⚙️ Product Introduction
The KONGSBERG RCU500 (Part Number: 603108, Revision B1) is a high-performance Remote Controller Unit designed for marine automation, vessel control, and industrial process control systems.
Based on a PowerPC 8245 processor operating at 400 MHz, the RCU500 provides reliable real-time processing and communication between distributed I/O modules, field instruments, and centralized operator stations.
The controller features dual Ethernet interfaces, multiple RS232/RS422/RS485 serial ports, dual CAN bus interfaces, dual PROFIBUS interfaces, and an SPBus communication interface.
It also supports redundant controller configurations and hot replacement, helping maintain system availability in critical marine applications.
The RCU500 is suitable for K-Chief automation systems, AutoChief applications, dynamic positioning systems, engine monitoring, and offshore control installations.
📋 Product Datasheet & Technical Specifications
- Brand: Kongsberg Maritime
- Model: RCU500
- Part Number: 603108
- Revision: Rev.B1
- Series: RCU500 Remote Controller Series
- Product Name: Remote Controller Unit
- Country of Origin: Norway (individual manufacturing origin should be verified)
- Product Status: Legacy Industrial Automation Product
- Dimensions: 355 × 158 × 87 mm (H × W × D)
- Weight: Approximately 1.35 kg
- Power Supply: 24 VDC ±20% (19.2–28.8 VDC)
- Power Consumption: Maximum 20 W
🔍 Additional Technical Specifications
- Processor: PowerPC 8245
- CPU Speed: 400 MHz
- Internal Memory: 32 MB SDRAM
- Flash Memory: 16 MB
- Ethernet Interfaces: 2 × 10/100 Mbps
- RS232/RS422/RS485: 12 general-purpose serial interfaces
- Isolated Serial Interfaces: 4 × RS232/RS422/RS485
- CAN Bus: 2 × 1 Mbps
- PROFIBUS: 2 × 12 Mbps
- SPBus Interface: 1
- SPBus Communication: RS485 multidrop
- SPBus Speed: Maximum 2 MHz
- SPBus Isolation: 500 V
- Digital Inputs: 4
- Digital Outputs: 4
- Power Connectors: Screw terminals, 1.5 mm²
- Mounting: DIN rail
- Protection Rating: IP20
- Operating Temperature: 0°C to +70°C
- Storage Temperature: -25°C to +70°C
- Relative Humidity: Up to 98%, non-condensing
- Maximum Heat Dissipation: 20 W
- Watchdog: Integrated system watchdog
- Redundancy: Supports redundant RCU operation and hot replacement
- Standards: IEC 61131-2, IEC 60945, IACS E10, IEC 61508
⭐ Main Features & Benefits
- High-performance PowerPC-based processing.
- Real-time industrial control capabilities.
- Dual Ethernet communication interfaces.
- Multiple RS232, RS422, and RS485 interfaces.
- Dual CAN bus and PROFIBUS communication.
- Integrated SPBus interface for remote I/O systems.
- Supports redundant controller configurations.
- Hot replacement capability in redundant systems.
- Built-in self-test and diagnostic functions.
- Integrated watchdog and system status monitoring.
- Designed for continuous marine automation operation.
❓ Frequently Asked Questions (Q&A)
Q1: What is the KONGSBERG RCU500 used for?
A: It is a remote controller designed to execute real-time control applications, process field I/O data, and manage communication between marine automation equipment.
Q2: What is the part number of this controller?
A: The part number is 603108, and the specified hardware revision is B1.
Q3: Which processor does the RCU500 use?
A: It uses a PowerPC 8245 processor operating at 400 MHz.
Q4: What communication interfaces are available?
A: It provides dual Ethernet, RS232, RS422, RS485, CAN bus, PROFIBUS, and SPBus interfaces.
Q5: What is the operating voltage?
A: The nominal power supply is 24 VDC ±20%, with a maximum power consumption of 20 W.
Q6: Does the RCU500 support redundant operation?
A: Yes. It supports redundant controller configurations and hot replacement in compatible systems.
Q7: Is the RCU500 suitable for marine automation?
A: Yes. It is designed for marine process control, vessel automation, engine control, and offshore applications.
Q8: What is the difference between RCU500 and RCU501?
A: They are different controller models within the Kongsberg automation product family. Hardware interfaces, firmware, and application compatibility should be checked before substitution.
Q9: Is the RCU500 603108 Rev.B1 discontinued?
A: It is a legacy controller model. Confirm current manufacturer support and spare-parts availability before purchasing.
Q10: Can Rev.B1 replace Rev.A1?
A: Not automatically. Verify hardware compatibility, firmware versions, application software, system configuration, and communication settings before replacement.
🔩 Recommended KONGSBERG Related Models
- KONGSBERG RCU500 – Remote Controller Unit
- KONGSBERG RCU501 – Remote Controller Unit
- KONGSBERG RCU502 – Remote Controller Unit
- KONGSBERG RCU510 – Remote Control Unit
- KONGSBERG RCU400H – Remote Controller Unit
- KONGSBERG RDIOR400 – Remote Digital I/O and Relay Module
- KONGSBERG RSER200-4 – Serial Communication Module
- KONGSBERG RHUB200-5 – Remote I/O Hub
- KONGSBERG RMP200-8 – Remote Multipurpose I/O Module
- KONGSBERG RMP201-8 – Remote Multipurpose I/O Module
- KONGSBERG RMP420 – Remote I/O Module
- KONGSBERG RAIC400 – Remote Analog Input Module
- KONGSBERG SPBUS-HUB – Serial Process Bus Hub
- KONGSBERG K-Chief 500 – Marine Automation System
- KONGSBERG AutoChief – Marine Engine Control System
Note: These are related Kongsberg controllers, communication modules, and automation systems. They are not guaranteed direct replacements for RCU500.
🏭 Typical Industrial Applications
- Marine Automation Systems
- Ship Engine Control Systems
- K-Chief Vessel Automation
- AutoChief Propulsion Control
- Dynamic Positioning Systems
- Offshore Platform Automation
- Power Management Systems
- Remote I/O Processing
- Industrial Process Control
- Vessel Monitoring and Alarm Systems
📦 Ordering Information
The KONGSBERG RCU500 603108 Rev.B1 is a specialized marine controller designed for real-time processing, distributed I/O management, and reliable vessel automation.
Suitable for marine equipment maintenance, controller replacement, offshore automation projects, and industrial spare-parts inventory.
Please verify the complete part number, hardware revision, firmware compatibility, and physical condition before ordering.


