ABB DSAI133A 3BSE018290R1 | Analog Input Termination Unit module

The ABB DSAI133A is a high-density analog input module designed for the Advant S800 I/O system. This module serves as a critical interface for processing continuous signals from field devices such as pressure transmitters, temperature sensors, and flow meters. Known for its precision and robust electrical isolation, the DSAI133A ensures that analog data is accurately converted into digital format for the controller, maintaining signal integrity even in electrically noisy industrial environments.

Product Specifications and Datasheet

• Product ID: 3BSE018290R1
• Model Designation: DSAI133A
• Input Channels: 16 Channels
• Input Range: 0 to 20 mA, 4 to 20 mA, 0 to 10 V, 2 to 10 V
• Resolution: 12 bits plus sign
• Isolation: Group-wise galvanic isolation
• Power Consumption: 100 mA (at 24V DC)
• Dimensions (Depth): 102 mm
• Dimensions (Height): 185 mm
• Dimensions (Width): 58 mm
• Weight: 0.35 kg
• Country of Origin: Sweden / Estonia

Application Areas

The DSAI133A module is widely implemented in automated process control systems within the power generation, water treatment, and pulp and paper industries. It is ideal for applications requiring the monitoring of multiple analog points in a compact footprint, specifically within S800 I/O stations connected to AC 800M or Advant Controller 400 series.

Product Operating Instructions

Before installation, verify that the module is compatible with the MTU (Module Termination Unit) being used, typically the TU810 or TU812. The DSAI133A is hot-swappable, allowing for replacement without powering down the entire station, provided the system is configured for high availability. Ensure that the input signal type (current or voltage) is correctly set within the engineering software (e.g., Control Builder M) to match the field device wiring. Shielded twisted-pair cables are highly recommended for all analog connections to minimize interference.

Common Questions & Answers

Q: Does the DSAI133A support HART protocol communication? A: No, the DSAI133A is a standard analog input module. For HART capabilities, you would typically look at modules in the DSAI 130D or AI845 series.

Q: Can I mix voltage and current inputs on the same module? A: Yes, the channels can be configured independently through the software, though they share common return paths within their respective groups.

Q: What happens if a channel experiences an over-range signal? A: The module includes diagnostic features that will flag an “Over-range” or “Short-circuit” error in the controller’s status registers, allowing for rapid troubleshooting.

Q: Is external power required for the field loops? A: The module provides signal conversion, but the power for 2-wire transmitters usually comes from the module’s associated termination unit or an external 24V DC supply depending on the wiring scheme.

Recommended Similar Models

• ABB DSAI130 3BSE013158R1
• ABB DSAI130A 3BSE013159R1
• ABB AI810 3BSE008516R1
• ABB AI830A 3BSE013210R1