PER-SERVOSTAR 403A-C
The PER-SERVOSTAR 403A-C servo drive boasts a peak output current of 9 Arms, lasting up to 5 seconds. Manufactured by Kollmorgen, it is part of the S400 Servo Drives series and operates within rated supply voltages of 1 x 115V to 3 x 400V. This servo drive weighs 3 kg.

S4036M-CA
The S4036M-CA is manufactured by Kollmorgen as part of their S400 Servo Drive Series. The S4036M-CA is a Master module with a Rated DC Link Voltage of 160-310 V. It also features a Rated Output Current of 3A rms and a Peak Output Current of 9A rms.

S4036M-SE
The S4036M-SE is manufactured by Kollmorgen as part of their S400 Servo Drive Series. The S4036M-SE is a Master module with a Rated DC Link Voltage of 160-310 V. It also features a Rated Output Current of 3A rms and a Peak Output Current of 9A rms.

S403A-CA
The S403A-CA is manufactured by Kollmorgen as part of their S400 Servo Drive Series. The S403A-CA is a Axis module with a Rated DC Link Voltage of 310-560 V. It also features a Rated Output Current of 3A rms and a Peak Output Current of 9A rms.

S403A-SE
The S403A-SE is manufactured by Kollmorgen as part of their S400 Servo Drive Series. The S403A-SE is a Axis module with a Rated DC Link Voltage of 310-560 V. It also features a Rated Output Current of 3A rms and a Peak Output Current of 9A rms.

S403AM-CA
The S403AM-CA is manufactured by Kollmorgen as part of their S400 Servo Drive Series. The S403AM-CA is a Master module with a Rated DC Link Voltage of 310-560 V. It also features a Rated Output Current of 3A rms and a Peak Output Current of 9A rms.

S403AM-PB
The S403AM-PB is a toggle switch with a standard bat actuator and a panel mount design. Manufactured by Kollmorgen as part of the S400 Servo Drives series, it features a current rating of 6A @ 125VAC and 3A @ 250VAC. The switch has a brass nickel-plated body.

S403AM-SE
The S403AM-SE is manufactured by Kollmorgen as part of their S400 Servo Drive Series. The S403AM-SE is a Master module with a Rated DC Link Voltage of 310-560 V. It also features a Rated Output Current of 3A rms and a Peak Output Current of 9A rms.

S403BA-CA
The S403BA-CA is manufactured by Kollmorgen as part of their S400 Servo Drive Series. The S403BA-CA is a Axis module with a Rated DC Link Voltage of 160-310 V. It also features a Rated Output Current of 3A rms and a Peak Output Current of 9A rms.

S403BA-CA-022
The Kollmorgen S403BA-CA-022 is part of the S400 Servo Drives and has dimensions of 80 x 398 x 200 mm. The servo drive features a current rating of 80 Amps and a power loss of 25 Watts. It also operates at frequencies of 50/60 Hz and is classified under EMC level Class A.

S403BA-PB
The S403BA-PB is a 3-pole circuit breaker with a current rating of 3A. Manufactured by Kollmorgen as a part of their S400 Servo Drives series, it operates within a voltage rating of 480/277 V AC. It features thermal-magnetic trip type, toggle actuator, and DIN rail mounting.

S403BA-SE
The S403BA-SE is manufactured by Kollmorgen as part of their S400 Servo Drive Series. The S403BA-SE is a Axis module with a Rated DC Link Voltage of 160-310 V. It also features a Rated Output Current of 3A rms and a Peak Output Current of 9A rms.

S403M-PB
The S403M-PB is manufactured by Kollmorgen as part of their S400 Servo Drive Series. The S403M-PB is a Master module with a Rated DC Link Voltage of 160-310 V. It also features a Rated Output Current of 3A rms and a Peak Output Current of 9A rms.

S403M-SE
The S403M-SE is manufactured by Kollmorgen as part of their S400 Servo Drive Series. The S403M-SE is a Master module with a Rated DC Link Voltage of 160-310 V. It also features a Rated Output Current of 3A rms and a Peak Output Current of 9A rms.

S406A-CA
The S406A-CA is manufactured by Kollmorgen as part of their S400 Servo Drive Series. The S406A-CA is a Axis module with a Rated DC Link Voltage of 310-560 V. It also features a Rated Output Current of 6A rms and a Peak Output Current of 12A rms.

S406AM-CA
The S406AM-CA is manufactured by Kollmorgen as part of their S400 Servo Drive Series. The S406AM-CA is a Master module with a Rated DC Link Voltage of 310-560 V. It also features a Rated Output Current of 6A rms and a Peak Output Current of 12A rms.

S406AM-CA-022
The Kollmorgen S406AM-CA-022 drive is a robust master module designed for multi-axis systems. It supports a rated DC bus link voltage of 160-320 V and operates with a residual voltage drop of less than 5 V. Its efficient design ensures reliable performance in demanding automation tasks.

S406AM-PB
The S406AM-PB is manufactured by Kollmorgen as part of their S400 Servo Drive Series. The S406AM-PB is a Master module with a Rated DC Link Voltage of 310-560 V. It also features a Rated Output Current of 6A rms and a Peak Output Current of 12A rms.

S406BA-CA
The S406BA-CA is manufactured by Kollmorgen as part of their S400 Servo Drive Series. The S406BA-CA is a Axis module with a Rated DC Link Voltage of 160-310 V. It also features a Rated Output Current of 6A rms and a Peak Output Current of 12A rms.

S406BA-PB
The Kollmorgen S406BA-PB is part of the S400 Servo Drives series and features a rated current of 6 Amps. This miniature circuit breaker operates at 50/60 Hz frequency and supports a voltage of 277/480 V AC. It is designed for DIN rail mounting with screw terminal connections.

S406BA-SE
The S406BA-SE is manufactured by Kollmorgen as part of their S400 Servo Drive Series. The S406BA-SE is a Axis module with a Rated DC Link Voltage of 160-310 V. It also features a Rated Output Current of 6A rms and a Peak Output Current of 12A rms.

S443M-CA
The S443M-CA is manufactured by Kollmorgen as part of their S400 Servo Drive Series. The S443M-CA is a Master module with a Rated DC Link Voltage of 310-560 V. It also features a Rated Output Current of 3A rms and a Peak Output Current of 9A rms.

S443M-PB
The S443M-PB is manufactured by Kollmorgen as part of their S400 Servo Drive Series. The S443M-PB is a Master module with a Rated DC Link Voltage of 310-560 V. It also features a Rated Output Current of 3A rms and a Peak Output Current of 9A rms.

S443M-SE
The S443M-SE is manufactured by Kollmorgen as part of their S400 Servo Drive Series. The S443M-SE is a Master module with a Rated DC Link Voltage of 310-560 V. It also features a Rated Output Current of 3A rms and a Peak Output Current of 9A rms.

S446M-CA
The S446M-CA is manufactured by Kollmorgen as part of their S400 Servo Drive Series. The S446M-CA is a Master module with a Rated DC Link Voltage of 310-560 V. It also features a Rated Output Current of 6A rms and a Peak Output Current of 12A rms.

SERVOSTAR-400-A
The SERVOSTAR-400-A is designed for use in controlled electrical environments and should not be connected directly to ungrounded or asymmetrically grounded power supplies exceeding 230 V without an isolating transformer. It can handle phase-to-shield overvoltages up to 1000 V and phase-to-phase spiking voltages not exceeding 1000 V, complying with …

SERVOSTAR-400-M
The SERVOSTAR-400-M features effective thermal management, with thermal dissipation rated at 60 W (including PSU losses) and 12 W for deactivated output stages. The device supports high current usage and maintains a residual voltage drop of no more than 5 V at rated current, with a subordinate current controller bandwidth greater than 1.2 kHz for s…

SERVOSTAR-403A-C
The SERVOSTAR-403A-C also supports multi-feedback and multi-interface options, making it adaptable to various systems and configurations. An SI-unit calculator simplifies user interaction by allowing easy input of position, speed, or acceleration in SI units.

SERVOSTAR-403A-CA
Auto-tuning support enables quick and precise setup, while the SI-unit calculator allows users to easily navigate coordinate systems for speed, position, and acceleration. There is less need for external components during installation since the brake resistor and power supply are integrated.

SERVOSTAR-403A-P | S403A-PB
The SERVOSTAR 403A-P complies with the EC EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC), adhering to EN 61800-3 for EMC tailored to industrial needs. It is categorized as C2 for noise emission, ensuring minimal electromagnetic interference within a 10-meter motor cable range, promoting operation in an electromagnetically clea…

SERVOSTAR-403A-S
Although designed for industrial use, it generates high-frequency vibrations and interferences in non-industrial settings, with version C3 recommended for machinery cables over 10 meters from the motor to mitigate electromagnetic interference. Compliance with the Low Voltage Directive and EN 50178 standards ensures safety and reliability.

SERVOSTAR-403M-C
It is designed for vertical installation on DIN rails, ensuring adequate ventilation with at least 50 mm of open space above and below. The amplifier complies with UL standards for the United States (UL file number E217428) and cUL standards for Canada, including UL 840 and 508C, which are critical for electrically propelled power conversion equipm…

SERVOSTAR-403M-CA
The SERVOSTAR-403M-CA servo amplifier also features space for an expansion card and a flexible CANopen communication interface with an operating frequency of 500 kBaud. The amplifier includes an output IGBT module with floating current monitoring and operates with DC bus link voltages ranging from 135 V to 900 V, ensuring reliable performance acros…

SERVOSTAR-406
Optional accessories, including synchronous servomotors and communication cables, can be purchased separately, making the SERVOSTAR-406 a highly adaptable solution for automation systems.

SERVOSTAR-406A-C
Measuring 70 mm in width, it easily integrates into compact designs and supports dual voltage classes (1x110V to 3x480V), making it versatile for different industrial setups. The SERVOSTAR-406A-C amplifier supports long cable lengths up to 25 meters and various encoder types, including SinCos and ENDAT protocols.

SERVOSTAR-406A-P
The SERVOSTAR-406A-P supports DC voltage bus links of 135 to 450 V DC or 260 to 900 V DC, optimizing power management and noise control for effective feedback systems in motion applications.

SERVOSTAR-406A-S
Programming is facilitated through an RS232 interface and user-friendly setup software, compatible with various Windows operating systems. With a differential input capability of up to ~10 V and 12-bit resolution, it allows for quick torque target adjustments.

SERVOSTAR-406M-P
With a digital current controller using space vector pulse-width modulation and an embedded position controller, it ensures efficient performance in time-sensitive applications, with response times as low as 10 ms. It includes 24V PLC-compatible control inputs and signaling outputs, complying with IEC 61131, for easy interfacing with industrial con…

SERVOSTAR-406M-S
The SERVOSTAR-406M-S supports various expansion cards for communication protocols such as PROFIBUS DP, SERCOS, and EtherCAT, allowing for seamless integration into diverse industrial networks. A separate 2CAN expansion module is also available for enhanced system flexibility.

SERVOSTAR-443M-C | S443M-CA
With control pulse inputs rated up to 30V DC and a digital output configuration, the SERVOSTAR-443M-C ensures effective motor control. An onboard electronic brake resistor captures excess energy during braking, while the unit operates reliably in humid environments up to 85% RH.

SERVOSTAR-443M-P | S403AM-PB
The regenerative circuit effectively dissipates energy during motor stoppage, with adjustable thresholds and a warning system to prevent power overloads. It requires a Pentium II or equivalent processor and runs on Windows 2000/XP, utilizing a free serial interface and supporting up to 64 nodes in CAN communication.

SERVOSTAR-443M-S
In the event of an overvoltage fault, the SERVOSTAR-443M-S amplifier with the lowest threshold will safely switch off, ensuring reliable operation. The amplifier can control multiple servo amplifiers connected via a common DC bus, enhancing system efficiency with its regenerative circuit.

SERVOSTAR-446M-C
Measuring just 70 mm wide, the SERVOSTAR-446M-C is easy to install in tight spaces and includes two analog inputs along with an internal RS232 port for communication. The amplifier also features a restart lock (AS) to prevent unintentional restarts and an Emergency Stop function that deactivates the controller and cuts power supply to ensure safe o…

SERVOSTAR-446M-P
Maximum voltage ranges at the amplifiers CAN_H and CAN_L terminals are limited to -25 to +18 volts for protection under varying electrical conditions. Grounding for the DeviceNet network is required at a single point to prevent ground loops, while all device circuitry is grounded to the V-bus.

SERVOSTAR-446M-S
The SERVOSTAR-446M-S amplifier supports internal counting pulses, allowing for precise control, and smooths power voltage through a DC bus link. It is compatible with various fieldbus interfaces, including CANopen, PROFIBUS, and SERCOS, enabling integration with diverse control systems.