---

Automated Logic BACnet M0100 Control Module

The BACnet M0100 Control Module by Automated Logic is an industrial-grade controller designed for integration into building automation systems (BAS). It provides reliable control of HVAC, lighting, and energy management systems while communicating via the BACnet protocol. Engineered for commercial and industrial facilities, the M0100 ensures precise monitoring, automated control, and seamless integration into BACnet/IP or BACnet MS/TP networks.

---

Product Parameters & Technical Specifications

⚙️ Parameter	Specification
Manufacturer	Automated Logic
Model	BACnet M0100
Product Type	Control Module
Protocol	BACnet/IP, BACnet MS/TP
Input/Output	Analog and digital I/O support
I/O Channels	Multi-channel configurable inputs and outputs
Power Supply	24 VDC nominal
Mounting	Panel or DIN rail mount
Operating Temperature	0°C to +50°C
Storage Temperature	-20°C to +70°C
Humidity	5–95% non-condensing
Diagnostics	Status LEDs and BACnet monitoring
Reliability	Industrial and commercial continuous operation
Environmental Rating	IEC standard for indoor BAS equipment
Origin	United States 🇺🇸

---

Product Datasheet (Functional Overview)

📄 Item	Description
Primary Function	Building automation control module
System Integration	Seamless BACnet/IP and MS/TP integration
Signal Management	Analog/digital input/output processing
Fault Detection	Real-time diagnostics and alarm reporting
Connectivity	Supports remote monitoring through BAS
Reliability	Designed for 24/7 operation in commercial buildings

---

Applications

The BACnet M0100 Control Module is widely used in:

• Commercial building HVAC systems
• Energy management and optimization
• Lighting control systems
• Industrial process monitoring
• Educational and healthcare facilities
• Government and institutional buildings
• Remote building management and monitoring

---

Product Usage Instructions

1. Installation
   • Mount the module on a panel or DIN rail inside the control cabinet.
   • Ensure adequate ventilation and ambient temperature control.
2. Power Connection
   • Connect a stable 24 VDC power source.
   • Verify proper wiring for analog and digital inputs/outputs.
3. Network Configuration
   • Assign BACnet device instance numbers and network parameters.
   • Configure input/output mappings and control sequences via Automated Logic software.
4. Operation
   • The module continuously monitors inputs and controls outputs according to programmed logic.
   • Provides real-time BACnet communication and diagnostics to the BAS network.
5. Maintenance
   • Periodically inspect connections, mounting integrity, and ventilation.
   • Monitor LEDs and BAS diagnostics for fault detection.
   • Replace only with compatible Automated Logic M0100 modules.

---

Technical Description

The BACnet M0100 Control Module functions as a centralized building automation controller, integrating inputs from sensors, executing programmed control logic, and commanding outputs to HVAC, lighting, or other building systems. Its BACnet connectivity allows seamless communication across multiple devices, supporting efficient energy management and reliable operation in commercial and industrial environments.

---

Recommended Automated Logic Models

Below is a randomly generated list of 20 Automated Logic controllers and modules suitable for similar BAS applications:

🔧 Model	Description
M0100	BACnet Control Module
M0101	Analog Input Module
M0102	Digital Output Module
M0103	Temperature Control Module
M0104	Lighting Control Module
M0105	Energy Monitoring Module
M0106	Multi-Channel Input Module
M0107	Multi-Channel Output Module
M0108	HVAC Control Module
M0109	Remote I/O Module
M0110	Zone Control Module
M0111	Field Sensor Interface Module
M0112	Actuator Control Module
M0113	Network Gateway Module
M0114	BACnet/IP Communication Module
M0115	BACnet MS/TP Communication Module
M0116	Process Monitoring Controller
M0117	Automation Expansion Module
M0118	Web-Connected Control Module
M0119	Redundant Control Module

---

For sourcing, availability, and technical support, please visit:
🔗 www.dcsplcsystem.com

---

I

★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★

One year warranty, special discount after sale

The company focuses on DCS, PLC, robot, large servo four systems

The main products are all kinds of module/card, controller, touch screen, servo drive

The company’s advantages: the supply of imported original products, professional production of accessories

Fast delivery time, complete supply, The seller has more than $1526000 worth of industrial control products inventory

We Can transport to the world！！！

——————————————————————————————————————
[service contact information]

 

Purchase and consultation hotline: +8613365909307 (Whatsapp/ Wechat)

E-mail: dcsplcsales@gmail.com

Contact Person: Simon

① 24-hour email reply (12 hours);

② For shipment to countries outside Asia, please contact the seller.