πΉ Product Introduction
The ABB XXD129A01 (3BHE012436R0001) PEC800-BP is a backplane module associated with ABB’s PEC800 power electronics control platform. It provides the physical and electrical interconnection for compatible controller and interface cards within the system.
The backplane supports communication and signal routing between installed modules. It is intended for use as part of a compatible ABB control assembly rather than as a standalone PLC processor or general-purpose I/O module.
Before ordering a replacement, confirm the complete part number, board revision, chassis configuration, and compatibility with the installed PEC800 system.
βοΈ Product Datasheet
| Parameter | Details |
|---|---|
| Brand | ABB |
| Model | XXD129A01 |
| Part Number | 3BHE012436R0001 |
| Module Designation | PEC800-BP |
| Series | ABB PEC800 Power Electronics Control |
| Product Name | Backplane Interface Module |
| Product Type | Controller backplane / interconnection module |
| Application | Compatible ABB PEC800 control assemblies; verify the host system |
| Place of Manufacture | Not independently verified |
| Country of Origin | Supplier listings vary; confirm from the product label |
| Product Status | Confirm actual condition with the seller |
| Dimensions | Supplier specifications vary; verify the actual unit and technical drawing |
| Weight | Approximately 0.54β1.15 kg reported by different suppliers; verify actual unit |
| Power Requirements | Confirm from the applicable PEC800 system documentation |
| Mounting | Compatible rack or chassis assembly; verify the specific configuration |
| Discontinued Status | Current lifecycle status not verified |
π§ Parameter Settings and Configuration
The PEC800-BP is a hardware interconnection module. It is not normally configured like a standalone programmable controller.
- Verify the exact part number and revision before installation.
- Confirm the compatible PEC800 chassis and card arrangement.
- Inspect the backplane connectors for bent contacts, contamination, or physical damage.
- Verify power distribution and card seating using the approved system documentation.
- After replacement, check controller diagnostics and confirm that installed cards are recognized correctly.
Do not apply generic Ethernet, RS-485, Modbus, or PROFIBUS settings unless the documentation for the installed system explicitly identifies those interfaces for this component.
π Manual and Automatic Mode Switching
The PEC800-BP is a backplane module, not an operator panel. Manual and automatic operating modes, where supported, are controlled by the associated controller and application configuration.
Before changing modes, verify the control source, operating permissives, interlocks, and site procedures. Do not remove cards or alter backplane connections while the system is energized unless the manufacturer explicitly permits the procedure.
π Emergency Shutdown and Safety Precautions
- Follow the approved shutdown procedure for the complete power electronics or excitation-control system.
- Isolate applicable power sources and apply lockout/tagout procedures before servicing.
- Verify that hazardous voltage and stored energy have been safely discharged.
- Use electrostatic-discharge protection when handling electronic modules.
- Do not insert or remove controller cards while energized unless explicitly permitted by the applicable documentation.
- Have qualified personnel perform installation, inspection, and commissioning.
π§° Fault Troubleshooting and Common Questions
Q1: What is the ABB XXD129A01 PEC800-BP?
It is a backplane module identified by ABB part number 3BHE012436R0001 and designation PEC800-BP. It provides interconnection for compatible PEC800 control modules.
Q2: Is it a standalone CPU or PLC processor?
It is identified as a backplane module, not a standalone CPU. Its function is to support the interconnection of compatible modules within the control assembly.
Q3: Which ABB systems use this module?
Supplier information associates it with the PEC800 platform. Confirm the exact controller assembly and approved parts list before purchasing.
Q4: Can it be replaced by another PEC800 backplane?
Not automatically. Verify the complete part number, hardware revision, connector layout, and chassis compatibility.
Q5: What should I check if installed cards are not recognized?
Check the seating of the cards, backplane connectors, approved power supplies, and controller diagnostics. Follow the equipment-specific service procedure before replacing components.
Q6: Is the item new or used?
The supplied listing title does not establish the actual condition. Confirm whether the unit is new, surplus, open-box, or refurbished with the seller.
Q7: Is this model discontinued?
Its current lifecycle status has not been verified. Ask ABB or an authorized service provider to check availability using the complete part number.
π° Product and Technical Updates
The XXD129A01 is listed by industrial suppliers as a PEC800-BP backplane module. No specific recent firmware update or product-change notice for this component has been verified. For maintenance planning, confirm the current approved spare part and system compatibility using the documentation for the installed PEC800 assembly.
π Related Product Information
For industrial automation and power electronics spare-parts inquiries, visit DCS PLC System.
π¦ Recommended ABB Models and Product Families
The following ABB components and product families may be relevant when sourcing power electronics and control-system spares. They are not confirmed direct replacements for the XXD129A01; verify compatibility before ordering.
- ABB XXD129A01 β 3BHE012436R0001 β PEC800-BP backplane module.
- ABB PEC800 β Power electronics control platform associated with this module.
- ABB AC 800PEC β Power electronics controller family; confirm the specific hardware architecture.
- ABB 3BHE014967R0001 UNS2880B-P β ABB control board; verify its exact function and application.
- ABB 3BHE017574R001 UNS0889A-P β ABB industrial control board; not a confirmed substitute.
- ABB 3BHE039293R0101 GVC736CE101 β ABB control-related board; confirm system compatibility.
- ABB 3BHE021889R0101 UNS2881A-V1 β ABB control board; verify the approved application.
- ABB UFC760BE142 β 3BHE004573R0142 β Inverter unit interface board for compatible ABB drive equipment.
- ABB UFC719AE101 β 3BHB003041R0101 β IOEC I/O interface module for specified drive systems.
- ABB GFD212A β 3BHE020356R0101 β Gate driver interface board; a different function.
- ABB UFC911B106 β ABB drive-related electronic board; not a confirmed replacement.
- ABB ACS2000 β Medium-voltage drive family; verify the installed control architecture.
- ABB ACS5000 β Medium-voltage industrial drive family.
- ABB ACS6000 β Medium-voltage drive platform; confirm the applicable spare-parts list.
- ABB UNITROL 6000 β Generator excitation-control product family.
Always verify the complete material number, board revision, and approved host-system compatibility before selecting a replacement.

