complete ordering code.
Q7: What should be checked before replacing an existing RED670?
A7: Check the complete product code, hardware configuration, firmware/software version, auxiliary voltage, CT/VT inputs, communication interfaces, I/O configuration, protection settings, and system drawings.
Q8: Can RED670 communicate with another protection terminal?
A8: Yes. Line differential protection requires communication between the relevant line terminals. The specific communication method depends on the installed communication hardware and protection-system configuration.
Q9: What software is associated with the Relion 670 series?
A9: ABB identifies PCM600 and the corresponding IED connectivity package as engineering and configuration tools for applicable Relion 670 versions.
Q10: Is 1MRK004810-DC enough to determine the complete relay configuration?
A10: The code is an important identification reference, but for replacement purposes it is recommended to verify the complete nameplate, hardware configuration, firmware, communication modules, and application settings before installation.
🔹 Recommended ABB Models
- ABB RED615 — Line Differential Protection and Control Relay
- ABB REL670 — Line Distance Protection Relay
- ABB REL650 — Line Protection Relay
- ABB REC670 — Bay Control Unit
- ABB REB670 — Busbar Differential Protection Relay
- ABB REG670 — Generator Protection Relay
- ABB RET670 — Transformer Protection Relay
- ABB RES670 — Synchrophasor / PMU IED
- ABB RED650 — Line Differential Protection Relay
- ABB REF615 — Feeder Protection and Control Relay
The ABB Relion portfolio includes dedicated products for line differential, line distance, busbar, generator, transformer, and bay-control applications.


