Product Description
The Yokogawa AAI143-H50 S1 is a 16-channel isolated analog input module designed for Yokogawa CENTUM-series process control systems. It receives standard 4–20 mA DC signals from field transmitters and converts them into process data for the control system. The AAI143 family provides electrical isolation between the input side and system side and supports dual-redundant configurations.
The -H version adds HART digital communication capability, allowing compatible smart field instruments to exchange additional digital information alongside the 4–20 mA process signal. This makes the module suitable for process measurements such as pressure, temperature, flow, and level.
Key Features
🔹 16 isolated analog input channels
🔹 4–20 mA DC current input
🔹 HART digital communication on the -H version
🔹 1500 V AC input-to-system isolation withstand rating
🔹 Supports 2-wire and 4-wire transmitter configurations
🔹 10 ms data update period
🔹 Integrated transmitter power supply
🔹 Suitable for dual-redundant system configurations
🔹 Designed for Yokogawa FIO-based control systems
Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | Yokogawa |
| Model | AAI143-H50 S1 |
| Product Series | AAI143 |
| Product Name | 16-Channel Isolated Analog Input Module |
| Input Channels | 16 |
| Input Signal | 4–20 mA DC |
| Isolation | Isolated input channels / system side |
| Allowable Input Current | 24 mA max. |
| Isolation Withstand Voltage | 1500 V AC for 1 minute |
| Data Update Period | 10 ms |
| HART Communication | Supported on -H version |
| Transmitter Configuration | 2-wire / 4-wire |
| Power | System/backplane supplied; consumption depends on configuration |
The published Yokogawa specifications identify AAI143 as a 16-channel isolated 4–20 mA module, with 24 mA maximum allowable input current, 1500 V AC isolation withstand voltage, and a 10 ms data-update period.
Typical Applications
The AAI143-H50 S1 can be used for:
- Process pressure measurement
- Temperature transmitter inputs
- Flow measurement
- Level measurement
- Smart transmitter monitoring
- Yokogawa DCS analog input expansion
- Existing CENTUM system maintenance and replacement
- Process automation and plant instrumentation
System Integration & Replacement Notes
Before replacing an existing AAI143 module, verify the complete suffix and option code rather than relying only on the base model number. Yokogawa documentation lists several AAI143 variants, including standard, HART, environmental-temperature and explosion-protection configurations.
For a replacement installation, confirm:
- Exact model and suffix: AAI143-H50 S1
- Number and type of connected transmitters
- 2-wire or 4-wire transmitter configuration
- HART communication requirements
- Terminal block and cable/interface arrangement
- FIO/field control unit or ESB node compatibility
- Existing control-system configuration and module parameters
- Redundancy requirements, if applicable
The module should be matched to the existing Yokogawa I/O architecture and field wiring before installation.
FAQ
Q1: How many input channels does the AAI143-H50 S1 provide?
It provides 16 isolated analog input channels.
Q2: What input signal does it accept?
The AAI143 is designed for 4–20 mA DC current signals.
Q3: Does the AAI143-H50 support HART?
Yes. The -H suffix identifies the HART communication version of the AAI143 family.
Q4: Can it be used with 2-wire transmitters?
Yes. The AAI143 supports configuration for 2-wire or 4-wire transmitters on individual channels.
Q5: Is each input isolated?
The AAI143 is specified as a 16-channel isolated analog input module, with isolation between the input side and system side.
Q6: Is AAI143-H50 suitable as a direct replacement for another AAI143?
Compatibility depends on the exact suffix, options, terminal arrangement, system configuration and application. Verify the complete Yokogawa part number before replacement.
Related Yokogawa Models
- AAI143-S50
- AAI143-H53
- AAI143-HE0
- AAI143-SE0
- AAI141-H
- AAI543-H
- AAI135-H
- AAI835-H
- AAV144
- AAR145


