The Honeywell TK-MDP081 is a high-performance Pulse Input Module designed for the Experion PKS (Process Knowledge System) Series C I/O family. This 8-channel module is specifically engineered to interface with field devices that generate pulse-train signals, such as flow meters, tachometers, and encoders. With the part number 51404351-175, it provides precise frequency and pulse counting capabilities, essential for accurate totalization and speed monitoring in industrial processes.

For availability and detailed ordering information, please visit our model catalog.

 

Product Specifications

 

Operational Precautions

• Field Wiring Termination: Ensure that pulse signals are wired to the correct polarity on the associated IOTA (Input Output Termination Assembly). Reverse polarity can lead to missed counts or hardware errors.
• Signal Interference: Pulse inputs are highly sensitive to electrical noise. Use shielded twisted-pair cabling and ensure the shield is grounded only at the IOTA end to maintain signal integrity.
• Module Seating: When installing the module into the Series C rack, verify that the connector pins are straight. Applying excessive force to a misaligned module can damage the backplane of the IOTA.
• Configuration Limits: Verify the maximum input frequency in the Experion Control Builder. Exceeding the 50 kHz hardware limit will result in inaccurate pulse accumulation and potential buffer overflows.

FAQ (Questions & Answers)

Q: Can the TK-MDP081 be used for turbine flowmeter signals? A: Yes, it is commonly used to process raw pulse outputs from turbine flowmeters for high-accuracy liquid and gas flow totalization.

Q: Does this module support redundant configurations? A: Yes, the TK-MDP081 can be used in a redundant pair when mounted on a redundant Series C IOTA (such as the TK-TDP051) to ensure continuous monitoring.

Q: What is the significance of the -175 suffix? A: This suffix indicates the hardware revision and often confirms that the board has received G3 conformal coating, making it suitable for harsh or corrosive environments.

 

Similar Honeywell Series C Models

1. TK-TDP011 (51308331-175): Digital Input Termination Assembly (Simplex).
2. TK-PUIX01 (51404351-175): Alternative designation for the Pulse Input Module assembly.
3. TK-FTEB01 (51309512-175): Fault Tolerant Ethernet Bridge module for C300 controllers.
4. TK-IAH161 (51403479-175): 16-channel HART Analog Input Module.
5. TK-ODA161 (51403476-175): 16-channel Digital Output Module (24V DC).