Product Description
The TRICONEX 4351B Tricon Communication Module (TCM), identified as TCM-B Copper Communication Module in the supplied listing, provides communication interfaces for compatible Tricon safety and process-control systems. It enables data exchange between Tricon controllers, engineering workstations, external host computers, and compatible industrial devices through copper Ethernet and serial communication connections.
The 4351B features two 10/100Base-T copper Ethernet ports and four serial ports supporting RS-232/RS-485 communication through DB-9 connectors. Supported communication functions include TriStation, Modbus, TCP/IP, SNTP, TSAA, and peer-to-peer communication, depending on the selected port and system configuration. It is intended for compatible Tricon v10.3 and later systems. Confirm controller version and logical-slot compatibility before ordering or replacing an existing module.
Product Parameters
Brand: TRICONEX
Model: 4351B
Product Name: TCM-B Copper Communication Module
Module Type: Tricon Communication Module (TCM)
Series: Tricon Safety Instrumented System
Part Number: 4351B; verify the complete assembly number on the unit label
Ethernet Ports: 2 copper Ethernet ports
Ethernet Interface: 10/100Base-T, RJ-45
Serial Ports: 4 RS-232/RS-485 ports, DB-9 connectors
Port Isolation: 500 VDC
Supported Protocols: TriStation, Modbus RTU/ASCII, Modbus TCP, TCP/IP, SNTP, TSAA, and peer-to-peer communication, subject to port configuration
Serial Communication Speed: Up to 115.2 Kbps per port
System Compatibility: Tricon v10.3 and later; verify the installed system revision
Logic Power Consumption: Less than 10 W, according to the Tricon v9–v10 planning documentation
Status Indicators: PASS, FAULT, ACTIVE, FIRM, LINK, TX, and RX
Place of Manufacture: Not independently verified
Product Status: New – Open box, according to the supplied listing; confirm condition with seller
Dimensions: Not independently verified
Weight: Not independently verified
Power Requirements: Internal logic power supplied through the compatible Tricon chassis; confirm system requirements in the applicable manual
Country of Origin: Not independently verified
Discontinued: Current lifecycle status not confirmed
Q&A
Q1: What is the TRICONEX 4351B used for?
A: It provides Ethernet and serial communication interfaces for compatible Tricon safety controllers, supporting data exchange with engineering systems, host computers, and industrial devices.
Q2: What is the difference between the 4351B and 4352B?
A: The 4351B uses copper Ethernet connections, while the 4352B uses fiber-optic Ethernet connections. They are not interchangeable without verifying system configuration and communication requirements.
Q3: Is the 4351B compatible with all Tricon systems?
A: No. The 4351B is associated with Tricon v10.3 and later systems. It must also be compatible with the installed controller generation and logical-slot configuration.
Q4: Can the module be replaced while the controller is operating?
A: Tricon documentation indicates that a faulty TCM can be replaced while the controller is online, but the TCM does not provide a hot-spare feature. Follow the approved maintenance procedure for the specific installation.
Q5: What should be checked before purchasing?
A: Confirm the model number, assembly label, hardware revision, system version, Ethernet and serial interfaces, module condition, and compatibility with the existing Tricon configuration.
Recommended Models
- TRICONEX 4351A — Earlier-generation copper Ethernet communication module; verify system compatibility.
- TRICONEX 4352B — Fiber-optic Ethernet communication module for compatible Tricon systems.
- TRICONEX 4352A — Fiber-optic TCM variant for the applicable Tricon system generation.
- TRICONEX 4353 — Copper Ethernet TCM with an embedded OPC server.
- TRICONEX 4354 — Fiber-optic TCM with an embedded OPC server.
- TRICONEX 4351 — Earlier-generation copper Ethernet TCM for compatible Tricon systems.
- TRICONEX 4352 — Earlier-generation fiber-optic TCM for compatible Tricon systems.
- TRICONEX 4119 — Enhanced Intelligent Communication Module for compatible Tricon configurations.
- TRICONEX 4329 — Network Communication Module for compatible Tricon systems.
- TRICONEX 3008 — Main Processor Module for compatible Tricon systems.
- TRICONEX 3008N — Main Processor Module variant; verify exact hardware and firmware compatibility.
- TRICONEX 8311 — 24 VDC power module for compatible Tricon chassis.
- TRICONEX 8312 — 230 VAC power module for compatible Tricon chassis.
- TRICONEX 8110 — Main chassis for compatible Tricon system configurations.
- TRICONEX 8111 — Expansion chassis for compatible Tricon systems.
Note: These are related Triconex communication and system components, not guaranteed direct replacements for the 4351B. Confirm the controller version, logical-slot configuration, and exact part number before substitution.


