ABB 500ITM02 | 1MRB150021R0116 Power Supply Module

The ABB 500ITM02, designated by the part number 1MRB150021R0116 (often recorded with an ‘O’ as 1MRB150021RO116), is a highly stable industrial power supply module engineered for ABB’s specialized control racks, protection relays, and station automation systems. This module is responsible for converting raw station auxiliary voltage (AC or DC depending on terminal layout) into precisely regulated, low-noise DC operating voltages required by sensitive backplane processors, communication cards, and binary I/O channels. Built with industrial-grade surge suppression and thermal management features, the 500ITM02 ensures continuous, uninterrupted operation of critical infrastructure protection control loops.

For inventory availability and specialized procurement details, visit the 500ITM02 1MRB150021R0116 product page.

Product Specifications (Datasheet)

General Parameters

• Product ID: 1MRB150021R0116
• Model Designation: 500ITM02
• Component Type: Subrack Power Supply Module
• Input Voltage Range: Station-specific (supports standard industrial auxiliary DC/AC ranges)
• Output Efficiency: >85% at nominal load
• Galvanic Isolation: High-dielectric isolation between input, output, and chassis ground

Physical and Origin Data

• Dimensions: 240 mm x 130 mm x 50 mm
• Weight: 0.95 kg
• Country of Origin: Switzerland / Sweden
• Cooling System: Natural convection through heavy-duty integrated aluminum heat sink

Application Fields

The 500ITM02 power module is deployed across high-reliability energy and process control sectors:

• Substation Automation: Supplying dependable internal logic power to protection relays and bay control units.
• Power Plant Control: Providing auxiliary power infrastructure within generator control and excitation panels.
• Heavy Duty Microgrids: Maintaining system voltage conditioning for remote localized power nodes.
• Industrial Infrastructure: Power distribution for specialized processing racks in mining and chemical applications.

Product Usage Instructions

1. Safety Lockout: WARNING! High voltage may be present on input terminals. Ensure all incoming auxiliary supply lines are completely de-energized and locked out before inserting or removing the module.
2. Mounting & Grounding: Slide the module firmly along the rack guide rails until the heavy-duty backplane connector is completely seated. Tighten the front panel retaining screws to secure the mechanical fit and complete the chassis safety ground path.
3. Thermal Clearance: Ensure the ventilation slots at the top and bottom of the subrack are clear of debris or wiring bundles. Adequate natural convection air currents are required to maximize the module’s operating lifespan.
4. Redundancy Checks: If used in a parallel or redundant configuration with a secondary power supply, verify that the load-sharing configurations and monitoring diode paths are active according to system drawings.

Common Questions & Answers (Q&A)

Q: Can the 500ITM02 be hot-swapped while the subrack is active? A: Unless the rack is specifically configured with a fully redundant, parallel-coupled power architecture, pulling the primary power supply card will cause an immediate system shutdown. Refer to your system line diagram before handling.

Q: What does an unlit “Power” or “OK” LED indicate on the front panel? A: It indicates either a total loss of incoming auxiliary supply voltage, an active internal short-circuit protection trip (overload), or a catastrophic failure of the internal switching circuitry.

Q: Are there internal fuses that can be replaced by the user? A: The 500ITM02 features an internal input fuse intended to protect the broader station supply network from a short within the module. If this fuse is blown, it typically points to an internal component breakdown, and replacing the module entirely is recommended.

Recommended Industrial Automation Models

1. ABB 500ITM02 1MRB150021R0116 Power Supply
2. ABB 3BHB045647R0003 Thyristor Module
3. ABB 3BHE039203R0101 GVC736CE101
4. ABB PXAH401 3BSE017235R1 Excitation Board
5. GE IS200EHPAG1A Gate Pulse Amplifier
6. GE IS200STCIH2A Mark VI Terminal Board
7. HONEYWELL CC-PAIH01 High Level Analog Input
8. HONEYWELL 8C-PDISA1 Digital Input 24V
9. BENTLY NEVADA 3500/42M 176449-02 Proximitor Monitor
10. BENTLY NEVADA 3500/22M 288055-01 Interface Module
11. TRICONEX 3625 Digital Output Module
12. TRICONEX 3721 Analog Input Module
13. TRICONEX 4351B Communication Module
14. ALSTOM MICOM P143 Feeder Management Relay
15. ALSTOM SK611021-EE Power Supply Board
16. EMERSON VE3008 DeltaV MQ Controller
17. EMERSON KJ3222X1-BA1 I/O Carrier
18. EMERSON A6110 Machine Protection Monitor
19. ABB HIEE300888R0002 UAC389AE02 Control Board
20. TRICONEX 3008 Main Processor Card