⚙️ Product Introduction
The Woodward 8406-113 Rev P EGCP-3 is an electronic generator control system designed for industrial power generation and engine-driven generator applications.
The EGCP-3 belongs to Woodward’s Generator Control Package product family. It provides integrated functions for generator monitoring, engine control, synchronization, load management, and protective supervision.
Designed for demanding power management environments, this controller helps coordinate generator operation and maintain stable electrical output. It can be used in industrial power plants, standby generator systems, marine power installations, and distributed generation facilities.
Key Features
-
⚡ Integrated generator set control and monitoring.
-
🔄 Automatic and manual generator operating modes.
-
🔌 Generator synchronization and circuit breaker control.
-
📊 Generator voltage, current, frequency, and power monitoring.
-
⚙️ Engine speed and operating parameter supervision.
-
🛡️ Generator protection and alarm management.
-
🔧 Configurable control parameters.
-
🏭 Suitable for industrial and marine generator applications.
The Rev P designation identifies a particular hardware revision. When replacing an existing controller, the revision and system configuration should be checked carefully.
📋 Product Parameters / Datasheet
| Parameter | Description |
|---|---|
| Brand | Woodward |
| Model | 8406-113 |
| Revision | Rev P |
| Series | EGCP-3 |
| Product Name | Engine Generator Control Package – Load Sharing |
| Place of Origin | USA |
| Product Status | Industrial electronic control equipment |
| Dimensions | 282 × 358 × 134 mm |
| Weight | Approx. 4.3 kg |
| Rated Power | 24 VDC, 20 W maximum |
| Power Supply Range | 18–32 VDC nominal |
| Operating Temperature | -20°C to +70°C |
| Storage Temperature | -30°C to +80°C |
| Communication | RS-232 / RS-422 / RS-485 |
| Discontinued Status | Current production status unconfirmed |
Specifications are based on EGCP-3 documentation and product references. Confirm the actual Rev P nameplate and condition before ordering.
woodward.com+2
🔍 Technical Specifications
-
Control Type: Microprocessor-based digital generator controller.
-
Generator Frequency Range: 40–70 Hz.
-
PT Input Range: 27–300 VAC.
-
CT Input: 0–5 A AC nominal, 7 A maximum.
-
Discrete Inputs: 16 channels.
-
Analog Inputs: 4–20 mA / 1–5 VDC.
-
Analog Outputs: 4–20 mA.
-
Discrete Outputs: 12 channels.
-
Serial Ports: 3 communication ports.
-
Display: Dual backlit LCD with keypad.
-
Power Consumption: 20 W nominal maximum rating.
The EGCP-3 LS supports synchronization and load sharing among multiple generators, with up to 16 generator units in a coordinated system.
Woodward+1
🔧 Daily Maintenance & Care
1. Visual Inspection
-
Check the controller housing and display for physical damage.
-
Inspect terminals and connectors for corrosion.
-
Ensure that mounting screws are secure.
2. Electrical Maintenance
-
Verify the 24 VDC power supply.
-
Inspect PT and CT wiring.
-
Check grounding and cable connections.
-
Look for signs of overheating.
3. Display and Control Inspection
-
Check LCD readability.
-
Verify keypad operation.
-
Review alarms and operating status.
-
Confirm that generator measurements are reasonable.
4. Communication Maintenance
-
Inspect RS-232, RS-422, and RS-485 connections.
-
Check communication cables and shielding.
-
Verify communication with other generator controllers.
5. Configuration Backup
-
Save operating parameters before making changes.
-
Record synchronization and load-sharing settings.
-
Maintain a history of maintenance and replacement activities.
🛠️ Troubleshooting & Common Problems
1. Controller Cannot Power On
Possible causes:
-
Incorrect DC supply voltage.
-
Loose power terminals.
-
Internal power circuit failure.
Solutions:
-
Check the 18–32 VDC nominal supply range.
-
Inspect wiring and terminal connections.
-
Arrange professional inspection if the controller remains inactive.
2. Generator Synchronization Failure
Possible causes:
-
Incorrect voltage or frequency measurements.
-
Incorrect phase sequence.
-
Improper synchronization settings.
Solutions:
-
Verify PT wiring and generator measurements.
-
Check frequency and phase conditions.
-
Review synchronization parameters.
3. Load Sharing Problems
Possible causes:
-
Incorrect load-sharing configuration.
-
Communication interruption.
-
Speed bias or voltage bias signal problems.
Solutions:
-
Inspect communication connections.
-
Check governor and AVR interfaces.
-
Verify load-sharing settings.
4. Abnormal Voltage or Current Readings
Possible causes:
-
Incorrect CT/PT wiring.
-
Wrong transformer ratios.
-
Loose sensing connections.
Solutions:
-
Check CT polarity and PT connections.
-
Verify configured ratios.
-
Compare readings with calibrated instruments.
5. Communication Failure
Possible causes:
-
Damaged serial cables.
-
Incorrect communication settings.
-
External controller malfunction.
Solutions:
-
Inspect serial connections.
-
Verify RS-232/422/485 configuration.
-
Check the communication status of connected equipment.
⚠️ Safety Precautions
-
Disconnect power before installation or maintenance.
-
Installation must be performed by qualified electrical personnel.
-
Never open an energized current transformer secondary circuit.
-
Verify PT and CT wiring before commissioning.
-
Use suitable grounding and electrical protection.
-
Do not change generator protection settings without authorization.
-
Ensure that independent synchronization and circuit-breaker protection systems are operational.
-
Keep the controller within its specified temperature and voltage limits.
-
Back up configuration data before replacing the controller.
⭐ Recommended 15 Other Woodward Models
| No. | Model | Product Description |
|---|---|---|
| 1 | 8406-114 | EGCP-3 Master Control |
| 2 | 8406-103 | EGCP-3 Digital Control |
| 3 | 8406-121 | EGCP-2 Generator Control |
| 4 | 8406-188 | Generator Control Module |
| 5 | 8440-2045 | EASYGEN-3400-5 Controller |
| 6 | 8440-1884 | EASYGEN-2500 Controller |
| 7 | 8440-2046 | EASYGEN Controller |
| 8 | 8440-1946 | LS-5 Circuit Breaker Control |
| 9 | 8440-1137 | Generator Control Module |
| 10 | 9905-797 | Digital Synchronizer |
| 11 | 9905-131 | 2301A Speed Control |
| 12 | 5463-305 | 4-Channel Final Driver |
| 13 | 8272-683 | Digital Reference Unit |
| 14 | 5500-310 | Electronic Control Board |
| 15 | 8440-1885 | EASYGEN Generator Controller |
Note: The above are additional Woodward product references. They are not necessarily interchangeable with 8406-113.
📌 Product Selection Reminder
When purchasing the Woodward 8406-113 Rev P EGCP-3, pay attention to the hardware revision, serial number, connector condition, display functionality, and original configuration.
For generator replacement projects, matching the load-sharing model and communication settings is essential to ensure reliable operation.


