PART NUMBER | MPN DESCRIPTION STOCK LEVEL
MCS-2015
The Danaher MCS-2015 servo drive is designed for use with remote control stations and programmable controllers. It supports an input voltage of 115/230 VAC and delivers a 24 VDC output. The drive is equipped with thermal overload protection for enhanced safety.

MCS-2042
The MCS-2042 servo drive by Danaher operates on 230 VAC, features an integrated prewired motor run capacitor, and is compatible with load capacities of 500, 1000, and 1500 lbs. Part of the MC Servostar Servo Drives series, it ensures safe motor operation and brake engagement.

MCS2000-DRV2
The MCS2000-DRV2 servo drive offers a maximum output current of 4.5 amps DC per channel with an overload capacity of 6 amps for 30 seconds. Part of the MC Servostar Servo Drives series by Kollmorgen, it supports input voltages of 24 or 48 VDC and includes polarity and short-circuit protection.

MCS2000-ECA
The MCS2000-ECA servo drive offers 2 analog input channels ranging from 0–10 VDC and a resolution of 12-bit ADC/DAC with 4096 steps. Part of the MC Servostar Servo Drives series by Danaher, it features programming via RS232 cable and a memory card that stores up to 2 full programs.

MCS2000-PRG
The Danaher MCS2000-PRG is a handheld programmer from the MC Servostar Servo Drives series, featuring a 2 x 16 character backlit display. It supports menu-driven programming and only requires four push buttons for operation. Its quick-disconnect cable connects to a 4-position jack.

MCSE05-3224-001
The Kollmorgen MCSE05-3224-001 servo drive, part of the MC Servostar Servo Drives series, features an enclosure rated at NEMA 1 (IP 20). It operates with an input voltage of 24 or 48 VDC and provides short circuit protection. The unit measures 6.85 x 2.95 x 7.28 inches.

MCSE16-0808-000
The MCSE16-0808-000 controller module operates on a power supply of 100-240 VAC, has a power consumption of 14.5 watts, and features two CAN interfaces. Part of the MC Servostar Servo Drives by Kollmorgen, it is electrically isolated and designed for screw-in module mounting.

MCSE16-3208-001
Kollmorgen’s MC Servostar Servo Drives series represents the pinnacle of servo drive technology, offering a comprehensive range of high-performance drives designed to meet the exacting requirements of modern motion control applications. These drives are crafted to provide a unique blend of high precision, low noise, and advanced control capabilitie…

MCSS-16-6410-004
The MCSS-16-6410-004 electric motor drive offers a rated torque of 45 Nm, a supply voltage range of 380-480 VAC, and operates with noise levels less than 70 dB. Part of the MC Servostar Servo Drives from Kollmorgen, it features IP54 protection and can be mounted on a wall.

MCSS-32-6432-002
The MCSS-32-6432-002 is a stainless steel servo drive component with a 32mm diameter and 6432mm length. Manufactured by Kollmorgen, it is part of the MC Servostar Servo Drives series and exhibits a surface finish of Ra ≤ 0.8 μm. It has a hardness of HRC 58-62.

MCSS03-51210-004
The MCSS03-51210-004 is a controller module featuring electrical isolation. Kollmorgen’s development in the MC Servostar Servo Drives, it has a power consumption of 14.5 W. It supports network capability and includes two CAN interfaces.

MCSS04-3232-001
The MCSS04-3232-001 drive operates at 400V AC input voltage. Part of Kollmorgen’s MC Servostar Servo Drives, it boasts an IP65 protection class. The device weighs 4.0 kg, measures 210x300x150 mm, and is equipped with an RS485 interface.

MCSS08-3224-001
The MCSS08-3224-001 servo drive offers a current of 80 A, a frequency range of 50/60 Hz, and weighs 6 kg. Part of the MC Servostar Servo Drives and manufactured by Kollmorgen, it boasts a compact dimension of 80 x 398 x 200 mm and an Emc Level of Class A.

MCSS08-3232-001
The Kollmorgen MCSS08-3232-001 is part of the MC Servo star Servo Drives series and features a robust double clamp type. This servo drive is made from hardened steel with a shank size of 32 mm x 32 mm. Its surface is ground for precision and it is compatible with insert size 08.

MCSS23-6432-002
The MCSS23-6432-002 from Kollmorgen is part of the MC Servostar multi-axis controller series, featuring digital control and NVRAM. It offers an Ethernet input with a transmission speed of 10 Mbps. The controller comes with two SERCOS fiber optic connectors and functions within temperatures ranging from -20°C to +50°C.

SE10200-000000
The SE10200-000000 servo drive from Kollmorgen’s MC Servostar series provides precise digital control for industrial automation. Key features include a compact design with dimensions of 125 mm x 210 mm x 130 mm and a light weight of 1.3 kg. This drive complies with EN 60950 and EN 61800-5-1 safety standards and EN 61800-3 and EN 61000-6-2 EMC stand…

SERVOSTAR MC
The ROD interface on the SERVOSTAR MC facilitates effective incremental positioning, while a resolver digital conversion enhances system reliability by converting analog resolver signals into digital format. An overload contactor with phase monitoring provides additional system protection, and ferrite ring cores help suppress electrical noise.