S7720C-NANA-NA
The S7720C-NANA-NA Kollmorgen digital servo amplifier is equipped with a STO function. This servo amplifier must be used only in the specified configuration. It is set up using the DRIVEGUI.EXE software.

S7720C-NANA-PA
The S7720C-NANA-PA digital servo amplifier by Kollmorgen has only one expansion card. This servo amplifier supports encoder emulation through its X5 connector.

S7720C-NANA-PM
The S7720C-NANA-PM Kollmorgen digital servo amplifier has a PosI/O expansion card in its third slot. This servo amplifier features cogging suppression functionality. It comes with Ethernet connectivity onboard.

S7720C-NANA-S3
The S7720C-NANA-S3 Kollmorgen digital servo amplifier comprises a coldplate with a flatness of less than or equal to 25 µm. This device is prone to condensation if the difference between the environment temperature and the coldplate temperature is more than 10K. It portrays an ambient site altitude of up to 1000 m above sea level.

S7720C-NANA-S4
The S7720C-NANA-S4 digital servo amplifier by Kollmorgen must be transported without its components getting bent. This servo amplifier has a pollution level of 2 according to EN 60064-1 specifications. It comes with a built-in fan.

S7720C-PBF2-F2
The S7720C-PBF2-F2 digital servo amplifier by Kollmorgen must have unimpeded ventilation inside the closed switchgear cabinet. This servo amplifier must be placed on a conductive surface. It is RoHS compliant.

S7720C-PBF2-NA
The S7720C-PBF2-NA Kollmorgen digital servo amplifier has two programmable differential analog inputs. This servo amplifier can be programmed using its RS 232 interface. It comes with a fan controller in the second slot.

S7720C-PBF2-PA
The S7720C-PBF2-PA digital servo amplifier by Kollmorgen has two programmable differential analog inputs. This servo amplifier is integrated with a power supply. It is possible to connect three amplifiers by the DC bus link if the mains supply is from the same series.

S7720C-PBF2-PM
The S7720C-PBF2-PM Kollmorgen digital servo amplifier has two programmable digital inputs. This servo amplifier also features an RS 232 interface for a PC connection. Its Ethernet interface depicts two RJ-45 connectors to communicate with fieldbus devices.

S7720C-PBF2-S3
The S7720C-PBF2-S3 Kollmorgen digital servo amplifier wiring must be done according to the connection diagram in its manual. This servo amplifier can be associated with a drive address ranging between 0 and 63. Its parameters can be modified using the setup software.

S7720C-PBF2-S4
The S7720C-PBF2-S4 digital servo amplifier by Kollmorgen can be connected to a PC along with other amplifiers. This servo amplifier has two operating keys on the front panel. It must be switched off before removing or inserting a memory card.

S7720C-PNF2-F2
The S7720C-PNF2-F2 digital servo amplifier from Kollmorgen has a STO function with two input channels. This servo amplifier comprises a Profinet expansion card in the first slot. It supports MMC and SD type memory cards.

S7720C-PNF2-NA
The Kollmorgen S7720C-PNF2-NA digital servo amplifier comes with a resolver evaluation onboard. This amplifier encompasses a 24 V pulse direction interface. Its power section comprises interference suppression filters.

S7720C-PNF2-PA
The S7720C-PNF2-PA digital servo amplifier from Kollmorgen must be matched to a motor in terms of current and voltage ratings. This servo amplifier has an LED display on the front panel. It has the ability to suppress cogging.

S7720C-PNF2-PM
The Kollmorgen S7720C-PNF2-PM digital servo amplifier controls the holding brake of a motor. This servo amplifier must be installed in a switchgear cabinet with at least an IP 54 protection class. It has not been evaluated for a DC input by the manufacturer.

S7720C-PNF2-S3
The Kollmorgen S7720C-PNF2-S3 digital servo amplifier has an integrated power supply. The servo amplifier can cause equipment damage or personnel injury if it is not used as directed. It uses a cable with a maximum length of 30 m for its 24 V electronics.

S7720C-PNF2-S4
The S7720C-PNF2-S4 digital servo amplifier from Kollmorgen can be linked with another amplifier for master-slave operation. This amplifier is wired to a stepper motor controller with a 24 V signal. It comes with integrated EMC filters.

S7720C-SEF2-F2
The S7720C-SEF2-F2 digital servo amplifier from Kollmorgen should be earthed to the protective earth busbar. This servo amplifier features a maximum relative humidity of 85% when it is in use. Its capacitors have dangerous voltages for up to 10 minutes after turning off the power supply.

S7720C-SEF2-NA
The Kollmorgen S7720C-SEF2-NA digital servo amplifier is equipped with a coldplate. This amplifier has a dual channel STO function. It can be equipped with a 5 V incremental encoder with a Hall sensor as a feedback unit.

S7720C-SEF2-PA
The S7720C-SEF2-PA digital servo amplifier from Kollmorgen uses fiber optic cables for its Sercos connection. This servo amplifier associated software is compatible with Windows 2000, XP, VISTA, 7 / 8 / 10 operating systems. It must be wired according to the instructions given for its electrical installation in its manual.

S7720C-SEF2-PM
The Kollmorgen S7720C-SEF2-PM digital servo amplifier has a slot at the top to insert a memory card. This servo amplifier must be fitted with a warning sign of a possible restart after powering on if the AENA parameter is set to 1. Its setup software can be downloaded from the accompanying CD-ROM or the manufacturer’s website.

S7720C-SEF2-S3
The Kollmorgen S7720C-SEF2-S3 digital servo amplifier renders fast feedback evaluation. This servo amplifier has an optimized resolver interface. It has a width of 190 mm.

S7720C-SEF2-S4
The S7720C-SEF2-S4 digital servo amplifier from Kollmorgen comes with Ethernet connectivity onboard. This servo amplifier has many safety related functions. Its STO outputs are floating outputs.

S7720C-SNF2-F2
The S7720C-SNF2-F2 Kollmorgen digital servo amplifier comes with a coldplate. This servo amplifier can be cleaned only on its exteriors. Its installation must be done only by trained personnel.

S7720C-SNF2-PA
The S7720C-SNF2-PA Kollmorgen digital servo amplifier comes with Ethernet connectivity onboard. This servo amplifier is equipped with autotuning features. It portrays fast feedback evaluation.

S7720C-SNF2-PM
The S7720C-SNF2-PM digital servo amplifier by Kollmorgen allows easy modification of parameters as it has a continuous connection. This servo amplifier is connected to a serial interface on a PC. It is important to observe the safety instructions specified in its manuals.

S7720C-SNF2-S3
The S7720C-SNF2-S3 digital servo amplifier by Kollmorgen must be set up by personnel with expertise in drive technology. This servo amplifier should be used as an integral component of an electrical plant or machine. It must be used in compliance with its technical data.

S7720C-SNF2-S4
The S7720C-SNF2-S4 digital servo amplifier from Kollmorgen is used to drive different types of motors. This motor has a coldplate electrical/mechanical option. It has a Synqnet expansion card in the first slot.

S7720F-2CF2-F2
The S7720F-2CF2-F2 is a digital servo amplifier produced by Kollmorgen. The amplifier is designed to be used exclusively for synchronous, asynchronous, and DC motors. It belongs to the overvoltage category III and features a built-in air blower that maintains dissipates excess heat by forced ventilation. A 3-character display is integrated into the…

S7720F-2CF2-NA
The S7720F-2CF2-NA servo drive ensures precision in speed and position control with robust features for industrial use. This model is ideal for demanding settings in packaging, manufacturing, and robotics.

S7720F-2CF2-PA
The Kollmorgen S7720F-2CF2-PA digital servo amplifier is equipped with a 2CAN expansion module in the first slot, a fan controller in the second slot, and a Posl/O Monitor in the third slot. The rated current of the unit is 72 A.

S7720F-2CF2-PM
The S7720F-2CF2-PM is a digital servo amplifier produced by Kollmorgen. The amplifier is designed to be used exclusively for synchronous, asynchronous, and DC motors. It belongs to the overvoltage category III and features a built-in air blower that maintains dissipates excess heat by forced ventilation. A 3-character display is integrated into the…

S7720F-2CF2-S3
The Kollmorgen S7720F-2CF2-S3 digital servo amplifier is equipped with the 2CAN expansion module in the first slot. The device has an in-built fan for ventilation. It has a rated current of 72 Arms.

S7720F-2CF2-S4
The Kollmorgen S7720F-2CF2-S4 digital servo amplifier is equipped with a 2CAN expansion module in the first slot. The device should be mounted in a closed control cabinet. It has a nameplate attached to its side.

S7720F-DNF2-F2
The S7720F-DNF2-F2 is a digital servo amplifier produced by Kollmorgen. The amplifier is designed to be used exclusively for synchronous, asynchronous, and DC motors. It belongs to the overvoltage category III and features a built-in air blower that maintains dissipates excess heat by forced ventilation. A 3-character display is integrated into the…

S7720F-DNF2-NA
The model offers effective operation and integration with features like a rated input power of 50 kVA and protection against solid objects. The drive has compact dimensions and weighs 13 kg.

S7720F-DNF2-PA
The Kollmorgen S7720F-DNF2-PA digital servo amplifier features the DEVICENET expansion module in its first slot. The rated current of the device is 72 A. Its electrical/mechanical option is coated PCBs.

S7720F-DNF2-PM
The S7720F-DNF2-PM is a digital servo amplifier produced by Kollmorgen. The amplifier is designed to be used exclusively for synchronous, asynchronous, and DC motors. It belongs to the overvoltage category III and features a built-in air blower that maintains dissipates excess heat by forced ventilation. A 3-character display is integrated into the…

S7720F-DNF2-S3
The Kollmorgen S7720F-DNF2-S3 digital servo amplifier has a DeviceNet expansion module in the first slot. There is a fan controller in the second slot. The device has a dual-channel STO function.

S7720F-DNF2-S4
The Kollmorgen S7720F-DNF2-S4 digital servo amplifier is equipped with a DeviceNet expansion card in the first slot. The device has an in-built fan. It has a rated current of 72 Arms.

S7720F-EIF2-F2
The S7720F-EIF2-F2 is a digital servo amplifier produced by Kollmorgen. The amplifier is designed to be used exclusively for synchronous, asynchronous, and DC motors. It belongs to the overvoltage category III and features a built-in air blower that maintains dissipates excess heat by forced ventilation. A 3-character display is integrated into the…

S7720F-EIF2-NA
The S7720F-EIF2-NA is a digital servo amplifier produced by Kollmorgen. The amplifier is designed to be used exclusively for synchronous, asynchronous, and DC motors. It belongs to the overvoltage category III and features a built-in air blower that maintains dissipates excess heat by forced ventilation. A 3-character display is integrated into the…

S7720F-EIF2-PA
The Kollmorgen S7720F-EIF2-PA digital servo amplifier comes with an I/O Extension in the first slot. The rated voltage of the device is 208 to 480 V. The unit weighs 13 kg.

S7720F-EIF2-PM
The Kollmorgen S7720F-EIF2-PM digital servo amplifier is equipped with a fan controller in its second slot. The device has a current rating of 72 Arms and a voltage rating of 208 to 480 V.

S7720F-EIF2-S3
The Kollmorgen S7720F-EIF2-S3 digital servo amplifier features the I/O Extension module in the first slot. The device has the safety card S1-2, SIL 3 in the second slot. It has a rated current of 72 Arms.

S7720F-EIF2-S4
The Kollmorgen S7720F-EIF2-S4 digital servo amplifier must be installed inside a control cabinet. This servo amplifier is designed for industrial use. Its wiring must be done using copper conductors.

S7720F-FBF2-F2
The S7720F-FBF2-F2 is a digital servo amplifier produced by Kollmorgen. The amplifier is designed to be used exclusively for synchronous, asynchronous, and DC motors. It belongs to the overvoltage category III and features a built-in air blower that maintains dissipates excess heat by forced ventilation. A 3-character display is integrated into the…

S7720F-FBF2-NA
The S7720F-FBF2-NA is a digital servo amplifier produced by Kollmorgen. The amplifier is designed to be used exclusively for synchronous, asynchronous, and DC motors. It belongs to the overvoltage category III and features a built-in air blower that maintains dissipates excess heat by forced ventilation. A 3-character display is integrated into the…

S7720F-FBF2-PA
The Kollmorgen S7720F-FBF2-PA digital servo amplifier has a rated current of 72 Arms. The device has a nameplate for identification. It has a FB-2to1 expansion module in the first slot.

S7720F-FBF2-PM
The Kollmorgen S7720F-FBF2-PM digital servo amplifier features a 3-character LED display to show its status. There is an in-built fan for ventilation. The device has a naming plate attached to its side for identification.

S7720F-FBF2-S3
The Kollmorgen S7720F-FBF2-S3 digital servo amplifier has an in-built fan for ventilation. It should be mounted in a vertical position. The setup software of the device is DRIVEGUI.EXE.

S7720F-FBF2-S4
The S7720F-FBF2-S4 digital servo amplifier by Kollmorgen portrays overvoltage category III. This servo amplifier is used in combination with a motor from the manufacturer. It is a standard amplifier without customization.

S7720F-NAF2-F2
The S7720F-NAF2-F2 is a digital servo amplifier produced by Kollmorgen. The amplifier is designed to be used exclusively for synchronous, asynchronous, and DC motors. It belongs to the overvoltage category III and features a built-in air blower that maintains dissipates excess heat by forced ventilation. A 3-character display is integrated into the…

S7720F-NAF2-NA
The Kollmorgen S7720F-NAF2-NA servo amplifier ensures precise and safe control of various motors with reliable environmental adaptability. This model is particularly suited for applications requiring precise motor control.

S7720F-NAF2-PA
The Kollmorgen S7720F-NAF2-PA digital servo amplifier is intended to work with a compatible servomotor. The device has a rated current of 72 Arms. Coated PCBs are its electrical/mechanical option.

S7720F-NAF2-PM
The S7720F-NAF2-PM is a digital servo amplifier produced by Kollmorgen. The amplifier is designed to be used exclusively for synchronous, asynchronous, and DC motors. It belongs to the overvoltage category III and features a built-in air blower that maintains dissipates excess heat by forced ventilation. A 3-character display is integrated into the…

S7720F-NAF2-S3
The Kollmorgen S7720F-NAF2-S3 digital servo amplifier has a fan controller in the second slot. The device has a voltage rating of 208 to 480 V. It has excellent cogging suppression capabilities.

S7720F-NAF2-S4
The Kollmorgen S7720F-NAF2-S4 digital servo amplifier has a built-in fan for ventilation with a fan controller in the second slot. The device should be mounted on a conductive surface.

S7720F-NANA-F2
The S7720F-NANA-F2 is a digital servo amplifier produced by Kollmorgen. The amplifier is designed to be used exclusively for synchronous, asynchronous, and DC motors. It belongs to the overvoltage category III and features a built-in air blower that maintains dissipates excess heat by forced ventilation. A 3-character display is integrated into the…

S7720F-NANA-NA
The model S7720F-NANA-NA offers precise and efficient motion control in industrial tasks. The model ensures reliable performance across a voltage range of 208 to 480 volts.

S7720F-NANA-PA
The Kollmorgen S7720F-NANA-PA digital servo amplifier is equipped with a Posl/O monitor in its third slot. The device has a dual-channel STO function. There is an in-built fan for ventilation.

S7720F-NANA-PM
The S7720F-NANA-PM is a digital servo amplifier produced by Kollmorgen. The amplifier is designed to be used exclusively for synchronous, asynchronous, and DC motors. It belongs to the overvoltage category III and features a built-in air blower that maintains dissipates excess heat by forced ventilation. A 3-character display is integrated into the…

S7720F-NANA-S3
The Kollmorgen S7720F-NANA-S3 digital servo amplifier is equipped with the safety card S1-2, SIL 3 in the first slot. The rated current of the unit is 72 Arms. It has an LED display to indicate its operating status.

S7720F-NANA-S4
The Kollmorgen S7720F-NANA-S4 digital servo amplifier has excellent autotuning capability. The device has a S1-2, SIL 2 safety card in its third slot. The rated current of the amplifier is 72 Arms.

S7720F-PBF2-F2
The S7720F-PBF2-F2 is a digital servo amplifier produced by Kollmorgen. The amplifier is designed to be used exclusively for synchronous, asynchronous, and DC motors. It belongs to the overvoltage category III and features a built-in air blower that maintains dissipates excess heat by forced ventilation. A 3-character display is integrated into the…

S7720F-PBF2-NA
The S7720F-PBF2-NA model is a robust servo drive with a 50 kVA rating and adaptable digital inputs. It is lightweight, easy to install, and features a built-in fan.

S7720F-PBF2-PA
The Kollmorgen S7720F-PBF2-PA digital servo amplifier with a current rating of 72 Arms. The device has the PROFIBUS expansion module in its first slot. There is a nameplate attached to the device for identification.

S7720F-PBF2-PM
The S7720F-PBF2-PM is a digital servo amplifier produced by Kollmorgen. The amplifier is designed to be used exclusively for synchronous, asynchronous, and DC motors. It belongs to the overvoltage category III and features a built-in air blower that maintains dissipates excess heat by forced ventilation. A 3-character display is integrated into the…

S7720F-PBF2-S3
The Kollmorgen S7720F-PBF2-S3 digital servo amplifier has a voltage rating of 208 to 480 V. Coated PCBs are its electrical/mechanical option. The device has a nameplate attached to its side for identification.

S7720F-PBF2-S4
The Kollmorgen S7720F-PBF2-S4 digital servo amplifier features the PROFIBUS expansion card in the first slot. The voltage rating of the device is 208 to 480 V. It has a three-character LED display.

S7720F-PNF2-F2
The S7720F-PNF2-F2 is a digital servo amplifier produced by Kollmorgen. The amplifier is designed to be used exclusively for synchronous, asynchronous, and DC motors. It belongs to the overvoltage category III and features a built-in air blower that maintains dissipates excess heat by forced ventilation. A 3-character display is integrated into the…

S7720F-PNF2-NA
The S7720F-PNF2-NA is a digital servo amplifier produced by Kollmorgen. The amplifier is designed to be used exclusively for synchronous, asynchronous, and DC motors. It belongs to the overvoltage category III and features a built-in air blower that maintains dissipates excess heat by forced ventilation. A 3-character display is integrated into the…

S7720F-PNF2-PA
The Kollmorgen S7720F-NAF2-S3 digital servo amplifier has a fan controller in the second slot. The device has a voltage rating of 208 to 480 V. It has excellent cogging suppression capabilities.

S7720F-PNF2-PM
The Kollmorgen S7720F-PNF2-PM digital servo amplifier is equipped with a fan controller in the second slot. The voltage rating of the device is 208 V to 480 V. The setup software of the amplifier is DRIVEGUI.EXE.

S7720F-PNF2-S3
The Kollmorgen S7720F-PNF2-S3 digital servo amplifier has the Safety card S1-2, SIL 3 in the third slot. The device has coated PCBs as its electrical/mechanical option. It has a name plate attached to its side.

S7720F-PNF2-S4
The S7720F-PNF2-S4 digital servo amplifier from Kollmorgen must be installed and commissioned only after reading the associated documentation. This servo amplifier controls the holding brake of the associated motor. It has a residual voltage for a brief period after turning off the power supply.

S7720F-SEF2-F2
The S7720F-SEF2-F2 is a digital servo amplifier produced by Kollmorgen. The amplifier is designed to be used exclusively for synchronous, asynchronous, and DC motors. It belongs to the overvoltage category III and features a built-in air blower that maintains dissipates excess heat by forced ventilation. A 3-character display is integrated into the…

S7720F-SEF2-NA
The S7720F-SEF2-NA is a digital servo amplifier produced by Kollmorgen. The amplifier is designed to be used exclusively for synchronous, asynchronous, and DC motors. It belongs to the overvoltage category III and features a built-in air blower that maintains dissipates excess heat by forced ventilation. A 3-character display is integrated into the…

S7720F-SEF2-PA
The Kollmorgen S7720F-SEF2-PA digital servo amplifier is equipped with the SERCOS II expansion module in the first slot. The device has a voltage rating of 208 to 480 V. It has a three-character LED display.

S7720F-SEF2-PM
The S7720F-SEF2-PM digital servo amplifier from Kollmorgen is equipped with a SERCOS II, fan controller, and PosI/O expansion cards. The device has a current rating of 72 Arms.

S7720F-SEF2-S3
The Kollmorgen S7720F-SEF2-S3 digital servo amplifier is equipped with a SERCOS II expansion module in the first slot. The device has a two-channel STO function. It has a nameplate for identification.

S7720F-SEF2-S4
The S7720F-SEF2-S4 digital servo amplifier from Kollmorgen must be handled only by properly qualified personnel. This servo amplifier encompasses electrostatically dangerous components. It may restart automatically based on the parameter setting.

S7720F-SNF2-F2
The S7720F-SNF2-F2 is a digital servo amplifier produced by Kollmorgen. The amplifier is designed to be used exclusively for synchronous, asynchronous, and DC motors. It belongs to the overvoltage category III and features a built-in air blower that maintains dissipates excess heat by forced ventilation. A 3-character display is integrated into the…

S7720F-SNF2-PA
The Kollmorgen S7720F-SNF2-PA digital servo amplifier features an in-built fan for cooling. There is a fan controller in the second slot. The device has a SynqNet expansion module in the first slot.

S7720F-SNF2-PM
The S7720F-SEF2-PM digital servo amplifier from Kollmorgen has an in-built fan for ventilation. The device has a SynqNet expansion card in its first slot. There is a 3-character LED display to indicate its operating status.

S7720F-SNF2-S3
The Kollmorgen S7720F-SNF2-S3 digital servo amplifier has a 3-character LED display to indicate its status. The device has a voltage rating of 208 to 480 V. It has a fan controller in the second slot.

S7720F-SNF2-S4
The S7720F-SNF2-S4 Kollmorgen digital servo amplifier must be installed and commissioned only after reading the associated documentation. This servo amplifier has a hot surface when it is in use. It must be earthed to the protective busbar in the switch cabinet.