π Product Overview
The ABB PU515A 3BSE032401R1 is a Real-Time Accelerator (RTA) board designed for industrial communication and distributed control system applications. It is associated with ABB Advant OCS, Advant Master, and MOD 300 systems using the MasterBus 300 (MB300) communication protocol. <Cite refs={[“turn314314search12″,”turn314314search11”]}/>
The board provides a dedicated processing resource for communication tasks and includes a dual-channel MB300 communication interface. It is designed for installation in a compatible industrial computer’s PCI or PCI-X slot, rather than a conventional AC 800M controller rack. <Cite refs={[“turn314314search12″,”turn314314search1”]}/>
This product is suitable for legacy DCS maintenance, control-system workstation servicing, and replacement-part procurement. Verify the host computer, operating environment, interface requirements, and exact part number before ordering.
βοΈ Product Datasheet
| Parameter | Specification |
|---|---|
| Brand | ABB |
| Model | PU515A |
| Part Number | 3BSE032401R1 |
| Product Series | Advant OCS / Advant Master |
| Product Name | Real-Time Accelerator (RTA) Board |
| Product Type | PCI communication accelerator board |
| Communication Protocol | MB300 (MasterBus 300) |
| Processor | 25 MHz |
| Memory | 16 MB RAM |
| Communication Channels | 2 |
| Communication Speed | Up to 10,000 kbit/s |
| Bus Interface | 32-bit, 33 MHz PCI; compatible PCI-X slots subject to system requirements |
| Connectors | 2 Γ 15-pin female D-sub |
| Power Requirements | Supplied through a compatible PCI slot |
| Dimensions | Confirm board dimensions and chassis clearance before installation |
| Net Weight | Approximately 0.4 kg |
| Country of Origin | Sweden, according to product documentation |
| Product Condition | Depends on supplier inventory |
| Discontinued Status | Listed as obsolete by specialist suppliers; confirm current ABB support status |
π οΈ Parameter Settings and Modification
The PU515A is a communication accelerator board, not a general-purpose PLC module. Its configuration depends on the host computer, installed ABB control software, and MB300 network setup.
- Record the complete part number and hardware revision.
- Verify that the host computer supports the required PCI or PCI-X interface.
- Confirm the installed ABB software version and compatibility with the PU515A.
- Check the MB300 channel assignments, network connections, and any redundant communication arrangements.
- Back up relevant workstation and DCS configuration files before replacing the board.
- After installation, verify communication status and data exchange with the connected control system.
β οΈ Do not change network addresses, software drivers, or communication settings without checking the applicable ABB documentation. Incorrect settings may interrupt communication with the DCS.
π Manual and Automatic Mode Switching
The PU515A handles communication tasks and does not independently control machine manual or automatic operating modes.
Manual mode: Operators use the approved workstation or control interface to issue authorized commands. Confirm that the control station is communicating correctly with the DCS.
Automatic mode: The configured control system executes its programmed logic and exchanges process data through the supported communication architecture.
Before switching operating modes, verify controller status, communication health, command-source selection, and process interlocks. Follow the host system’s operating procedures.
π Emergency Shutdown Procedure
The PU515A is not an emergency-stop device and should not be used as a substitute for a safety-rated shutdown system.
- Activate the designated emergency shutdown system when a hazardous condition occurs.
- Follow the plant’s approved shutdown procedure.
- Shut down the host computer using the prescribed procedure before removing the PCI board.
- Isolate electrical power before opening the chassis or handling internal components.
- Have qualified personnel verify DCS communication and control-system health before returning the workstation to service.
Do not remove the board while the host computer is operating unless the manufacturer explicitly documents support for that procedure.
π° Product News and Technical Updates
Specialist industrial suppliers list the PU515A as an obsolete product, making lifecycle verification and replacement planning particularly important. <Cite refs={[“turn314314search11″,”turn314314search12”]}/>
For procurement and maintenance planning, confirm:
- Current availability and official lifecycle status.
- Compatibility with Advant Master and MOD 300 installations.
- Host computer PCI or PCI-X compatibility.
- Availability of supported drivers and engineering software.
- Approved replacement options for legacy MB300 communication systems.
No independently verified recent product announcement specific to the PU515A has been established.
π Product Keywords
ABB PU515A, 3BSE032401R1, ABB Real-Time Accelerator, RTA PCI board, MB300 communication module, MasterBus 300 interface, Advant OCS spare parts, Advant Master communication board, MOD 300 DCS, ABB industrial communication card.
For product identification and replacement-part enquiries, visit ABB PU515A Real-Time Accelerator boards and industrial automation spare parts.
β Frequently Asked Questions
Q1: What is the ABB PU515A 3BSE032401R1?
It is a Real-Time Accelerator board that provides dual-channel MB300 communication for compatible ABB legacy control-system installations.
Q2: Which systems use the PU515A?
It is associated with ABB Advant Master and MOD 300 systems. Confirm the precise workstation and software compatibility for the installed configuration.
Q3: Is the PU515A an AC 800M controller module?
No. It is designed for a compatible PCI or PCI-X host computer, not a standard AC 800M controller rack.
Q4: What communication protocol does it use?
The documented protocol is MB300, also known as MasterBus 300, with two communication channels.
Q5: How much memory does the board have?
Published product documentation specifies 16 MB of onboard RAM and a 25 MHz processor.
Q6: Is the PU515A discontinued?
Specialist suppliers list it as obsolete. Confirm current support and replacement recommendations with ABB or a qualified supplier.
Q7: What should I check before ordering a replacement?
Verify the full part number, board revision, PCI compatibility, host operating system, required drivers, and MB300 network configuration.
π Recommended ABB Models
The following are examples of related ABB control-system, communication, and automation products. They are not all direct substitutes for the PU515A.
- ABB PU515 β Earlier RTA board model; verify hardware and software compatibility.
- ABB PU518 β Related RTA-family model; confirm the exact system requirements.
- ABB PU519 β Related legacy communication accelerator model; verify the applicable configuration.
- ABB CI854A β PROFIBUS-DP communication interface.
- ABB CI840 β Communication interface for compatible I/O systems.
- ABB PM866 β AC 800M programmable controller.
- ABB PM861A β AC 800M controller for industrial automation.
- ABB AI835 β Analog input module.
- ABB AO845 β Analog output module.
- ABB DI840 β Digital input module.
- ABB DO840 β Digital output module.
- ABB PP846A β Operator panel for supported automation systems.
- ABB 216AB61 HESG324013R100 β Binary output unit for compatible RE.216 protection systems.
- ABB DYSF118B 61430001-XG β Communication interface associated with legacy Bailey control systems.
- ABB 3BHE004059R0001 β SDCS-CON-2A control board.
Always verify the complete part number, communication protocol, host-system compatibility, and product condition before purchasing.

