The ABB AFS670 is a 19-inch rack-mounted managed Ethernet switch designed for industrial and utility communication networks. It is part of ABB’s AFS family of managed switches and is suited to substation automation, SCADA, control-system networking, and other applications where reliable Ethernet communication is required.
The AFS670 uses a modular configuration concept, allowing different copper, optical, SFP and Gigabit Ethernet interfaces to be combined according to the selected ordering code. ABB documentation lists support for up to 24 ports on the AFS670, with RSTP and SNTP functions and station-bus networking capabilities.
The supplied configuration is AFS670-EREEDDDSSEEEEEEEPZYX05.1.00. Because AFS670 configurations can vary by port module, power supply and interface arrangement, the physical port layout and auxiliary power rating should be checked against the unit’s nameplate before installation.
For industrial automation, substation communication and replacement requirements, you can also view related products through Industrial Automation Products.
📋 Product Datasheet
| Parameter | Specification |
|---|---|
| Brand | ABB |
| Model | AFS670 |
| Ordering Code | AFS670-EREEDDDSSEEEEEEEPZYX05.1.00 |
| Series | AFS670 |
| Product Name | 19″ Ruggedized Managed Ethernet Switch |
| Product Type | Managed Industrial Ethernet Switch |
| Network Layer | Layer 2 |
| Maximum Port Capacity | Up to 24 ports |
| Ethernet Interfaces | Configuration-dependent; copper, optical, SFP and Gigabit options |
| Network Functions | RSTP, SNTP, VLAN and managed Ethernet functions depending on configuration |
| Mounting | 19-inch rack mounting |
| Housing | Metal industrial housing |
| Dimensions | Approx. 448 × 44 × 310 mm |
| Weight | Approx. 4 kg; configuration-dependent |
| Power Supply | Configuration-dependent; low-voltage DC or high-voltage AC/DC options |
| Operating Temperature | Configuration-dependent; harsh-environment versions available |
| Country of Origin | Configuration-dependent |
| Condition | Used – Good Condition |
🔧 Key Features
- 19-inch rack-mounted industrial Ethernet switch
- Modular port architecture for flexible network configurations
- Up to 24 Ethernet ports according to ABB documentation
- Copper and fiber communication options
- Gigabit Ethernet options available depending on configuration
- Managed Layer 2 switching
- RSTP support for network redundancy
- SNTP support for network time synchronization
- Suitable for station-bus communication
- Metal housing for industrial cabinet installation
- Designed for utility and substation communication environments
- Front or rear port arrangement depending on configuration
- Redundant power supply options available on applicable versions
⚡ Typical Applications
Substation Automation
The AFS670 can be used as a managed Ethernet switch within substation communication networks, connecting protection IEDs, bay controllers, automation equipment and supervisory systems.
SCADA Networks
It can provide managed Ethernet connectivity between SCADA servers, RTUs, controllers, engineering stations and field communication equipment.
Industrial Control Systems
The switch is suitable for industrial Ethernet architectures where multiple PLC, HMI, controller and monitoring devices need to communicate over a managed network.
Utility Communication
The AFS670 family is designed for utility environments and is referenced by ABB for station-bus applications.
🔗 System Integration
The AFS670 can be integrated into existing Ethernet infrastructures using the interface modules specified by its ordering code. RSTP can be used for network topology redundancy, while SNTP provides network time synchronization.
When replacing an existing AFS670, verify the complete ordering code rather than matching only the basic model number. Port quantity, media type, Gigabit interfaces, power supply and physical port arrangement may differ between configurations.
🛠️ Installation & Maintenance Notes
- Confirm the complete ordering code and nameplate information before installation.
- Verify the installed power-supply version against the available cabinet supply.
- Confirm copper, SFP and optical interface requirements before connecting network cables.
- Install the switch securely in the appropriate 19-inch rack position.
- Connect protective grounding according to the applicable electrical installation requirements.
- Check link LEDs and management status after powering the unit.
- Back up the existing configuration before making major network changes.
- Use compatible optical transceivers and fiber types for the installed interface modules.
❓ FAQ
Q1: What is the ABB AFS670?
A: The AFS670 is a 19-inch managed industrial Ethernet switch from ABB’s AFS family.
Q2: How many ports can the AFS670 support?
A: ABB documentation lists the AFS670 with up to 24 ports. The actual number and type depend on the selected hardware configuration.
Q3: Is the AFS670 a managed switch?
A: Yes. It is a managed Layer 2 Ethernet switch intended for controlled industrial and utility networks.
Q4: Does it support RSTP?
A: Yes. ABB lists RSTP support for the AFS670 family.
Q5: Can the AFS670 use fiber connections?
A: Yes. Depending on the configuration, the AFS670 can use optical interfaces and SFP-based connections.
Q6: Is this switch suitable for substation applications?
A: Yes. ABB documents the AFS670 as a 19-inch managed Ethernet switch for utility environments and station-bus applications.
Q7: Does every AFS670 have the same power supply?
A: No. Power supply options vary by configuration. The installed unit should be checked against its complete ordering code and nameplate.
Q8: Can I replace another AFS670 directly?
A: A direct replacement should be confirmed using the complete ordering code, because AFS670 units can have different port and power configurations.
Q9: Is AFS670 suitable for PLC and SCADA networks?
A: Yes. Its managed Ethernet architecture can be used for PLC, SCADA, controller and supervisory communication networks.
Q10: What should I verify before purchasing?
A: Verify the complete ordering code, number and type of Ethernet ports, optical interface type, power supply, port location and physical condition.
🔄 Recommended ABB Models
- ABB AFS675 – 19″ Managed Ethernet Switch
- ABB AFS677 – 19″ Managed Ethernet Switch
- ABB AFS660B – DIN-Rail Managed Ethernet Switch
- ABB AFS665B – DIN-Rail Managed Ethernet Switch
- ABB AFS660C – Managed Ethernet Switch
- ABB AFS660S – Managed Ethernet Switch
- ABB AFS665S – Managed Ethernet Switch
- ABB AFS650 – Industrial Managed Ethernet Switch
- ABB AFS655 – Industrial Managed Ethernet Switch
- ABB AFF650 – Industrial Ethernet Security Switch
ABB’s engineering documentation identifies these AFS/AFF models as part of its utility-oriented managed Ethernet switch portfolio, with different mounting formats, port capacities and redundancy capabilities.


