The SAACKE SE@VIS HMI 03 utilizing the Eaton XV-102-B6-35TQR-1AL-PLC is a specialized industrial operator interface used primarily in burner management and combustion control systems.

 

Product Overview

The SAACKE SE@VIS HMI 03 functions as the human-machine interface for SAACKE’s burner control platforms. It allows operators to monitor firing sequences, manage fuel settings, acknowledge alarms, and view system status in real-time. By leveraging the Eaton XV-102 series, this HMI provides a compact, reliable touch-panel solution capable of handling both visualization and integrated PLC logic tasks.

Eaton XV-102-B6-35TQR-1AL-PLC Specifications

This Eaton panel is a high-performance HMI with integrated PLC capabilities, designed for harsh industrial and maritime environments.

🔹 Display Size: 3.5-inch TFT LCD

🔹 Resolution: 320 x 240 pixels (QVGA)

🔹 Touch Technology: Resistive touch screen

🔹 Processor: High-speed internal CPU for local logic execution

🔹 Memory: Includes SD/Memory card slot for data logging and project backups

🔹 Communication Ports: Typically includes Ethernet, USB Host/Device, RS-485, and CANopen

🔹 Operating Voltage: 24V DC

🔹 IP Rating: IP65 (front panel), IP20 (rear)

🔹 Programming Environment: Often utilizes CoDeSys-based software for PLC functions

 

Key Features & Applications

• Integrated Control: The “PLC” designation in the model number indicates that the unit can perform local automation tasks (e.g., sequence control) in addition to acting as a visualization terminal.
• Marine & Industrial Certification: As part of a SAACKE system, it is frequently used in marine boiler and combustion applications, often requiring compliance with international maritime classification standards.
• Operational Flexibility: It supports multi-fuel management, allowing operators to switch fuel types or operating modes directly through the interface.
• Data Logging: The inclusion of a memory card slot allows for the storage of trend data, maintenance logs, and historical alarms, which are critical for troubleshooting burner efficiency.

 

Troubleshooting & Maintenance Tips

💡 Communication Errors: If the HMI fails to communicate with the burner controller, first verify the Ethernet or serial cable integrity. Ensure that the IP address settings on the HMI match the network requirements of the SAACKE controller.

💡 Touch Response: If the touch screen becomes unresponsive, check for debris or moisture on the surface. If the screen is physically damaged, the resistive digitizer may require a replacement unit.

💡 Memory Card Usage: Always use the recommended SD/memory card types specified in the Eaton manual. If data logging is failing, ensure the card is not write-protected and has sufficient free space.

💡 Firmware/Software: Ensure that the HMI project file is backed up. If the unit requires a factory reset, you will need the specific HMI project file (.pro or similar) to restore the SAACKE-specific interface.

Disclaimer: This HMI is a specialized component often configured with proprietary software by SAACKE. Replacement units may require re-loading the original project file to function within your specific burner installation.