0190-A2460
The 0190-A2460, part of the Kollmorgen S600 series, is a 230V, 3-phase servo drive designed for industrial use. This frequency inverter drive is rated for 2 HP and features a rated output current of 6A and a peak current of 12A. It offers precise motor control through its adjustable parameters, including the output stage clock frequency.

0190-a2461
The 0190-a2461 stainless steel fastener features an M12 thread size and a 1.75 mm thread pitch. Manufactured by Kollmorgen in their ServoStar S600 series, it meets DIN 933 standards and weighs 0.116 kg. It operates within a temperature range of -50°C to +300°C.

0190-A2463
The Kollmorgen 0190-A2463, part of the S600 Servo Drives series, comes with an operating temperature range of -40°C to +125°C. It features a switch current of 700 uA and can support a supply voltage range of 3 V to 16 V. The device uses SMD/SMT mounting style.

ATS-SERVOSTAR 603-AS-BV
The ATS-SERVOSTAR 603-AS-BV is a controller module with a power consumption of 14.5 W. Kollmorgen’s module belongs to the S600 Servo Drives and accommodates a power supply range of 100-240 VAC. It features two CAN interfaces for efficient communication.

ATS-SERVOSTAR 603-AS-PROFI
The Kollmorgen ATS-SERVOSTAR 603-AS-PROFI is part of the S600 Servo Drives series, featuring a power output of 2 kVA. It operates at a frequency of 50/60 Hz and requires a power supply of 230-480V. Its operating temperature ranges from -10 to 40 °C and it weighs 3 kilograms.

L+M-SERVOSTAR 606-AS-FAN
The L+M-SERVOSTAR 606-AS-FAN servo drive features a continuous rated output current of 6 amps and a peak output current of 18 amps. Part of the S600 Servo Drives from Kollmorgen, it offers CANopen and RS232/RS485 communication interfaces along with IP20 class protection.

PRD-00630000-02
Kollmorgen PRD-00630000-02 drive operates on a 220-240V AC power supply, delivering a maximum load capacity of 5 kW. It offers seamless integration with EtherCAT and CANopen communication protocols for enhanced connectivity. it features an intuitive software interface for easy setup.

PRD-00630000-03
The Kollmorgen PRD-00630000-03 is part of the renowned S600 Servo Drives series, with a weight of 6 kg. This drive operates at a frequency of 50/60 Hz and features a power loss of 25 W with a maximum temperature limit of 45°C. It boasts a current capacity of 80 A.

PRD-0063000A-00
The PRD-0063000A-00 is a compact servo actuator made from durable aluminum alloy. Manufactured by Kollmorgen as part of the ServoStar S600 series, it operates at a rated voltage of 24 VDC. This actuator delivers a maximum force output of 500 N with an IP54 ingress protection rating.

PRD-0063000z-00
The PRD-0063000z-00 module comes with electrically isolated interfaces, requires 100-240 VAC power supply, and boasts network capability. Part of the S600 Servo Drives Series by Kollmorgen, it consumes 14.5 watts of power and features screw-in module mounting for ease of installation.

PRD-0063100z-00
The Kollmorgen S600 Series represents the next generation of servo drives, combining cutting-edge technology with user-friendly design. These drives are engineered for precision motion control, offering high-speed communication, flexible configuration options, and compatibility with a wide range of motors. Perfect for demanding applications in robo…

S600300-550
The S600300-550 is a steel servo drive component with a hexagonal drive type and a length of 55 mm. Manufactured by Kollmorgen as part of their S600 Servo Drives series, it features a metric thread type with a 1 mm pitch. The component boasts a tensile strength of 800 MPa.

S60100
The S60100 is a compact servo drive weighing 4 kg. Made by Kollmorgen, it’s part of the S600 Servo Drives series and supports a voltage range of 3x230V-10% to 480V+10%. This drive’s output stage clocks at 8 kHz and operates efficiently with a rated current of 1.5 A (RMS value, ±3%).

S60100-EI
The S60100-EI was manufactured by Kollmorgen as part of their S600 Servo Drive Series. This drive features a rated output current of 1.5 arms and a peak output current 3 arms. It also withholds a voltage rating of 230-480 V and a Max. continuous performance of 0.5 kW.

S60100-EL
The S60100-EL servo drive is a product of Kollmorgen. It belongs to the S600 Servo Drives series and features a rated output current of 1.5 A rms. With enclosure protection rated at IP20, the drive supports a DC bus link voltage range of 260V to 675V. It includes integrated CANopen communication interfaces.

S60100-NA
The Kollmorgen S60100-NA, part of the S600 Servo Drives series, has a rated supply voltage of 3 x 230V at 50Hz or 3 x 208V at 60Hz. It features a rated output current of 1.5 Arms with a peak output current of 3 Arms. This drive weighs approximately 4 kg.

S60100-PB
The S60100-PB servo drive features a rated output current of 1.5 A and IP20 enclosure protection. Part of the S600 Servo Drives by Kollmorgen, it includes PROFIBUS DP fieldbus integration and operates within a voltage range of 290 V to 675 V DC.

S60100-SE
The S60100-SE is a controller module with electrically isolated components. Manufactured by Kollmorgen as part of the S600 Servo Drives Series, it features two CAN interfaces for networking. It can operate within an input voltage range of 100-240 VAC and consumes 14.5 watts of power.

S60101
The S60101 is a steel hex fastener with a zinc-plated finish and 25 mm length. Manufactured by Kollmorgen under the S600 Servo Drives series, it meets DIN 933 standards and supports corrosion resistance. This fastener features an M6 thread size and a tensile strength of 800 N/mm².

S60300
S60300 is a servo amplifier. The heat dissipation is 40 Watts. Continuous output of the drive is 3 Amps.

S60300-550
Kollmorgen’s S60300-550, a servo drive in the S600 Servo Drives series, is engineered for superior performance. It supports an input voltage range of 230-480V, providing flexibility across different industrial setups. Designed for efficiency, it optimizes motor control.

S60300-590
The S60300-590 servo drive features an aluminum alloy panel with an anodized finish and quick-disconnect terminals. Part of the S600 Servo Drives from Kollmorgen, it is moisture and vibration resistant and supports an operating temperature range of -40°C to +70°C.

S60300-EI
The S60300-EI servo drive has a rated output current of 3 A and operates at a voltage range of 3x230V – 480V at 50Hz or 3x208V – 480V at 60Hz. Manufactured by Kollmorgen as part of the S600 Servo Drives series, it features an IP20 enclosure protection rating and supports CANopen and RS232 communication interfaces.

S60300-NA
The Kollmorgen S60300-NA servo drive is part of the S600 Servo Drives series and features a rated output current of 3 Amps. It supports digital communication with integrated CANopen and RS232 interfaces. The drive’s auxiliary power supply is 24 VDC with up to 1 Amp capacity.

S60300-NA-115
The S60300-NA-115 is a digital servo amplifier engineered to control speed, position and current of verious motors used in machining and manufacturing applications.

S60300-PB
The S60300-PB was manufactured by Kollmorgen as part of their S600 Servo Drive Series. This drive features a rated output current of 3 arms and a peak output current 6 arms. It also withholds a voltage rating of 230-480 V and a Max. continuous performance of 0.5 kW.

S60300-SE
The S60300-SE is a sealed limit switch manufactured by Kollmorgen. It is part of the S600 Servo Drives and features an actuator type of rotary. The switch is rated for 240V AC and 10A current. Its housing is made of die-cast aluminum, ensuring durability under tough conditions.

S60301
The S60301 is a stainless steel sensor with a measuring range of 0–100 kPa. Designed by Kollmorgen and part of the S600 Servo Drives series, it operates within a temperature range of -20°C to +80°C. The sensor has an IP65 protection class and a response time of less than 10 milliseconds.

S60301-550
The S60301-550 servo drive operates with a power of 2kVA, utilizes a three-phase input voltage of 230/480V, and includes ProfiBus module integration. Part of the S600 Servo Drives by Kollmorgen, it boasts a protection rating of IP20 and a nominal current of 3 amps.

S60301-560
The S60301-560 was manufactured by Kollmorgen as part of their S600 Servo Drive Series. This drive features a rated output current of 3 arms and a peak output current 6 arms. It also withholds a voltage rating of 230-480 V and a Max. continuous performance of 0.5 kW.

S60301-NA
The S60301-NA servo drive offers a rated output current of 3A and peak output current of 6A. From the S600 Servo Drives series by Kollmorgen, it features IP20 enclosure protection and operates with rated supply voltages up to 3 x 480V (±10%).

S60301-PB
The S60301-PB is a red push-button switch with a round shape and panel mount configuration. Manufactured by Kollmorgen and part of the S600 Servo Drives series, it features a solder lug terminal type and operates at 250V AC. The switch has an IP40 ingress protection.

S60301-SE
The S60301-SE servo drive offers a rated output current of 3 Amps and a peak output current of 6 Amps. Belonging to the S600 Servo Drives series by Kollmorgen, it features IP20 protection and a rated supply voltage of 3×230V-480V or 3×208V-480V depending on frequency.

S60600
The S60600 was manufactured by Kollmorgen as part of their S600 Servo Drive Series. This drive features a rated output current of 6 arms and a peak output current 12 arms. It also withholds a voltage rating of 230-480 V and a Max. continuous performance of 1.5 kW.

S60600-550
The Kollmorgen S60600-550 belongs to the S600 Servo Drives series and is made of stainless steel with a passivated finish. It features a hex socket drive type with a head diameter of 10 mm. The tensile strength is 700 MPa, and it offers high corrosion resistance while weighing approximately 12 grams.

S60600-NA
The Kollmorgen S60600-NA, part of the S600 Servo Drives series, operates with a rated supply voltage of 3 x 230V at 50Hz or 3 x 208V at 60Hz. It boasts a peak output current of 12A and a clock frequency of 8 kHz. The drive weighs approximately 7.5 kg.

S60600-PB
The S60600-PB was manufactured by Kollmorgen as part of their S600 Servo Drive Series. This drive features a rated output current of 6 arms and a peak output current 12 arms. It also withholds a voltage rating of 230-480 V and a Max. continuous performance of 1.5 kW.

S60600-SE
The S60600-SE was manufactured by Kollmorgen as part of their S600 Servo Drive Series. This drive features a rated output current of 6 arms and a peak output current 12 arms. It also withholds a voltage rating of 230-480 V and a Max. continuous performance of 1.5 kW.

S60601
The Kollmorgen S60601 is part of the S600 Servo Drives series, designed with a single pole configuration and rated for 6 Amps of current. It features a C tripping characteristic, IP20 protection, and operates on a 230V AC supply. The unit supports DIN rail mounting.

S60601-PB
The S60601-PB toggle switch features a bat actuator type, a panel mount design, and a contact rating of 6A at 125VAC or 3A at 250VAC. Part of the S600 Servo Drives series by Kollmorgen, it operates within a temperature range of -20°C to +85°C.

S60601-SE
The S60601-SE solenoid valve has a 6 mm orifice size, a pressure range of 0 to 10 bar, and a flow rate of 0.7 m³/h. Part of the S600 Servo Drives series by Kollmorgen, it features IP65 protection, operates at 24V DC, and has a compact stainless steel body weighing 0.45 kg.

S610
The S610 is a pressure transmitter designed with a measuring range of up to 10 bar depending on configuration. Manufactured by Kollmorgen as part of the S600 Servo Drives series, it operates with a supply voltage of 10 to 30 VDC. The transmitter is IP65 rated with stainless steel 316L wetted parts.

S610-3000-NA
The S610-3000-NA was manufactured by Kollmorgen as part of their S600 Servo Drive Series. This drive features a rated output current of 10 arms and a peak output current 20 arms. It also withholds a voltage rating of 230-480 V and a Max. continuous performance of 1.5 kW.

S6100-NA
The S6100-NA servo drive features a rated output current of 10 A and peak output current of 20 A. Manufactured by Kollmorgen as part of the S600 Servo Drives series, it operates at a clock frequency of 8 kHz. It includes integrated CANopen and RS232 communication interfaces.

S61000
The S61000 is a 4 kg device designed for high-performance operation. Manufactured by Kollmorgen as part of the S600 Servo Drives series, it features a voltage rating of 230-480 V. With a peak output current of 20 Arms, it emits only 45 dB of noise.

S61000-550
The S61000-550 servo drive offers a rated output current of 10A and a peak output current of 20A, operating with a rated DC bus link voltage range of 260–675 VDC. As part of the S600 Servo Drives by Kollmorgen, it includes an ambient operating temperature range of 0 to +45°C.

S61000-600
The S61000-600 connector offers a current rating of 13 amps and is constructed with a durable aluminum alloy body. Part of the S600 Servo Drives series by Kollmorgen, it features a panel mount design, IP67 ingress protection, and operates effectively within a temperature range of -55°C to +125°C.

S61000-NA
The S61000-NA was manufactured by Kollmorgen as part of their S600 Servo Drive Series. This drive features a rated output current of 10 arms and a peak output current 20 arms. It also withholds a voltage rating of 230-480 V and a Max. continuous performance of 1.5 kW.

S61000-SE
The Kollmorgen S61000-SE is a part of the S600 Servo Drives series and features an operational voltage range of 230-480 V. It has a peak output current of 20 arms and operates with a noise emission level of 45 dB(A). Additionally, it boasts an IP 20 enclosure rating.

S61001
The S61001 stainless steel component features an M6 thread size, a length of 50 mm, and a tensile strength of 700 MPa. Part of the S600 Servo Drives series by Kollmorgen, it offers high corrosion resistance and can operate efficiently within a temperature range of -40°C to 400°C.

S61001-550
The S61001-550 was manufactured by Kollmorgen as part of their S600 Servo Drive Series. This drive features a rated output current of 10 arms and a peak output current 20 arms. It also withholds a voltage rating of 230-480 V and a Max. continuous performance of 1.5 kW.

S61001-PB
The S61001-PB is a compact sensor with a sensing distance of 10 mm and an IP67 rating for superior durability. Manufactured by Kollmorgen as part of the ServoStar S600 series, it operates on a supply voltage of 10–30 VDC. The sensor features a response frequency of 200 Hz.

S61001-SE
The S61001-SE was manufactured by Kollmorgen as part of their S600 Servo Drive Series. This drive features a rated output current of 10 arms and a peak output current 20 arms. It also withholds a voltage rating of 230-480 V and a Max. continuous performance of 1.5 kW.

S61400
The S61400 servo drive offers a rated output current of 14 Arms, a peak output current of 28 Arms, and has a maximum load inductance of 15 mH. Part of the S600 Servo Drives by Kollmorgen, it features a protection class of IP20 and an auxiliary power supply voltage of 24 VDC.

S61400-NA
The S61400-NA was manufactured by Kollmorgen as part of their S600 Servo Drive Series. This drive features a rated output current of 14 arms and a peak output current 28 arms. It also withholds a voltage rating of 230-480 V and a Max. continuous performance of 1.5 kW.

S61401
The S61401 servo drive from Kollmorgen comes with a 4-20 mA signal output. Part of the S600 Servo Drives, it features IP66 ingress protection and operates on a supply voltage of 12-24 VDC. It functions in temperatures from -40 to 85°C with a response time of 100 ms.

S61401-550
The S61401-550 servo drive is constructed from CRES 17-7PH material and features an inside diameter of 0.171–0.181 inches. Part of the S600 Servo Drives from Kollmorgen, it adheres to the MS20002C specification and boasts edge conditions free from burrs.

S61401-560
The S61401-560 panel fastener is constructed from steel, features a zinc plated finish, and supports a panel thickness range of 0.8 mm to 2.3 mm. As part of the S600 Servo Drives series by Kollmorgen, it has an M6 thread size and offers a maximum tensile strength of 400 Newtons.

S61401-SE
The S61401-SE was manufactured by Kollmorgen as part of their S600 Servo Drive Series. This drive features a rated output current of 14 arms and a peak output current 28 arms. It also withholds a voltage rating of 230-480 V and a Max. continuous performance of 1.5 kW.

S62000
The S62000 is a servo drive with a rated output current of 20 Arms. Manufactured by Kollmorgen as part of the S600 Servo Drives series, it supports a rated supply voltage ranging from 3 x 230V-10% to 480V+10% at 50/60 Hz. This drive operates with a clock frequency of 8 kHz.

S62000-550
The S62000-550 is a maintenance free servo drive from Kollmorgen. The drive operates with rated DC bus link voltage of 290 to 675 volts. It operates with a clock frequency of about 8 kilohertz and can product a peak output current of 40 amperes.

S62000-NA
The S62000-NA was manufactured by Kollmorgen as part of their S600 Servo Drive Series. This drive features a rated output current of 20 arms and a peak output current 40 arms. It also withholds a voltage rating of 230-480 V and a Max. continuous performance of 1.5 kW.

S62000-PB
The Kollmorgen S62000-PB, part of the S600 Servo Drives series, features a stainless steel construction and an open seal type. It has a bore diameter of 10 mm and can achieve a limiting speed of 22,000 rpm with oil. Its precision rating is ABEC 1.

S62001
The S62001 deep groove ball bearing is made from stainless steel and features a bore diameter of 12 mm. Part of the S600 Servo Drives series by Kollmorgen, it offers a dynamic load rating of 2,350 N and operates within a temperature range of -30°C to +120°C.

S62001-SE
The S62001-SE was manufactured by Kollmorgen as part of their S600 Servo Drive Series. This drive features a rated output current of 20 arms and a peak output current 40 arms. It also withholds a voltage rating of 230-480 V and a Max. continuous performance of 1.5 kW.

S64001
The Kollmorgen S64001, a part of the S600 Servo Drives series, operates with a rated voltage range of 3-Phase 230 to 480 V AC. It features dimensions of 345 x 250 x 380 mm and provides 30 kVA power. The device has an IP20 protection class and peaks at an output current of 80 A.

S64001-EC
The S64001-EC was manufactured by Kollmorgen as part of their S600 Servo Drive Series. This drive features a rated output current of 40 arms and a peak output current 80 arms. It also withholds a voltage rating of 230-480 V and a Max. continuous performance of 6 kW.

S67001
The S67001 fastener is made of stainless steel, features an M6 thread size with a 1.0 mm pitch, and offers high corrosion resistance. Part of the S600 Servo Drives by Kollmorgen, it complies with ISO 4762 standards and boasts a tensile strength of 700 MPa with a polished finish.

S6961NP
The S6961NP servo drive operates on 105-132 VAC single-phase input at 50/60 Hz. Manufactured by Kollmorgen as part of the S600 Servo Drives series, it offers a selectable motor current range from 0.1 to 6.0 Amps per phase. It features advanced protection and anti-resonance capabilities.

SE06000-000000
The Kollmorgen SE06000-000000 belongs to the S600 Servo Drives series and features a digital servo amplifier design. It operates with a supply voltage range of 3×208V to 480V at 50/60 Hz and boasts a rated DC bus link voltage of 260 V to 675 V. With an IP20 protection rating, it supports industrial applications.

SE06200-Y066
The Kollmorgen SE06200-Y066 is part of the S600 Servo Drives, featuring a motion controller. The servo drive operates with a power supply of 230VAC and outputs a voltage of 310VDC. It functions as a 3-phase drive and has a current rating of 6 Amps.

SERVOSTAR
A supply filter on the SERVOSTAR servo ensures noise from the mains is filtered out for optimal operation. For maintenance, the casing can be cleaned with isopropanol, but internal dust removal should be performed only by the manufacturer. The amplifier is designed for easy disposal, with main components including an aluminum heatsink, steel housin…

Servostar 603-110V
The Servostar 603-110V controller module features two CAN interfaces and operates within a 100-240 VAC input voltage range. Part of the S600 Servo Drives series and manufactured by Kollmorgen, it is electrically isolated and requires a TB712 terminal block for screw-in mounting.

SERVOSTAR-600
The proportional control loop (Kp) on the SERVOSTAR-600 allows for precise motor speed control within a ~10 V range. Proper installation procedures are critical; shielding should use metalized connector housings to minimize interference. Feedback lines should not be lengthened to maintain shielding integrity, and power cables must comply with EN 60…

SERVOSTAR-601
The SERVOSTAR-601 is a servo drive manufactured by Kollmorgen. Part of the S600 Servo Drives series, it has a rated supply voltage of 3 x 230V to 480V at 50 Hz. Its rated output current is 1.5 A with a peak output of 3 A. The DC bus link voltage offers a range of 290 to 675 V.

SERVOSTAR-601-AS
On the SERVOSTAR-601-AS, Internal count pulses occur every 1/220 of a turn for precise feedback, and the brake circuit efficiently dissipates power. The DC bus link offers smoothed and rectified voltage for steady operation during load variations. Compatible with various fieldbuses like CANopen, PROFIBUS, and SERCOS, it supports advanced system int…

SERVOSTAR-601-AS-FAN
The SERVOSTAR-601-AS-FAN amplifier supports a maximum cable output impedance of 150 ohms and a cable capacitance of up to 30 nF/km. Furthermore, the system offers various fieldbus interfaces, including CANopen, PROFIBUS, and SERCOS, allowing for flexible network configurations.

SERVOSTAR-601-I/O-14/08
The SERVOSTAR-601-I/O-14/08 amplifier also manages Ipeak (peak current) and Irms (continuous current), requiring proper Kp (P-gain) adjustments for optimal control loop performance. Configuration is facilitated by the DRIVEGUI.EXE software, allowing users to change and store operating parameters.

SERVOSTAR-603
The SERVOSTAR-603 servo drive offers a rated output current of 3A, a peak output current of 6A for short durations, and an enclosure protection rating of IP20. Part of the S600 Servo Drives series by Kollmorgen, it operates within an ambient temperature range of 0 degrees C to +45 degrees C.

SERVOSTAR-603-AS
The SERVOSTAR-603-AS features a ROD interface for incremental position output and handles peak current effectively. Software installation is straightforward, with an autostart option or manual setup via CD-ROM. The amplifier accommodates incremental or sine encoders with hall sensors, providing feedback, but requires customer service support if cab…

SERVOSTAR-603-AS-BV
The DC bus link provides smoothed, rectified voltage for consistent performance under varying loads. Compatible with multiple fieldbuses like CANopen, PROFIBUS, and SERCOS, the SERVOSTAR-603-AS-BV also interfaces directly with 2-pole resolvers common in rotary servomotors.

SERVOSTAR-603A-AS-PROFI
The SERVOSTAR-603A-AS-PROFI amplifier also supports a reversing mode for changing motor direction and includes a ROD-interface for incremental position output. Additional protection is provided through a power contactor with phase control and ferrite rings for noise suppression.

SERVOSTAR-606
The SERVOSTAR-606 servo drive offers a peak output current of 12 Arms and a rated output current of 6 Arms (±3%). As part of the S600 Servo Drives Series by Kollmorgen, it supports rated supply voltages from 3×208V to 480V and a clock frequency of up to 16 kHz.

SERVOSTAR-606-AS
For motor connections on the SERVOSTAR-606-AS amplifier, a brake is integrated via X9, with precautions necessary for cable capacitance and motor inductance. Motors with class F insulation (IEC 60085) are recommended to ensure safety and longevity.

SERVOSTAR-606-AS-FAN
The system supports feedback from encoders with EnDat or HIPERFACE interfaces for smooth motor operation. For cable lengths exceeding 50 meters, customer service assistance is recommended, with a frequency limit of 350 kHz for both channels.

SERVOSTAR-606-FAN
The amplifier controls RMS current (Irms) and maintains internal temperatures below 55C during operation and under 60C for the heat sink. It supports incremental encoders with a frequency limit of 1.5 MHz and sine-cosine encoders up to 350 kHz, employing a “wake & shake” procedure for position feedback upon powering up.

SERVOSTAR-610
The SERVOSTAR-610 supports a reversing mode for periodic direction changes and features Kp P-gain control loop adjustment for optimized system response. Cooling is managed by a fan that activates when internal temperatures exceed 58C or the heat sink reaches 65C, with an internal brake resistor capable of dissipating over 30 W during braking.

SERVOSTAR-610-AS
The amplifier includes an SSI interface for precise cyclically absolute position feedback and setpoint ramps for gradual speed adjustments. The rectified and smoothed DC bus link provides stable power, while compatibility with various fieldbuses like CANopen, PROFIBUS, and SERCOS makes it adaptable for diverse industrial communication networks.

SERVOSTAR-610-AS-FAN
The control loop includes Tn and I-integration time for enhanced accuracy. The SERVOSTAR-610-AS-FAN amplifier supports an SSI interface for cyclically absolute position feedback and has a supply filter to eliminate interference from power cables.

SERVOSTAR-610-AS-PROFI
The SERVOSTAR-610-AS-PROFI amplifier effectively manages Ipeak and Irms values, with a variable Kp P-gain for improved precision in control loops. Thermal management is ensured by activating fans when internal temperatures exceed 551/4C, maintaining heat sink temperatures below 601/4C.

SERVOSTAR-614
On the SERVOSTAR-614, a forced fan activates at temperatures above 58C, while the internal brake resistor can dissipate over 30 W to enhance braking performance. It features a resolver/digital transducer for analog-to-digital signal conversion, a power contactor with phase monitoring for protection, and adjustable control loop gain (Kp) for fine-tu…

SERVOSTAR-614-AS
The DC bus link acts as an uninterruptible power source, providing rectified and smoothed power. Additionally, the SERVOSTAR-614-AS supports various fieldbuses like CANopen, PROFIBUS, and SERCOS for compatibility with different industrial communication networks.

SERVOSTAR-620
The SERVOSTAR-620 supports a reversing mode for periodic direction changes, while a ROD interface provides incremental position output. A resolver/digital converter translates the angular resolver’s continuous output into digital form for improved performance.

SERVOSTAR-620-AS
The SERVOSTAR-620-AS SSI interface provides absolute serial position feedback in both static and dynamic modes, with speed limits adjustable to maintain accuracy within ~10 V. The internal temperature remains below 55C, while the heat sink stays under 60C.

SERVOSTAR-620-AS-FAN
The SERVOSTAR-620-AS-FAN amplifier monitors Irms and Ipeak values to ensure consistent motor performance and supports GRAY-code representation for position control. Input drift due to temperature changes and aging is effectively managed. A holding brake feature activates only when the motor is stationary, enhancing safety when idle.

SERVOSTAR-640
The SERVOSTAR 640 also features an electrically operated power contactor for phase monitoring and system protection, and supports a reversing mode for applications requiring periodic direction changes. The ROD interface provides incremental position output with internal counting pulses rated at 220:1 for enhanced precision.

SERVOSTAR-650
The SERVOSTAR-650 amplifier includes correction induction Tn for optimizing the closed-loop control circuit and an SSI interface for cyclically absolute positional serial output, critical for precise positioning applications. Setpoint ramps are incorporated to limit speed changes, allowing for smooth acceleration and deceleration.

SERVOSTAR-670
The SERVOSTAR-670 features Tn, I-integration time in the control loop, enhancing fine-tuning for precision motion and positioning through its SSI interface, which offers cyclically absolute