The IFM 2200 is a critical communication interface module engineered for SAM Electronics and Lyngso Marine shipboard automation and monitoring systems. This unit is designed to facilitate robust data exchange between centralized alarm systems, navigation equipment, and various shipboard sensors. By providing reliable signal conversion and data routing, the module ensures that critical telemetry remains synchronized across the vessel’s control network.

 

Technical Specifications

• 📋 Model Name: IFM 2200 Interface Module
• 🏷️ Part Number: 810.001.240-05
• 🏢 Manufacturer: SAM Electronics / Lyngso Marine
• 📏 Dimensions: 240mm x 160mm x 45mm (Standard modular rack-mount design)
• ⚖️ Weight: Approximately 1.15 kg
• 🌏 Origin: Germany / Denmark
• ⚡ Operating Voltage: 24V DC
• 🔌 Connectivity: Multi-channel RS-422/RS-485 serial ports
• 🛡️ Environment: Marine-grade ruggedized housing for high-vibration and moisture-rich conditions

Frequently Asked Questions (Q&A)

What is the primary role of the IFM 2200 in a maritime system? The IFM 2200 acts as a data gateway. It receives digital information from various shipboard sub-systems, formats the data packets according to proprietary SAM/Lyngso protocols, and distributes them to the Main Control Unit (MCU) or Alarm Monitoring System (AMS).

How does this differ from the PFM 2200 module? While both belong to the 2200 series, the PFM (Printer Formatter Module) is specifically optimized for driving thermal printers, whereas the IFM (Interface Module) is a general-purpose communication bridge for system-to-system data integrity and sensor processing.

What causes an IFM 2200 to report a communication fault? Common causes include serial bus termination issues, cable shielding degradation due to saltwater air, or incorrect configuration of the DIP switches on the PCB. Always verify that the communication baud rate matches the connected master controller.

Is this module hot-swappable? Generally, no. It is recommended to isolate the 24V DC power supply to the specific rack before removing or inserting the IFM 2200 to prevent electrical transients from damaging the communication bus.

Can I update the internal firmware? Firmware updates for the 810.001.240-05 are typically performed via a dedicated serial programming cable connected to the service port, usually requiring authorized service access to the specific marine system software.

 

Recommended Series and Related Models

The following modules are part of the broader SAM/Lyngso 2000 series ecosystem, often found in the same cabinet as the IFM 2200:

• PFM 2200: Printer Formatter Module
• DAM 2000: Data Acquisition Module
• ACM 2200: Alarm Control Module
• CCM 2000: Central Control Module
• UIM 2000: User Interface Module
• MCM 2000: Master Communication Module
• ADM 2000: Analog Data Module
• SIM 2000: Signal Interface Module
• XCM 2000: Extended Communication Module
• RCM 2000: Relay Control Module