The ABB SYNCHROTACT 5 3BHB006717R0221 is a digital synchronizing device for generator synchronization, power-line paralleling, and synchrocheck applications. It is part of ABB’s SYNCHROTACT 5 family, designed to control and supervise the safe closing of power circuit breakers when voltage, frequency, and phase conditions are within the configured limits.
SYNCHROTACT 5 can be applied in power plants, substations, industrial generation systems, and other installations where generators or AC networks need to be connected in parallel. ABB specifies support for up to seven power circuit breakers with different synchronization requirements.
The platform supports automatic synchronization as well as synchrocheck functions for manual or automatic paralleling. Depending on the selected device configuration and options, communication can include IEC 61850, Modbus, Profibus, or LON.
📋 Product Datasheet
| Parameter | Details |
|---|---|
| Brand | ABB |
| Model | SYNCHROTACT 5 |
| Part Number | 3BHB006717R0221 |
| Product Series | SYNCHROTACT 5 |
| Product Name | Synchronizing and Paralleling Device |
| Product Type | Digital Synchronizing Relay |
| Main Application | Generator & Power-Line Synchronization |
| Synchronization Capacity | Up to 7 circuit breakers* |
| Communication | IEC 61850 / Modbus / Profibus / LON* |
| Frequency Systems | 50 Hz / 60 Hz / 16.7 Hz* |
| Condition | Used – Working Good |
| Country of Origin | Switzerland* |
| Power Supply | Configuration-dependent* |
| Dimensions | Configuration-dependent* |
| Weight | Configuration-dependent* |
*Capabilities depend on the exact SYNCHROTACT 5 device type, options, and ordering configuration. ABB documentation identifies multiple device types and option combinations within the SYNCHROTACT 5 family.
⚙️ Key Features
- Automatic generator-to-grid synchronization
- Synchronization of synchronous AC lines
- Synchrocheck function for manual paralleling
- Dead-bus and dead-line operation
- Synchronization of up to seven circuit breakers with different requirements
- Support for 50 Hz, 60 Hz, and 16.7 Hz systems
- Dual-channel concept on applicable configurations
- Configurable parameter sets for different paralleling points
- IEC 61850 communication on applicable configurations
- Modbus, Profibus, and LON communication options
- SynView PC software for commissioning and maintenance
🔌 System Integration
SYNCHROTACT 5 monitors the electrical conditions on both sides of a circuit breaker and determines whether the configured synchronization conditions are satisfied before issuing or releasing a paralleling command.
Typical signals include:
- Generator voltage
- Network or busbar voltage
- Frequency
- Frequency difference
- Voltage difference
- Phase-angle difference
- Circuit-breaker status
- Voltage and frequency adjustment commands
- Paralleling command
The device can interface with generator excitation/AVR and speed-governor systems through appropriate control outputs. ABB also documents configurable digital inputs and relay outputs for parameter-set selection, paralleling-point selection, test mode, blocking, and status signaling.
🏭 Typical Applications
Power Generation
Used for automatic synchronization of generators with the electrical grid.
Substations
Can be applied for paralleling synchronous lines and busbars.
Industrial Power Systems
Suitable for facilities with captive generation requiring controlled generator-to-grid connection.
Marine and Process Applications
SYNCHROTACT equipment is also part of ABB’s synchronization portfolio for industrial and marine power systems.
🛠️ Installation & Replacement Notes
Before replacing an existing SYNCHROTACT 5 unit, compare the complete part number 3BHB006717R0221, device type, option configuration, terminal arrangement, auxiliary supply, and parameter settings.
For commissioning, verify:
- Auxiliary power and grounding.
- Voltage-transformer connections.
- Generator and grid voltage inputs.
- Frequency measurement.
- Circuit-breaker feedback.
- AVR and governor control outputs.
- Paralleling command circuit.
- Synchronization limits and time settings.
- Communication configuration if installed.
- Final synchrocheck and breaker-closing operation.
ABB provides SynView software for parameter setting, commissioning, actual-value monitoring, transient recording, and event/error review.
❓ FAQ
Q: What is ABB SYNCHROTACT 5 used for?
A: It is used for automatic synchronization and controlled paralleling of generators, power lines, and busbars.
Q: Can SYNCHROTACT 5 perform synchrocheck?
A: Yes. It can monitor synchronization conditions for manual or automatic paralleling applications.
Q: How many circuit breakers can one SYNCHROTACT 5 synchronize?
A: ABB states that the SYNCHROTACT 5 can synchronize up to seven power circuit breakers with different requirements.
Q: Does this part support IEC 61850?
A: SYNCHROTACT 5 supports IEC 61850 on applicable configurations through its communication architecture. The exact interface should be confirmed from the unit’s configuration and nameplate.
Q: Is 3BHB006717R0221 a complete SYNCHROTACT 5 device?
A: The supplied listing identifies 3BHB006717R0221 as an ABB SYNCHROTACT 5 unit. For replacement purposes, the physical label and complete configuration should be checked against the existing system.
🔹 Recommended ABB Models
- ABB SYNCHROTACT 5 — Synchronizing Device
- ABB SYNCHROTACT 6 — Synchronizing and Paralleling Device
- ABB UNITROL 1000 — Automatic Voltage Regulator
- ABB UNITROL 6000 — Excitation System
- ABB UNITROL 5000 — Excitation System
- ABB REG670 — Generator Protection and Control IED
- ABB REG615 — Generator Protection and Control Relay
- ABB RET670 — Transformer Protection and Control IED
- ABB REC670 — Bay Control and Protection IED
- ABB REU615 — Voltage Protection and Control Relay


