1. Product Introduction
The WOODWARD 5462-948 Rev F is an eight-channel thermocouple (T/C) input card designed for temperature signal acquisition in compatible Woodward industrial control systems.
The module receives temperature signals from thermocouple sensors and provides input data for monitoring and control applications. It is suitable for systems requiring multiple temperature measurement points, including industrial turbine control, engine monitoring, and power generation equipment.
With eight thermocouple input channels, the 5462-948 helps consolidate temperature measurements within a single control-system module. It is identified in Woodward parts inventories as an 8-channel T/C card.
This listing identifies the specific hardware as 5462-948 Rev F. Please verify the revision, connectors, rack configuration, and system compatibility before ordering or installation.
2. Datasheet & Technical Specifications
- Brand: Woodward
- Part Number: 5462-948
- Revision: Rev F
- Product Type: Thermocouple Input Card
- Module Function: Temperature Signal Acquisition
- Number of Input Channels: 8
- Input Signal Type: Thermocouple (T/C)
- Application: Industrial Temperature Monitoring
- Control System: Compatible Woodward control-system hardware
- Installation Type: Control-system module / card
- Measurement Purpose: Multiple-point temperature monitoring
- Input Isolation: Not confirmed for this exact revision
- Thermocouple Types Supported: Not confirmed for this exact revision
- Measurement Range: Not confirmed
- Input Accuracy: Not confirmed
- Resolution: Not confirmed
- Power Supply Requirements: Not confirmed
- Power Consumption: Not confirmed
- Operating Temperature: Not confirmed
- Manufacturer: Woodward, Inc.
3. Main Features
- Eight-channel thermocouple input capability
- Designed for temperature signal acquisition
- Supports multiple temperature measurement points
- Suitable for compatible Woodward control-system installations
- Useful for industrial equipment monitoring
- Revision-specific hardware identification
- Designed for integration into an existing control-system architecture
- Supports temperature monitoring in industrial and power generation applications
4. Typical Applications
- Industrial turbine temperature monitoring
- Gas turbine control systems
- Steam turbine monitoring
- Generator and power plant control systems
- Industrial engine temperature monitoring
- Exhaust temperature measurement applications
- Industrial process temperature monitoring
- Machinery condition monitoring
- Power generation equipment maintenance
- Industrial automation and control systems
5. Frequently Asked Questions
Q1: What is the Woodward 5462-948 Rev F?
A: It is an eight-channel thermocouple input card used for temperature signal acquisition in compatible Woodward control systems.
Q2: How many input channels does this card have?
A: The 5462-948 is identified as an 8-channel thermocouple card.
Q3: What type of signals does it receive?
A: It receives thermocouple temperature signals. The supported thermocouple types should be confirmed against the applicable system documentation.
Q4: Is this module suitable for turbine applications?
A: It is a temperature input card for compatible industrial control systems and may be used in turbine monitoring applications where the system configuration supports it.
Q5: Is Rev F interchangeable with Rev A?
A: Not automatically. Revision differences may affect hardware configuration or compatibility. Confirm the approved revision and installation documentation before replacement.
Q6: Can this card directly replace an RTD input module?
A: No. Thermocouple and RTD modules use different sensor input technologies. The replacement must match the installed sensor type and control-system configuration.
Q7: Does the module include a terminal block or cable?
A: Included accessories depend on the actual listing and supplied package. Please check the product photographs and seller confirmation.
Q8: What should I check before purchasing?
A: Confirm the complete part number, Rev F marking, connector arrangement, rack position, thermocouple configuration, and compatibility with the installed Woodward control system.
6. 15 Related Woodward Models
The following are related Woodward control-system modules and I/O components. They are listed for reference and are not confirmed direct replacements for the 5462-948.
- Woodward 5462-651 – Analog 8-Channel 4–20 mA Input Module
- Woodward 5462-950 – DCS Position Transducer Module
- Woodward 5462-952 – DCS Position Transducer Module
- Woodward 5462-958 – 501 Master CPU Module
- Woodward 5462-959 – 8-Channel RTD Module
- Woodward 5462-960 – CPU Module
- Woodward 5462-961 – CPU Module
- Woodward 5462-980 – CPU Module
- Woodward 5462-757 – 28-Channel Discrete Input Module
- Woodward 5462-758 – 28-Channel Discrete Output Module
- Woodward 5463-245 – 8-Channel Isolated J-Type Thermocouple Input Module
- Woodward 5463-338 – RTD Input Module
- Woodward 5463-388 – 8-Channel RTD Analog Input Module
- Woodward 5463-393 – 4–20 mA Analog Input Module
- Woodward 5463-396 – Thermocouple Input Module
7. Ordering Information
- Brand: Woodward
- Part Number: 5462-948
- Revision: Rev F
- Description: 8-Channel Thermocouple Input Card
- Condition: Listed as NEW; please refer to the actual seller listing and photographs for condition verification.
Please confirm the exact part number and revision before ordering. For replacement applications, verify the installed control-system hardware, sensor type, wiring, and approved configuration.
Contact us for availability, product photographs, technical assistance, and shipping information.


