PART NUMBER | MPN DESCRIPTION STOCK LEVEL
AKM21G-ACSN2-02
The AKM21G-ACSN2-02, part of Kollmorgen’s AKM Synchronous Servo Motors, features a continuous stall torque of 0.5 N-m. This motor has a maximum speed of 7800 RPM and a rated power of 190 Watts. It also offers a peak stall torque of 1.51 N-m, ensuring high precision performance.

AKM21G-ANM22-00
The AKM21G-ANM22-00 is a synchronous servomotor in the AKM series that features a smooth shaft and a 24V holding brake. The motor has a flange size of 58 mm and portrays standard customization.

AKM21G-ANMNAD-00
The AKM21G-ANMNAD-00 servo motor features a round mounting configuration with a NEMA 42 frame size. Manufactured by Kollmorgen as part of the AKM Synchronous Servo Motors series, it operates within a temperature range of -40 to 100 degrees C. It supports dual-channel quadrature encoder output.

AKM21G-BNB22-00
The AKM21G-BNB22-00 is a synchronous DC servomotor that incorporates a comcoder with 2048 PPR feedback unit and a 24V holding brake. The motor has a rotor length of 1 and G winding type.

AKM21G-BNBN2-00
The AKM21G-BNBN2-00 is a controller module featuring electrical isolation. Kollmorgen’s AKM Synchronous Servo Motors includes this module, supporting a power supply of 100-240 VAC. It is equipped with two CAN interfaces and can be screw-mounted with the TB712 terminal block.

AKM21G-BNM22-00
The AKM21G-BNM22-00, part of the Kollmorgen AKM series, is a 230V, 3-phase synchronous servo motor commonly used in industrial automation. With a rated load of 2 HP, this motor provides a standstill torque of 0.50 Nm and a peak torque of 1.51 Nm. The winding resistance is 1.44 Ω, and the winding inductance is 2.18 mH.

AKM21G-BNMN2-00
The AKM21G-BNMN2-00 is a DC servo motor with a power rating of 0.19kW. Manufactured by Kollmorgen, this motor belongs to the AKM Synchronous Servo Motors and operates at a frequency of 60Hz. It supports a speed range of up to 4000 RPM and has a voltage rating of 75V.

AKM21G-BNPNC-00
The AKM21G-BNPNC-00 servo motor is an electrically isolated controller module with 2 CAN interfaces and operates within an input voltage range of 100-240 VAC. Part of the AKM Synchronous Servo Motors by Kollmorgen, it features network capability and has a power consumption of 14.5 watts.

AKM21G-BSCN2-03
Unleash the power of the AKM21G-BSCN2-03 servomotor from Kollmorgen! Weighing just 0.82kg, this motor is a lightweight powerhouse, capable of delivering a peak current of 19.5A and a peak torque of 1.51Nm, ensuring efficient and robust performance.

AKM21G-BSMN1-02
The AKM21G-BSMN1-02 is a synchronous servomotor in the AKM series that portrays special customization. The motor is equipped with a comcoder with 1024 PPR feedback device and a special shaft.

AKM21G-BSMN2-03
The AKM21G-BSMN2-03 is a synchronous servomotor in the AKM series that features a comcoder with 1024 PPR as its feedback unit. The motor has a special shaft and portrays special customization.

AKM21G-CKCNEM-00
The AKM21G-CKCNEM-00 servo motor delivers a continuous stall torque of 0.5 Nm and a peak stall torque of 1.51 Nm, operating at a maximum speed of 7800 RPM. Part of the AKM Synchronous Servo Motors series from Kollmorgen, it is CE, cRUus, EAC certified, and offers a rotor inertia of 0.0000107 kg-m².

AKM21G-CKGN2-00
The AKM21G-CKGN2-00 is a synchronous servomotor in the AKM series that is equipped with a comcoder with 2048 PPR as its feedback unit. The motor features an open keyway shaft and depicts standard customization.

AKM21G-ENBN2-00
The AKM21G-ENBN2-00 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM21G-ENCN2-00
The AKM21G-ENCN2-00 is state-of-the-art motor designed by Kollmorgen. The motor features a very compact design, generates a high-power density and maintains high accuracy during operation. The operation of this sophisticated industrial motor is also characterized by an exceptionally low cogging.

AKM21G-ENGN2-00
The AKM21G-ENGN2-00 is state-of-the-art motor designed by Kollmorgen. The motor features a very compact design, generates a high-power density and maintains high accuracy during operation. The operation of this sophisticated industrial motor is also characterized by an exceptionally low cogging.

AKM21G-ENMN2-00
The AKM21G-ENMN2-00 is a synchronous servomotor intended for drives used in industrial environments. The motor sports a smooth shaft and G winding type. It relies on comcoder with 2048 PPR for feedback.

AKM21G-ENSN2-02
The AKM21G-ENSN2-02 is a controller module requiring an input voltage range of 100-240 VAC. As part of Kollmorgen’s AKM Synchronous Servo Motors, it features two CAN interfaces and is electrically isolated. The module has network capability and consumes 14.5 watts of power.

AKM21G-SSMNEH-02
The AKM21G-SSMNEH-02 is a compact synchronous servo motor with a motor weight of just 0.82 kg. Manufactured by Kollmorgen as part of their AKM Synchronous Servo Motors series, the motor offers a maximum speed of 7800 RPM. It features a peak stall torque of 1.51 N-m.

AKM21I-ANMN2-02
The AKM21I-ANMN2-02 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM21S-ANMNR-03
The Kollmorgen AKM21S-ANMNR-03 is a servo motor from the AKM Synchronous Servo Motors, boasting a rated speed of 4000 RPM. It features an incremental encoder type and operates at a voltage of 230 V. Weighing just 0.64 kg, the motor delivers a continuous torque of 0.52 Nm.

AKM22C-ACBNAA-01
The Kollmorgen AKM22C-ACBNAA-01 is part of the AKM Synchronous Servo Motors series, offering a continuous stall torque of 0.84 N-m. It features a peak stall torque of 2.73 N-m and a thermal resistance of 1.19 °C/watt. This motor includes an IP54 standard rating.

AKM22C-ACBNDA-00
The Kollmorgen AKM22C-ACBNDA-00 is part of the AKM Synchronous Servo Motors series, delivering a continuous stall torque of 0.84 N-m. It features a peak stall torque of 2.73 N-m and a maximum speed of 8000 rpm at 400/480 VAC. The motor weighs just 1.1 kg.

AKM22C-ACBNR-00
The AKM22C-ACBNR-00 servo motor offers an output signal of 4-20 mA, a power supply requirement of 24 VAC/DC, and a stainless steel construction. Part of the AKM Synchronous Servo Motors by Kollmorgen, it includes IP67 protection and a mounting type of flange mount.

AKM22C-ACCNLB-00
The AKM22C-ACCNLB-00 is a Size 2 synchronous servo motor with a rated torque of 0.63 Nm. Manufactured by Kollmorgen, it belongs to the AKM Synchronous Servo Motors series and features a resolver (analog) feedback type. The motor operates at 3000 RPM and comes with an IP65 protection rating.

AKM22C-ACFNR-00
The AKM22C-ACFNR-00 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM22C-ANB21-00
The AKM22C-ANB21-00 is a synchronous servomotor in the AKM series that delivers best-in-class performance. The motor is equipped with a comcoder with 1024 PPR as its feedback unit. It comes with a smooth shaft without a shaft seal.

AKM22C-ANB2AB00
The AKM22C-ANB2AB00 is a brushless synchronous servomotor in the AKM series that comes with a smooth shaft and rotatable angular connectors. The motor has a flange size of 58 mm and a rotor length of 2.

AKM22C-ANB2DB-00
The AKM22C-ANB2DB-00 is state-of-the-art motor designed by Kollmorgen. The motor features a very compact design, generates a high-power density and maintains high accuracy during operation. The operation of this sophisticated industrial motor is also characterized by an exceptionally low cogging.

AKM22C-ANB2GB-00
The Kollmorgen AKM22C-ANB2GB-00 is part of the AKM Synchronous Servo Motors series and delivers a continuous stall torque of 0.84 N-m. It features a peak stall torque of 2.73 N-m and a thermal resistance of 1.19 C/watt. Additionally, its rotor inertia is 0.0000161 kg-m^2.

AKM22C-ANB2R-00
The AKM22C-ANB2R-00 is state-of-the-art motor designed by Kollmorgen. The motor features a very compact design, generates a high-power density and maintains high accuracy during operation. The operation of this sophisticated industrial motor is also characterized by an exceptionally low cogging.

AKM22C-ANBNAA-00
The Kollmorgen AKM22C-ANBNAA-00 motor is part of the AKM Synchronous Servo Motors series and has a continuous stall torque of 0.84 Nm. It features a peak stall torque of 2.73 Nm, with a maximum speed of up to 8000 RPM depending on the voltage. The motor has a standard IP54 rating for protection.

AKM22C-ANBNDB-00
The AKM22C-ANBNDB-00 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM22C-ANBNGB-00
The AKM22C-ANBNGB-00 servo motor features a single-phase power supply and a durable rotor with neodymium-iron-boron magnets. Its compact design ensures reliable operation in various applications, making it a versatile choice for precision-driven tasks.

AKM22C-ANBNR-00
The AKM22C-ANBNR-00 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM22C-ANBNR-B0
The AKM22C-ANBNR-B0 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM22C-ANCN1-00
The AKM22C-ANCN1-00 is a servo motor featuring a differential line drive output type. Manufactured by Kollmorgen as part of their AKM Synchronous Servo Motors series, it supports a supply voltage of 5 VDC ±10%. The motor operates within a temperature range of -40 to 100°C.

AKM22C-ANCNR-00
The Kollmorgen AKM22C-ANCNR-00 servo motor features a compact design with a 7.7 mm cable diameter and six-pole configuration. It includes a high-precision resolver for accurate feedback and a robust IEC flange, ensuring reliable performance in dynamic automation settings.

AKM22C-BNBN2-01
The AKM22C-BNBN2-01 servo motor measures 80 x 398 x 200 millimeters, features a power loss of 25 watts, and operates within a frequency range of 50/60 Hz. As part of the AKM Synchronous Servo Motors by Kollmorgen, it has a rated leakage current of 35 milliamps and weighs 6 Kilograms.

AKM22C-BNCNC-01
The AKM22C-BNCNC-01 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM22C-EFBN2-00
The AKM22C-EFBN2-00 synchronous servomotor from Kollmorgen is operated with a SERVOSTAR servo amplifier in a drive system. This motor must be operated only by properly qualified personnel. It is meant to be deployed only for industrial applications.

AKM22C-ENB2EH-00
The AKM22C-ENB2EH-00 motor weighs 3.5 kilograms. This light weight facilitates easier handling during installation and reduces overall system mass.

AKM22C-ENB2EH00
The Kollmorgen AKM22C-ENB2EH00 is part of the AKM Synchronous Servo Motors, featuring a speed of 3000 RPM. It runs on 230 VAC and has a power output of 400 Watts. The motor is flange-mounted, weighing 1.21 kg, and offers IP65 protection with resolver feedback for precise operation.

AKM22C-ENB2R-00
The Kollmorgen AKM22C-ENB2R-00 is part of the AKM Synchronous Servo Motors series and features a 58mm frame dimension with a smooth shaft. It is equipped with a 24V holding brake providing 1.42 Nm of brake holding torque, and uses a resolver feedback system with single-turn inductive feedback. The servo motor has a peak torque of 2.73 Nm and a peak…

AKM22C-ENBN2-00
The AKM22C-ENBN2-00 is a reliable brushless DC servomotor that is designed exclusively for industrial applications. The motor features a smooth shaft and rotatable angular connectors. It does not have a holding brake.

AKM22C-ENDNC-01
The Kollmorgen AKM22C-ENDNC-01 servo motor is built for high-speed applications with a rotor length of 2 and a 58 mm flange. It includes a durable shaft seal and meets vibration class N standards, ensuring smooth and reliable performance in dynamic environments.

AKM22C-ENM2EH-00
The AKM22C-ENM2EH-00 is a Kollmorgen motor belonging to the AKM Synchronous Servo Motors, featuring a hollow output shaft of 20mm. It delivers an output torque of 23.00 Nm with a 60:1 ratio and is designed with a centering foot gearbox. The motor uses a CLP PG 460 lubricant and is not coated.

AKM22C-ESDNC-02
The AKM22C-ESDNC-02 servo motor delivers a continuous stall torque of 0.84 N-m and a peak stall torque of 2.73 N-m. Part of the AKM Synchronous Servo Motors series by Kollmorgen, it weighs 1.1 kilograms and features a back EMF constant of 39 Vrms/kRPM.

AKM22E-ACB2C-01
The AKM22E-ACB2C-01 is a versatile synchronous servomotor in the AKM series with a keyway shaft protected by a shaft seal. The motor sports a smart feedback device.

AKM22E-ACBNR-01
The AKM22E-ACBNR-01 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM22E-ACC2R-00
The AKM22E-ACC2R-00 synchronous servomotor has a keyway shaft. This motor has a rotor length of 2. It incorporates a 0.5 m shielded cable with an IP 65 connector.

AKM22E-ACC2R-0C
The famous Kollmorgen’s AKM Synchronous Servo Motors range, including AKM22E-ACC2R-0C allows efficient power delivery and supports to handle medium-power tasks. A low-inertia rotor boosts dynamic response for rapid acceleration and deceleration, while IP65 sealing and Class F insulation ensure dependable operation in industrial settings.

AKM22E-ANB2AB-00
The AKM22E-ANB2AB-00 synchronous servo motor from Kollmorgen provides 0.87 Nm standstill torque, 2.73 A standstill current, and 10.9 A peak current, ensuring optimized motion control performance.

AKM22E-ANB2R-00
The AKM22E-ANB2R-00 synchronous servomotor wiring can be done only by qualified staff trained in electrical engineering. This motor houses a 24 V holding brake. It has live electrical connections when it is in an energized state.

AKM22E-ANBNR-00
The AKM22E-ANBNR-00 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM22E-ANBR-00
The AKM22E-ANBR-00 is a synchronous servomotor in the AKM series that portrays standard customization. The motor uses a three-phase network to connect. The device comes with a smooth shaft and rotatable angular connectors.

AKM22E-ANC2R-00
The AKM22E-ANC2R-00 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM22E-ANCNR-00
The AKM22E-ANCNR-00 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM22E-ANM2R-00
The AKM22E-ANM2R-00 servo motor provides a continuous current of 40A and a peak current of 73A. Part of the AKM Servo Motor Series from Kollmorgen, it is equipped with an incremental encoder with Hall sensors and offers a maximum mechanical speed of 7500 rpm.

AKM22E-ANS2R-00
The AKM22E-ANS2R-00 is a reliable brushless DC servomotor that comes with special connectors and a resolver feedback device. The motor is equipped with a built-in 24V holding brake.

AKM22E-ANS2R-02
The AKM22E-ANS2R-02 is a brushless synchronous servomotor that features special connectors and a smooth shaft. The motor has a 24V holding brake and is equipped with a Resolver feedback device.

AKM22E-ANSNR-02
The AKM22E-ANSNR-02 standard servo motor features a rated power of 0.30 kW. As part of Kollmorgen’s AKM Synchronous Servo Motors, it is equipped with an angular rotatable connector and protection class IP65. The motor delivers a maximum torque of 1.46 Nm.

AKM22E-BNBNC-00
The AKM22E-BNBNC-00 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM22E-BNBNR-00
The AKM22E-BNBNR-00 from Kollmorgen’s AKM Synchronous Servo Motors series delivers a rated power of 0.59 kW at 230VAC. It features a standstill torque of 0.87 Nm and a rotor moment of inertia of 0.16 kgcm². With a weight of approximately 1.1 kg, it supports an axial load of 60 N.

AKM22E-BNC2R-00
The AKM22E-BNC2R-00 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM22E-BNM22-01
The AKM22E-BNM22-01 is a reliable synchronous servomotor in the AKM series featuring a smooth shaft with shaft seal customization. The motor is equipped with a comcoder with 2048 PPR as its feedback device.

AKM22E-BNM2EM-00
The AKM22E-BNM2EM-00 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM22E-BNMN1-00
The AKM22E-BNMN1-00 is a synchronous brushless DC servomotor in the AKM series that is meant for use in industrial environments. The motor relies on a comcoder with 1024 PPR for feedback. It features a smooth shaft and does not have a shaft seal.

AKM22E-BNMN2-00
The AKM22E-BNMN2-00 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM22E-BNMNC-00
The AKM22E-BNMNC-00 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM22E-CKBNAA00
The AKM22E-CKBNAA00 servomotor by Kollmorgen, equipped with a shaft open keyway, Feedback Acuro(Biss) Single Turn, and angular connectors rotatable, sets new standards for industrial automation excellence.

AKM22E-CKMN2-00
The AKM22E-CKMN2-00 is a synchronous servomotor that comes with an open keyway shaft. The motor incorporates a Comcoder with a 2048 PPR as its feedback unit. The device has a rotor length of 2 and an E winding type.

AKM22E-CKMNC-00
The AKM22E-CKMNC-00 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM22E-CKS22-03
The AKM22E-CKS22-03 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM22E-CSPNC-02
The AKM22E-CSPNC-02 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM22E-EFCNR-00
The AKM22E-EFCNR-00 is a 60mm synchronous servo motor with a rated speed of 4000 rpm. Manufactured by Kollmorgen as part of the AKM Synchronous Servo Motors series, it offers a rated power of 0.46 kW. The device features an IP65 protection class and a multi-turn absolute encoder.

AKM22E-ENBNR-01
The AKM22E-ENBNR-01 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM22E-ENCNR-00
The Kollmorgen AKM22E-ENCNR-00 synchronous servo motor offers a rated power of 0.22 kW and a peak current of 10.9 A. Key specifications include a torque constant of 0.32 Nm/A, a voltage constant of 20.4 mVmin, and a winding resistance of 5.22 Ω. This motor is suitable for a variety of industrial automation tasks.

AKM22E-ESCNR-02
The AKM22E-ESCNR-02 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM22E-VBBNR-00
The AKM22E-VBBNR-00 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM22G-ACBNEF-00
The AKM22G-ACBNEF-00 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM22G-ACDNCA-00
The AKM22G-ACDNCA-00 is a synchronous servo motor with a peak stall torque of 2.79 N-m. Manufactured by Kollmorgen as part of their AKM Synchronous Servo Motors series, it delivers rated power of 539 Watts at 120 VAC. The motor boasts a rotor inertia of 0.0000161 kg-m².

AKM22G-ACSN2-03
The AKM22G-ACSN2-03 is a servo motor with a power output of 15 kW. Manufactured by Kollmorgen as part of the AKM Synchronous Servo Motors, the motor operates at a voltage of 400 V. It has a frequency of 50 Hz and is designed to operate on a three-phase system with an efficiency of 89%.

AKM22G-ANPNC-00
The AKM22G-ANPNC-00 servo motor from Kollmorgen’s AKM series is a compact yet powerful solution for industrial automation. It’s engineered for 120/240V operation at 60Hz and has a power factor of 0.8. The motor’s robust design includes an operating temperature range of -20°C to 65°C, making it suitable for various industrial settings.

AKM22G-BNCN2-00
The AKM22G-BNCN2-00 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM22G-BSC22-02
The AKM22G-BSC22-02 is a Kollmorgen motor from the AKM Synchronous Servo Motors series, featuring an optical incremental encoder. It supports a supply voltage of 5 VDC ±10% and offers a dual-channel quadrature output format. The motor operates within a temperature range of -40 to 100°C.

AKM22G-CKB22-00
The AKM22G-CKB22-00 is a DC synchronous servomotor in the AKM series that offers best-in-class performance and industry-leading power density. The motor incorporates a Comcoder with 2048 PPR feedback device and comes with a 24V holding brake.

AKM22G-CKMNEF00
The Kollmorgen AKM22G-CKMNEF00 servomotor, with IP20 connectors and a safety-focused design, offers reliable performance and precise control, ensuring optimal operation and user safety in industrial applications.

AKM22G-EFB2C-01
The AKM22G-EFB2C-01 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM22G-EFBN2-00
The AKM22G-EFBN2-00 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM22G-ENBN2-00
The AKM22G-ENBN2-00 Is manufactured by Kollmorgen and features a max BUS of 640 and max Tp of 4.82 Nm. The AKM series also featured a max rated force of 8000 and max rated power of .54 kW.

AKM22G-ENCN2-00
Kollmorgen’s AKM22G-ENCN2-00 servomotor delivers exceptional performance with a static friction torque of 0.005Nm, consuming just 8.4W of electrical power at an operating voltage of 24 VDC to 115 VAC.

AKM22G-ENM2C-00
The AKM22G-ENM2C-00 is a synchronous servomotor from Kollmorgen that features a smooth shaft and a Smart feedback device. The motor has a built-in holding brake, and its rotor length is 2.

AKM22G-ENMN2-00
The Kollmorgen AKM22G-ENMN2-00, part of the AKM Synchronous Servo Motors, operates at a frequency of 50/60 Hz. This motor’s power loss is 25 Watts and it has a rated leakage current of 35 mA. It also has an EMC level of Class A and weighs 6 kilograms.

AKM22G-ENMNEM-00
The AKM22G-ENMNEM-00 synchronous servo motor is a versatile solution for a wide range of industrial automation needs. Operating at 220V and 10A, this 6-pole motor delivers a rated power of 2.2 kW. Its thermal time constant of 9 minutes and static friction torque of 0.005 Nm contribute to stable and efficient operation. The motor’s compact size and …

AKM22H-ANBN2-01
The AKM22H-ANBN2-01 servo motor delivers a holding torque of 0.59 Nm and operates with a rated current of 2.2 A. As part of the AKM Synchronous Servo Motors series manufactured by Kollmorgen, it features a NEMA 23 frame size and achieves a maximum speed of 6000 RPM.

AKM22H-ANBNAD-01
The AKM22H-ANBNAD-01 is a synchronous servo motor manufactured by Kollmorgen. Part of the AKM Synchronous Servo Motors series, it features encoder mounting options except for 3-stack models. The motor’s encoder supply voltage is 5 VDC ± 10%. It has an axial force load of 400 lbs.

AKM22H-ANM2AD-00
The AKM22H-ANM2AD-00 is a highly versatile servo motor with a differential line drive output type. Manufactured by Kollmorgen and part of their AKM Synchronous Servo Motors series, it features an optical incremental encoder and operates within a temperature range of -40°C to 100°C.

AKM22H-ANMNAD-00
The AKM22H-ANMNAD-00 is a servo motor manufactured by Kollmorgen. It is part of the AKM Synchronous Servo Motors series and offers a continuous stall torque of 1.23 Nm. The motor achieves a peak stall torque of 4.06 Nm. It features a maximum speed of 8000 RPM at 120 VAC.

AKM22H-CKS2AD-02
The AKM22H-CKS2AD-02 is part of Kollmorgen’s AKM Synchronous Servo Motors, delivering a rated power of 567 Watts. It features a continuous stall torque of 0.84 N-m and a maximum speed of 8000 RPM. With a thermal resistance of 1.19°C/Watt, it operates efficiently in ambient temperatures up to 40°C.