The Kongsberg C2 Remote Digital I/O Module is a sophisticated industrial component designed for seamless integration within marine and offshore automation systems. It serves as a reliable bridge between field sensors/actuators and the central control unit, ensuring high-speed data transmission and robust signal integrity in harsh environments.

 

Product Overview

This module is engineered for distributed control architectures, allowing for localized signal processing that reduces cabling complexity. It supports multiple digital input and output channels with built-in diagnostic capabilities, making it a cornerstone for the Kongsberg C2 series automation platforms.

 

Technical Datasheet

General Specifications

• Product Name: Kongsberg C2 Remote Digital I/O
• Type: Distributed I/O Module
• Communication: Dual redundant fieldbus support
• Power Supply: 24V DC nominal (range 18-32V DC)
• Digital Inputs: Opto-isolated, 24V DC logic
• Digital Outputs: Short-circuit protected, high-side switches
• Operating Temperature: -15°C to +70°C
• Storage Temperature: -40°C to +85°C
• Dimensions: 145mm x 120mm x 45mm
• Weight: 0.85 kg
• Country of Origin: Norway

 

Application Fields

• Marine Automation: Integration with Vessel Management Systems (VMS) and Integrated Control and Monitoring Systems (ICMS).
• Offshore Platforms: Reliable I/O handling for oil and gas drilling rigs and FPSO units.
• Power Management: Monitoring and controlling shipboard power distribution and generator sets.
• Thruster Control: Real-time feedback and command execution for dynamic positioning systems.

 

Product Instructions

• Mounting: Install the module on a standard 35mm DIN rail within a protected IP-rated enclosure. Ensure adequate ventilation space around the unit.
• Wiring: Connect the 24V DC power supply to the designated terminals. Use shielded twisted-pair cables for communication lines to minimize electromagnetic interference.
• Configuration: Assign the unique station address using the onboard DIP switches or via the system software interface before powering on.
• Maintenance: Regularly inspect terminal connections for tightness and check the status LEDs (Power, Run, Error) for system health updates.

Q&A: Frequently Asked Questions

• Q: Does the C2 module support hot-swapping?
  • A: Yes, the module is designed for hot-swapping within a powered system, provided the baseplate remains energized and the system configuration allows for temporary node absence.
• Q: What do the LED indicators signify?
  • A: A green LED indicates healthy power and CPU status; a flashing yellow LED indicates active communication; a red LED signals a hardware fault or loss of signal.
• Q: Is this module compatible with older Kongsberg systems?
  • A: It is primarily designed for C2 and K-Chief 600 architectures. Compatibility with legacy systems may require a specific bus coupler or gateway.
• Q: How is the module protected against marine environments?
  • A: The internal electronics are conformal coated to resist humidity and salt-mist corrosion, meeting strict marine classification society standards.

 

Recommended Similar Models

• Kongsberg C2 RIO (Analog Input/Output)
• Kongsberg K-Chief 600 I/O Node
• Kongsberg RIO-411 Expansion Module
• Kongsberg AIM-7 Analog Input Module
• Kongsberg DIM-7 Digital Input Module