GE 36B605594AEG01 ARCNET I/F Communication Card
Product Overview
The GE 36B605594AEG01 ARCNET I/F Communication Card is a dedicated industrial communication interface designed to support ARCNET-based data exchange within GE control and automation systems. Built for deterministic communication and long-term stability, this card enables reliable real-time data transfer between controllers, remote I/O, and distributed subsystems in demanding industrial environments.
Its rugged hardware design and proven ARCNET protocol support make it well suited for legacy systems as well as long-life industrial installations where communication reliability is critical.
Product Introduction
The 36B605594AEG01 functions as a high-integrity ARCNET interface card, allowing seamless integration of ARCNET communication networks into GE control architectures. It ensures consistent message timing, low latency, and noise-resistant communication, even in electrically harsh environments.
Designed for continuous industrial operation, the card supports stable data exchange across control racks, operator stations, and distributed automation nodes.
Product Parameters
| Parameter | Specification |
|---|---|
| Model | 36B605594AEG01 |
| Manufacturer | General Electric (GE) |
| Product Type | ARCNET Interface Communication Card |
| Communication Protocol | ARCNET |
| Data Transfer Mode | Deterministic token passing |
| Network Topology | Star / Bus (ARCNET compatible) |
| Interface Type | Industrial backplane / slot card |
| Data Rate | Up to 2.5 Mbps |
| Signal Isolation | Yes |
| Operating Voltage | Supplied by system backplane |
| Connector Type | ARCNET coax / industrial connector |
| Diagnostics | Status indicators and fault detection |
| Operating Temperature | 0°C to +55°C |
| Storage Temperature | -20°C to +70°C |
| Environmental Rating | Industrial |
| Installation | Rack-mounted |
| Origin | United States |
Product Datasheet
| Item | Data |
|---|---|
| Communication Latency | Deterministic, low latency |
| Noise Immunity | High resistance to EMI |
| Protocol Handling | Hardware-assisted ARCNET control |
| Compatibility | GE control and I/O systems |
| System Integration | Plug-in communication expansion |
| Reliability | Designed for 24/7 operation |
| Maintenance Requirement | Minimal |
| Mechanical Design | Vibration-resistant PCB |
| Electrical Protection | Overvoltage and signal protection |
Application Areas
The GE 36B605594AEG01 is commonly used in industrial systems requiring stable and deterministic communication:
- Power Generation – turbine control and auxiliary systems
- Process Automation – distributed control systems (DCS)
- Oil & Gas – compressor and pipeline control networks
- Manufacturing Plants – legacy automation systems
- Water & Wastewater Treatment – remote I/O communication
- Industrial Utilities – monitoring and supervisory systems
Product Usage Instructions
- Installation
- Power down the control system before installation.
- Insert the communication card firmly into the designated slot.
- Network Connection
- Connect ARCNET communication cables securely.
- Ensure correct termination and network topology.
- Configuration
- Assign node addresses according to system requirements.
- Verify communication parameters in the controller configuration.
- Commissioning
- Power up the system and observe status indicators.
- Confirm stable communication with connected ARCNET nodes.
- Maintenance
- Periodically inspect connectors and cabling.
- Replace the card if persistent communication faults occur.
Product Technical Explanation
The 36B605594AEG01 ARCNET I/F Communication Card uses the ARCNET token-passing protocol to guarantee deterministic data transfer between network nodes. Unlike collision-based networks, ARCNET ensures predictable communication timing, which is essential for real-time industrial control applications.
Hardware-based protocol handling reduces CPU load on the host controller while improving communication stability. Integrated isolation and noise protection safeguard signal integrity in electrically noisy industrial environments, extending system reliability and operational life.
Key Technical Advantages
- Deterministic ARCNET communication
- High noise immunity for industrial environments
- Reliable long-term operation
- Seamless integration with GE control systems
- Minimal maintenance requirements
- Stable performance for legacy automation networks
Recommended GE Communication & Control Models
| Model | Description |
|---|---|
| 36B605594AEG02 | ARCNET interface card, enhanced diagnostics |
| 36B605594AEG03 | High-reliability ARCNET communication card |
| 36B605595AFG01 | Industrial communication processor |
| 36B605596AFG02 | Control system interface module |
| 36B605597AFG03 | Network expansion communication card |
| 36B605598AFG04 | Distributed I/O communication module |
| 36B605599AFG05 | ARCNET-compatible controller card |
| 36B606000AFG01 | High-speed industrial interface card |
| 36B606001AFG02 | Redundant communication interface |
| 36B606002AFG03 | Multi-node network controller |
| 36B606003AFG04 | Communication card with diagnostics |
| 36B606004AFG05 | Industrial network gateway |
| 36B606005AFG06 | Control rack communication module |
| 36B606006AFG07 | ARCNET bus interface board |
| 36B606007AFG08 | Industrial data communication card |
| 36B606008AFG09 | Network synchronization module |
| 36B606009AFG10 | Control system expansion card |
| 36B606010AFG11 | Legacy system communication interface |
| 36B606011AFG12 | Industrial ARCNET interface |
| 36B606012AFG13 | High-stability communication card |
🔗 Product sourcing and technical support:
www.dcsplcsystem.com
★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
One year warranty, special discount after sale
The company focuses on DCS, PLC, robot, large servo four systems
The main products are all kinds of module/card, controller, touch screen, servo drive
The company’s advantages: the supply of imported original products, professional production of accessories
Fast delivery time, complete supply, The seller has more than $1526000 worth of industrial control products inventory
We Can transport to the world！！！
——————————————————————————————————————
[service contact information]
Purchase and consultation hotline: +8613365909307 (Whatsapp/ Wechat)
E-mail: dcsplcsales@gmail.com
Contact Person: Simon
① 24-hour email reply (12 hours);
② For shipment to countries outside Asia, please contact the seller.
If you want, I can also prepare a professional ARCNET network topology diagram or a system integration guide for this communication card.
E-mail:dcsplcsales@gmail.com
Wechat:+86 13365909307
Phone:+86 13365909307