⚙️ Product Introduction
The Woodward ESSE2-LL Electronic Speed Switch SA-3678-LL-2 is an electronic speed monitoring and switching device designed for industrial engine and generator control applications.
This unit is used to monitor engine speed signals and provide switching outputs when predefined speed conditions are reached. It can support engine starting sequences, overspeed protection arrangements, and generator control systems, depending on the installed configuration.
Designed for industrial operating environments, the ESSE2-LL provides an interface between engine speed sensing circuits and external control equipment. It is suitable for applications where dependable speed detection and switching signals are required.
Key Features
-
⚡ Electronic engine speed monitoring.
-
🔄 Speed-dependent switching operation.
-
🛡️ Support for engine protection and control systems.
-
⚙️ Integration with industrial engine control circuits.
-
🔧 Designed for generator and mechanical drive applications.
-
📊 Supports speed-related control and monitoring functions.
📊 Product Parameters / Datasheet
| Parameter | Description |
|---|---|
| Brand | Woodward |
| Model | ESSE2-LL |
| Part Number | SA-3678-LL-2 |
| Series | ESSE-2 Electronic Speed Switch |
| Product Name | Electronic Speed Switch |
| Place of Origin | United States (brand origin; manufacturing location unverified) |
| Product Status | Industrial electronic control component |
| Dimensions | Exact dimensions to be confirmed |
| Weight | Approx. 0.91 kg (ESSE-2 series specification) |
| Rated Power | DC power supply; 8–40 VDC version or other configuration to be verified |
| Discontinued Status | Current production status unconfirmed |
🔍 Technical Specifications
The Woodward ESSE-2 series provides two independent speed-switching channels. Its technical characteristics include:
-
Input signal sources: Magnetic pickup, alternator, ignition coil (option-dependent), or Mini-Gen signal generator.
-
Signal input: 1.2–130 Vrms.
-
Input impedance: 33 kΩ nominal.
-
Operating temperature: -40°C to +85°C.
-
Typical overspeed response: 75 ms.
-
Frequency range: Range 2, 325–10,000 Hz.
-
Environmental protection: Potted construction.
-
Relay switching outputs: Configuration-dependent.
The SA-3678-LL-2 suffix identifies the Range 2 version with electrical latch reset configuration. Verify the exact voltage variant and setpoint configuration before replacement.
🔧 Daily Maintenance & Care
1. Visual Inspection
-
Check the housing for cracks, corrosion, or physical damage.
-
Inspect terminals for oxidation and loose connections.
-
Ensure the mounting position is secure.
2. Electrical Inspection
-
Verify the DC supply voltage.
-
Check speed sensor wiring and signal connections.
-
Inspect relay output wiring for overheating or damage.
3. Signal Monitoring
-
Check magnetic pickup signal quality.
-
Confirm that the speed signal remains stable.
-
Verify switching points against the engine operating requirements.
4. Environmental Maintenance
-
Keep the installation area clean and dry.
-
Avoid excessive vibration and electromagnetic interference.
-
Check cable insulation and grounding regularly.
5. Functional Testing
-
Test both switching channels.
-
Verify setpoint and reset behavior.
-
Record inspection results and configuration changes.
🛠️ Troubleshooting & Common Problems
1. Speed Switch Does Not Activate
Possible causes:
-
Insufficient input signal.
-
Incorrect wiring.
-
Incorrect setpoint adjustment.
Solutions:
-
Check the speed sensor output.
-
Verify the input signal voltage and frequency.
-
Inspect the configured switching threshold.
2. Incorrect Speed Detection
Possible causes:
-
Magnetic pickup installation problems.
-
Electrical interference.
-
Unstable sensor connections.
Solutions:
-
Inspect the sensor gap and mounting.
-
Check cable shielding and grounding.
-
Verify signal waveform quality.
3. Relay Output Does Not Reset
Possible causes:
-
Electrical latch configuration.
-
Incorrect reset procedure.
-
Power supply interruption or wiring problems.
Solutions:
-
Check the reset configuration.
-
Follow the specified reset procedure.
-
Inspect the power supply and relay circuit.
4. Unstable Switching Operation
Possible causes:
-
Fluctuating speed input.
-
Loose terminals.
-
Incorrect frequency settings.
Solutions:
-
Check input signal stability.
-
Tighten electrical connections.
-
Verify the configured frequency range.
5. Abnormal Temperature or Device Failure
Possible causes:
-
Incorrect supply voltage.
-
Excessive environmental temperature.
-
Internal electronic component damage.
Solutions:
-
Check the supply voltage.
-
Improve cabinet ventilation.
-
Replace the unit if internal damage is suspected.
⚠️ Safety Precautions
-
Disconnect electrical power before servicing.
-
Installation must be performed by qualified technicians.
-
Confirm the correct supply voltage before connecting the device.
-
Never exceed the specified signal input limits.
-
Use appropriate grounding and cable shielding.
-
Do not bypass overspeed protection circuits.
-
Test relay outputs under controlled conditions.
-
Verify engine shutdown and emergency protection functions before returning equipment to service.
-
Follow the Woodward installation manual for wiring and commissioning.
⭐ Recommended 15 Other Woodward Models
| No. | Model | Product Description |
|---|---|---|
| 1 | SA-3678-LL-1 | ESSE-2 Speed Switch |
| 2 | SA-3678-LM-1 | ESSE-2 Speed Switch |
| 3 | SA-3678-MM-1 | ESSE-2 Speed Switch |
| 4 | SA-3678-MM-2 | ESSE-2 Speed Switch |
| 5 | SA-3678-PP-1 | ESSE-2 Speed Switch |
| 6 | SA-3678-PP-2 | ESSE-2 Speed Switch |
| 7 | SA-3678-AP-1 | ESSE-2 Speed Switch |
| 8 | SA-3678-AP-2 | ESSE-2 Speed Switch |
| 9 | SA-3678-AM-1 | ESSE-2 Speed Switch |
| 10 | SA-3678-AM-2 | ESSE-2 Speed Switch |
| 11 | SA-3678-AL-2 | ESSE-2 Speed Switch |
| 12 | SA-3681-ALR-2 | ESSE-2 Speed Switch |
| 13 | SA-3682-AN-2 | ESSE-2 Speed Switch |
| 14 | 9907-838 | Load Sharing Module |
| 15 | 8440-1667 | SPM-D Synchronizing System |
Recommended models are related Woodward product references. Confirm suffixes, voltage variants, and functional compatibility before ordering.
📌 Product Selection Notes
The Woodward ESSE2-LL SA-3678-LL-2 is intended for speed monitoring and switching applications in engine and generator systems. Its dual-channel design and latching configuration make it suitable for applications requiring independent speed-related switching functions.
For replacement purchases, check the complete part number, operating voltage, frequency range, switching setpoints, and reset configuration to ensure compatibility with the original installation.


