0PB0200.1
The 0PB0200.1 is a compact power supply designed for DIN rail mounting. Manufactured by B & R Automation as part of the 0PS Power Supplies series, it offers dual-channel input and operates at 24 V DC. With IP20 protection, it includes relay outputs and 1 N/C auxiliary contact.

0PS102.0
The 0PS102.0 pressure switch operates within a pressure range of 0.2 to 2 bar, features a switching tolerance of ±0.15 bar, and is constructed with a brass enclosure. Part of the 0PS Power Supplies series by B & R Automation, it supports a maximum pressure of 6 bar.

0PS1020.0
B&R Automation’s 0PS1020.0 is a compact power supply module featuring top-hat rail construction for easy installation. As part of the 0PS product series, it supports a wide AC and DC input range and outputs reliable voltage and current outputs of 24 VDC and 2.1 A, respectively. It weighs only 240 grams.

0PS1025.2
B&R Automation 0PS1025.2 power supply boasts an MTBF of over 500,000 hours per IEC 61709 standards, ensuring long-term reliability. High efficiency of over 86% at 230 VAC and nominal values.

0PS104.0
The 0PS104.0 is a well-built power supply module under the 0PS product line. Designed and engineered by B&R Automation, this power supply unit achieves an overall efficiency of 90% at rated AC voltage. It has an approximate mean time between failures of 500,000 hours and a typical power loss of 11.4 W.

0PS1040.0
The B & R Automation 0PS1040.0, part of the 0PS Power Supplies series, is a pressure sensor with a range of 0 to 40 bar. It features stainless steel wetted parts and a 3-pin M12 electrical connector. The sensor operates within a temperature range of -20 degrees C to +80 degrees C.

0PS1042.2
Derived from B&R Automation’s exclusive 0PS product line, the 0PS1042.2 features lightweight construction and high efficiency at rated operating conditions. It performs well at a wide humidity, temperature, and input range. It supports single-phase systems with an input frequency range of 45 to 65 hertz.

0PS105.1
The 0PS105.1 is a lightweight 0PS module designed by B&R Automation for small automation systems. It supports horizontal DIN rail mounting and facilitates cooling via normal convection. Like most 0PS power supplies, this unit boasts a high MTBF and efficiency of 520,000 hours and 90%, respectively.

0PS1050.1
B&R Automation 0PS1050.1 power supply provides a power failure bypass capability of over 20 ms at 120 VAC. Equipped with transient surge protection, it safeguards against unexpected voltage spikes.

0PS110.1
Developed by B&R Automation under the 0PS power supply series, the 0PS110.1 boasts high power back immunity and overvoltage protection. It features an efficiency of 90%, a nominal output of 24 VDC, and an MTBF of 425,000 hours. Like other 0PS units, it facilitates cooling via natural convection.

0PS110.2
The 0PS110.2 is a pressure sensor with a 0-10 bar measuring range. Manufactured by B & R Automation under their 0PS Power Supplies series, it operates on 24 V DC with an enclosure rating of IP67. The sensor has a stainless steel housing with an M12 electrical connection.

0PS1100.1
The 0PS1100.1 power supply by B & R Automation offers a supply voltage of 24 V DC and an operating temperature range from -40°C to +85°C. Included in the 0PS Power Supplies series, it features IP67 protection and a stainless steel housing. Additionally, it supports M12, 4-pin electrical connections.

0PS120.1
The 0PS120.1 is a pressure sensor with a stainless steel housing and an approximate weight of 120 grams. Manufactured by B & R Automation as part of the 0PS Power Supplies series, it operates within a range of -20°C to +80°C and features a 4-20 mA output signal with an IP67 protection class.

0PS1200.1
Part of the powerful 0PS product series, the 0PS1200.1 boasts high efficiency and output current during operation. Designed by B&R Automation for single-phase AC systems, this 0PS power supply outputs a stable DC voltage of up to 24VDC and a continuous current of 20 A. It uses galvanized steel sheet for its housing.

0PS3050.1
The B & R Automation 0PS3050.1, part of the 0PS Power Supplies, is a stainless steel pressure sensor with a measuring range of 0-50 bar. It features an output signal of 4-20 mA and an operating temperature range of -20 to +80 degrees C. The sensor has an IP65 enclosure rating.

0PS310.1
The B&R Industrial Automation 0PS310.1 power supply offers a 24 VDC output at 10 A, ideal for industrial applications. It supports an input range of 400 to 500 VAC.

0PS3100.1
The B&R Automation 0PS3100.1 power supply operates with efficient ventilation via normal convection, rated IP20 for solid object protection according to EN 60529 standards.

0PS320.1
Originally developed by B&R Automation, the 0PS320.1 is one of the most compact power supply units under the 0PS product line for three-phase AC systems. It weighs only about 1.8 kilograms and measures 150 x 124 x 121 mm. Without ventilation fans, this unit facilitates cooling via natural air convection.

0PS3200.1
The 0PS3200.1 is a 0PS power supply unit engineered by B&R Automation for three-phase AC systems. It can provide a stable DC output of 24 V and an output current of 20 A below an operating temperature of 55 C. Similar to the other three-phase 0PS units, this product has a power back immunity of 35 VDC.

0PS340.1
The 0PS340.1 power supply by B&R Automation delivers 40 A and features efficient cooling through normal convection, with a typical efficiency of 92.5% at 400 VAC.

0PS3400.1
The 0PS3400.1 is one of B&R Automation’s most advanced power supply units under the 0PS series. It features a closed metal housing made mainly of galvanized steel sheet and aluminum side panels. It weighs 3200 grams and supports horizontal top-hat rail installations. Like other 0PS units, this product is CE-approved.

3PS476.90-1
The 3PS476.90-1 proximity switch features a cylindrical M18 brass housing and operates at 10-30 VDC with a PNP output type. Manufactured by B & R Automation under the 0PS Power Supplies series, it offers IP67 protection and supports LED status indication for convenient monitoring.

9A0004.04
The 9A0004.04 power supply is manufactured by B & R Automation. This component is part of the 0PS Power Supplies series and features a light preload specification. It has a length of 53.6 mm and a height of 24 mm. The steel construction ensures durability.

9A0004.06
The 9A0004.06 clamping element, part of the 0PS Power Supplies series by B & R Automation, is made from durable steel with a black oxide finish. It features a threaded connection of M10 and a clamping force of up to 18 kN. The element measures 40 mm in length and weighs 0.12 kg.

9A0004.11
The 9A0004.11 is a compact power supply accessory with dimensions of 30mm x 16mm x 2mm. Manufactured by B & R Automation as part of the 0PS Power Supplies series, it is made of zinc-plated steel. It supports operating temperatures from -40°C to 120°C and complies with DIN 2093 standards.

9A0004.12
The 9A0004.12 power supply offers a motor power of 7.5 kW, operates on a 3-phase system, and features a speed of 2950 rpm. Part of the 0PS Power Supplies series by B & R Automation, it is rated at 15.2 amps and includes IP55 protection with a B3 foot-mounted design.

9A0100.11
The 9A0100.11 is a flexible coupling designed with a torque rating of 8 Nm and a length of 40 mm. Manufactured by B & R Automation as part of their 0PS Power Supplies series, it supports a maximum speed of 7000 RPM. This polyurethane coupling operates within a temperature range of -30°C to +80°C.

9A0100.12
The 9A0100.12 is a high-quality stainless steel component with a polished finish. Manufactured by B & R Automation, it belongs to the 0PS Power Supplies series and features a wire diameter of 1.2 mm. This product supports a maximum load of 50 N and operates between -20°C to 120°C.

9A0100.14
The 9A0100.14 solenoid valve is a direct acting device designed for 24V DC systems. Manufactured by B & R Automation as part of the 0PS Power Supplies line, it has a robust brass body. This valve features IP65 protection and operates between -10°C and +90°C.