8YS-K0015R0.019-0
The B & R Automation 8YS-K0015R0.019-0, part of the 8YS Series, operates at a voltage of 640 VDC. This 3-phase motor features self-cooling and an IP65 protection rating. It runs at a nominal speed of 1500 RPM and uses a multi-turn encoder.

8YS-K0020R0.006-0
The 8YS Series includes the 8YS-K0020R0.006-0 servo motor that operates at up to 2500 RPM and delivers 2.5 Nm of torque output while weighing only 5 kg with IP65 protection.

8YS-K0055R0.005-0
The 8YS-K0055R0.005-0 by B & R Automation is part of the 8YS Servo Motors series, featurin
8F1CB00X5.31110-0
The 8F1CB00X5.31110-0 pneumatic cylinder features a bore size of 32 mm and operates within a pressure range of 1 to 10 bar. Part of the ACOPOStrak Systems series from B & R Automation, it comes with an adjustable air cushion and is constructed with an anodized aluminum body.

8F1CB00X8.31110-0
The 8F1CB00X8.31110-0 system features a brass body with an NBR seal, a flow rate of 2.1 m³/h, and operates within a pressure range of 0.5 to 10 bar. Part of the ACOPOStrak Systems by B & R Automation, it is designed with IP65 protection and supports 230V AC at 50/60Hz.

8F1CI00X5.31110-0
The 8F1CI00X5.31110-0 inductive proximity sensor operates on a 12-24 V DC voltage and has a sensing distance of 5 mm. Part of the ACOPOStrak Systems by B & R Automation, it includes IP67 protection and an impressive switching frequency of 1000 Hz.

8F1CP0X38.11110-0
The 8F1CP0X38.11110-0 by B & R Automation is part of the ACOPOStrak Systems, designed as a ball screw support unit. It features angular contact ball bearings with a shaft diameter of 10 mm. The unit supports a maximum allowable axial load of 7.35 kN and has a light bearing preload.

8F1CU0001.313U0-0
The 8F1CU0001.313U0-0 is a foot-mounted motor delivering a rated power of 1.0 kW at 1500 rpm. Manufactured by B & R Automation within the ACOPOStrak Systems series, it operates at 400 V with a frequency of 50 Hz. This motor features IE3 efficiency and IP55 protection.

8F1GC.A066.BA000-1
The 8F1GC.A066.BA000-1 from B & R Automation’s ACOPOStrak Systems operates with a rated voltage of 690 V AC. It features a control voltage of 230 V AC at 50/60Hz and has an impressive mechanical life of 10 million operations. This component weighs 0.55 kg.

8F1GC.A066.CA000-1
The 8F1GC.A066.CA000-1 cable features CAT6 Ethernet capability, a length of 1 meter, and shielded (STP) construction. As part of the ACOPOStrak Systems series by B & R Automation, it supports a maximum data rate of 1 Gbps and operates within a temperature range of -20 degrees C to +60 degrees C.

8F1GC.AD66.BA000-1
The 8F1GC.AD66.BA000-1 module features a DPDT contact configuration and operates within -20°C to +60°C. Part of the ACOPOStrak Systems by B & R Automation, it boasts a compact polycarbonate enclosure and a mechanical life of 10 million operations.

8F1GC.AD66.CA000-1
The 8F1GC.AD66.CA000-1 is a panel-mounted component made from stainless steel, offering a robust design. Manufactured by B & R Automation as part of the ACOPOStrak Systems, it operates within a temperature range of -20 degrees C to +80 degrees C. It features IP67 ingress protection.

8F1I01.AA66.0000-1
The 8F1I01.AA66.0000-1 inductive proximity sensor offers a sensing distance of 8 mm, operates on 10-30 V DC, and provides a maximum switching frequency of 40 kHz. Part of the ACOPOStrak Systems by B & R Automation, it features an IP67-rated enclosure for robust performance.

8F1I01.AB2B.0000-1
The B & R Automation 8F1I01.AB2B.0000-1 is an 8-Function IO Module in the ACOPOStrak Systems series, offering individually configurable channels. It supports an input voltage range of 11–30 VDC and has short-circuit and overload protection. The module’s signal delay is ≤ 1 ms.

8F1I01.BA2B.0000-1
The 8F1I01.BA2B.0000-1 sensor has a sensing distance of 4 mm, a cylindrical M12 housing made from nickel-plated brass, and operates at a supply voltage range of 10 to 30 V DC. Part of the ACOPOStrak Systems by B & R Automation, it features IP65 protection.

8F1I01.BB4B.0000-1
The 8F1I01.BB4B.0000-1 proximity sensor features a sensing distance of 4 mm, a PNP normally open output type, and an IP67 enclosure rating. Part of the ACOPOStrak Systems from B & R Automation, it operates within -25 degrees C to +70 degrees C and includes short-circuit and overload protection.

8F1OA.01B.0000-1
The 8F1OA.01B.0000-1 features an effective electrical stroke of 100 mm, a resistance of 5 k? ~20%, and operates within a temperature range of -30 degrees C to +100 degrees C. Part of the ACOPOStrak Systems by B & R Automation, it offers IP40 protection and precise repeatability of less than 0.01 mm.

8F1TCA.GAT01000I-1
The 8F1TCA.GAT01000I-1 is an advanced module with a maximum input current of 31A. Developed by B & R Automation, it is part of the ACOPOStrak Systems and features a switching frequency of 40 kHz. The unit boasts Type 12 protection and operates at up to 4000 meters elevation.

8F1TCA.GMS00000I-1
The 8F1TCA.GMS00000I-1 by B & R Automation is part of the ACOPOStrak Systems and features a polycarbonate enclosure. It operates with a rated voltage of 230 V AC and a frequency of 50/60 Hz. This single-phase device has IP20 protection and is designed for DIN rail mounting.

8YF1I01.BA2B.00-1
The 8YF1I01.BA2B.00-1 module operates at 24 VDC, offers a power rating of 48 W, and