The Bently Nevada 3500/22M Transient Data Interface (TDI) module serves as the primary gateway between the 3500 Machinery Monitoring System and Bently Nevada’s System 1® condition monitoring and diagnostic software. By consolidating the functionality of a standard Rack Interface Module (RIM) with the high-speed data collection capabilities of a communication processor, it ensures seamless integration and reliable data transmission for critical rotating machinery.

 

Product Specifications

Feature	Specification
Model Number	3500/22M (PWA 138607-01 AG)
Dimensions (TDI Module)	241.3 mm x 24.4 mm x 241.8 mm (9.50 in x 0.96 in x 9.52 in)
Weight (TDI Module)	0.91 kg (2.0 lbs)
Operating Temperature	-30°C to +65°C (-22°F to +149°F)
Storage Temperature	-40°C to +85°C (-40°F to +185°F)
Humidity	95%, non-condensing
Communication	Ethernet (10Base-T/100Base-TX or 100Base-FX)
Origin	USA

 

Application Areas

The 3500/22M TDI is essential for industries requiring high-fidelity machinery protection and diagnostics, including:

• Power Generation: Monitoring turbines, generators, and compressors.
• Oil & Gas: Real-time analysis of pumps, centrifugal compressors, and motors.
• Petrochemical/Industrial: Condition-based maintenance for critical manufacturing assets.
• Transient Analysis: Capturing dynamic waveform data during machine startup, shutdown, or process changes.

 

Product Usage Instructions

1. Installation: The 3500/22M module must be installed in the slot adjacent to the rack power supplies. Ensure the rack is powered down before insertion.
2. Configuration: Use the 3500 System Configuration software to assign the module and set communication parameters.
3. Key Switch: The front panel includes a key switch (RUN/PROGRAM). In “RUN,” settings are locked for security; in “PROGRAM,” remote reconfiguration is permitted.
4. Network Setup: Connect the Ethernet port (RJ-45 for 10/100Base-TX or Fiber Optic for 100Base-FX) to your network infrastructure to begin transmitting data to the host server.

Frequently Asked Questions (Q&A)

Q: What is the primary purpose of the 3500/22M? A: It acts as an interface that collects steady-state and transient (waveform) data from the 3500 rack and communicates this to diagnostic software like System 1®.

Q: Can I use this for non-critical machinery? A: While designed for critical machinery, it can be used on any equipment monitored by the 3500 series. However, it is most beneficial when transient data capture is required for diagnostics.

Q: Is the 3500/22M essential for rack protection? A: No, it is a data interface module. The 3500 rack will continue to provide machinery protection even if the TDI module is removed or inoperable.

 

Recommended Inventory (Available Models)

1. 3500/22M-01-01-00
2. 3500/22M-01-01-01
3. 3500/22M-02-01-00 (TMR Configuration)
4. 138607-01 (Standard TDI Module)
5. 146031-01 (10/100 Base-TX I/O Module)
6. 146032-01 (100 Base-FX I/O Module)
7. 147364-01 (Buffered Signal Output Module)
8. 3500/20 Rack Interface Module (RIM)
9. 3500/40M Proximitor Monitor
10. 3500/42M Velocity/Acceleration Monitor