Description
The ABB 500MTM02 1MRB150020R0712 is a specialized electronic module utilized primarily within ABB’s grid automation and substation protection systems. Part of the 500 series family, the 500MTM02 serves as a sophisticated telemetry or monitoring interface, facilitating the precise acquisition of analog and digital signals from high-voltage equipment. It acts as a bridge between primary substation hardware and the central control system, providing real-time data processing, fault recording, and status monitoring to ensure the integrity of the electrical grid.
For technical support and inventory availability, visit the 500MTM02 1MRB150020R0712 product page.
Product Specifications (Datasheet)
General Parameters
- Product ID: 1MRB150020R0712
- Model Type: 500MTM02
- Series: REB500 / 500 series Substation Automation
- Application: Monitoring, Telemetry, and Interface
- Communication Protocols: Support for IEC 61850, LON, or SPA (Depending on configuration)
Physical and Origin Data
- Dimensions: 245 mm x 170 mm x 30 mm
- Weight: 0.78 kg
- Country of Origin: Switzerland
- Mounting Type: Rack-mounted / Subrack module
Application Fields
The 500MTM02 module is essential for high-reliability environments where grid stability is paramount:
- Transmission Substations: Monitoring busbar protection and circuit breaker status.
- Renewable Energy Integration: Managing the interface between solar/wind farms and the main utility grid.
- Industrial Power Distribution: Providing telemetry for large-scale manufacturing plant substations.
- Smart Grid Infrastructure: Enabling remote monitoring and digitalized automation for modern energy networks.
Product Usage Instructions
- System Integration: This module must be inserted into a compatible ABB 500 series subrack. Ensure the rack power is disconnected before installation to protect the internal circuitry.
- Configuration: Use ABB’s proprietary engineering toolset (such as CAP500 or PCM600) to configure the module’s I/O mapping and communication parameters to match the substation’s logic.
- Signal Wiring: Ensure all signal cables are properly labeled and shielded. Low-voltage signal wires should be separated from high-power cables to prevent electromagnetic interference.
- Firmware Verification: Before commissioning, verify that the module firmware is compatible with the version of the central protection and control unit.
Common Questions & Answers (Q&A)
Q: Is the 500MTM02 1MRB150020R0712 hot-swappable? A: Generally, ABB 500 series modules should be replaced while the subrack is powered down to ensure no data corruption or electrical surges occur during the transition.
Q: What is the purpose of the LEDs on the front panel? A: The LEDs provide immediate visual diagnostics. A steady green LED usually indicates “Run” or “Healthy” status, while red or flashing LEDs indicate internal faults or communication errors.
Q: Can this module be used in harsh outdoor environments? A: No, the 500MTM02 is designed for indoor use within a climate-controlled protection cabinet. The ambient temperature should remain within the specified range to prevent component degradation.
Recommended Industrial Automation Models
- ABB 500MTM02 1MRB150020R0712
- ABB REB500 Busbar Protection Module
- ABB 1MRB150068R0001 500BCU01
- HONEYWELL CC-TCNT01 ControlNet Interface
- HONEYWELL 51304441-175 Low Level Mux
- HONEYWELL MC-TDOY22 Digital Output 24VDC
- BENTLY NEVADA 3500/20 125744-01 Rack Interface Module
- BENTLY NEVADA 3500/92 136180-01 Communication Gateway
- BENTLY NEVADA 330103-00-05-10-02-00 Proximity Probe
- TRICONEX 3604E Digital Output Module
- TRICONEX 3703E Isolated Analog Input
- TRICONEX 4352B Communication Module
- ALSTOM MICOM P546 Current Differential Relay
- ALSTOM 018501602 Circuit Breaker Control Board
- EMERSON VE4003S2B1 DeltaV I/O Subsystem Carrier
- EMERSON KJ3221X1-BA1 DeltaV PD Controller
- EMERSON A6110 Machine Monitoring Card
- ABB 3BSE018103R1 CI801 Profibus Interface
- HONEYWELL TC-ODK161 16-Channel Digital Output
- TRICONEX 3009 Main Processor Unit
★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
One year warranty, special discount after sale
The company focuses on DCS, PLC, robot, large servo four systems
The main products are all kinds of module/card, controller, touch screen, servo drive
The company's advantages: the supply of imported original products, professional production of accessories
Fast delivery time, complete supply, The seller has more than $1526000 worth of industrial control products inventory
We Can transport to the world!!!
——————————————————————————————————————
[service contact information]
Purchase and consultation hotline: +8613365909307 (Whatsapp/ Wechat)
E-mail: dcsplcsales@gmail.com
Contact Person: Simon
① 24-hour email reply (12 hours);
② For shipment to countries outside Asia, please contact the seller.
Main brands include: ABB, Bailey, GE, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, EMERSON EMERSON, B&R, MOTOROLA, FUANC, REXROTH, KUKA, HONEYWELL, NI, DEIF, Yokogawa, WOODWARD WOODWARD, Ryan, SCHNEIDER SCHNEIDER, Yaskawa, MOOG, EPRO, PROSOFT and other major brands
Related Products:


