Sale!

Bently Nevada 3300/20-12-01-01-00-01 | Dual Thrust Monitor Module

⚠️Product status:  Discontinued

🏚️Delivery time:  In stock

🆕Product status:   100% new

🌍Sales country: All over the world

🥇Product situation: one year warranty

📮Contact me:dcsplcsales@gmail.com

💬Wechat/Whatsapp :+86 13365909307

☀️Have a good day! Thanks for watching my website!

Category:
Get a quote, please contact me immediately:
Simon Zhang
dcsplcsales@gmail.com
Phone/Whatsapp/Skype/Wechat: +86 133 6590 9307

Description

Parameter Specification
Model Number 3300/20-12-01-01-00-01
Product Type Dual Thrust Monitor (3300 System)
Input Signals Two Proximitor Probes (Displacement)
Power Consumption 3.5 Watts (Maximum)
Signal Resolution 0.1 mm or 1 mil (User Configurable)
Recorder Outputs +4 to +20 mA (Standard)
Mounting Slot Single Slot in 3300 Series Rack
Dimensions 19.3 x 2.5 x 24.1 cm (Standard Rack Height)
Weight Approx. 0.82 kg (1.8 lbs)
Origin USA

The Bently Nevada 3300/20-12-01-01-00-01 is a dual-channel thrust position monitor specifically designed to protect rotating machinery by monitoring axial shaft movement. Thrust monitoring is a critical safety function, as excessive axial movement can lead to catastrophic internal contact between the rotor and the casing. This module provides continuous, real-time tracking of the rotor’s position relative to the thrust bearing, ensuring the operational health of turbines, compressors, and large motors integrated into a DCS PLC SYSTEM.

This specific configuration supports two independent channels of thrust monitoring, allowing for redundant or dual-path measurement. The 3300/20 series is renowned for its “OK” circuit, which continuously supervises the integrity of the transducers and field wiring. If a sensor failure or wire break is detected, the monitor provides an immediate alert, preventing false trips while ensuring the protection logic remains active. The module features clear front-panel displays for direct observation of thrust position and alarm status.

 

Operational Precautions

Proper transducer orientation is the most critical factor when commissioning the 3300/20-12-01-01-00-01. The proximity probes must be correctly gapped within their linear range—typically at the mid-point of the expected total travel—to ensure accurate tracking of both “active” and “counter-active” thrust directions. Failure to center the probe in its electrical linear range can result in signal clipping and a loss of protection at extreme shaft positions.

Electrical noise mitigation is equally important. All field wiring should consist of shielded twisted-pair cables, with the shield grounded only at the monitor rack to prevent ground loops. During system testing or “hot-swapping” (if the rack allows), ensure that any bypass or “Service” switches are activated to prevent the monitor from initiating an accidental machine trip. Always verify the relay logic configuration (Normally Energized vs. Normally De-energized) before connecting the module to the final safety shutdown circuit.

 

Common Questions & Answers (Q&A)

Q: Can this monitor be used for radial vibration instead of thrust? A: No. The 3300/20 is specifically programmed and calibrated for thrust (axial) displacement. For radial vibration, the 3300/15 or 3300/16 modules should be used.

Q: What is the “Dual” function in this model? A: It means the module can monitor two separate thrust points. This is often used for “voting” logic (e.g., 2-out-of-2) to increase the reliability of the machine protection system and reduce the risk of nuisance shutdowns.

Q: Does it support remote reset for alarms? A: Yes. The 3300 rack backplane allows for a remote reset signal, enabling operators to clear latched alarms from a control room once the thrust condition has returned to normal levels.

 

Recommended Similar Models

  1. 3300/16-12-01-02-00-00: Dual XY Vibration Monitor for radial shaft motion.
  2. 3500/40M-01-00: Proximitor Monitor for the newer 3500 series racks.
  3. 3300/15-02-01-01-00: Dual Radial Vibration Monitor with specific alarm delay settings.
  4. 3300/25-01-01-01-00: Dual Keyphasor Module for providing timing and speed references.
  5. 3300/10-01-01-01-00: Power Supply Module required to drive the 3300 monitor rack.

★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
One year warranty, special discount after sale
The company focuses on DCS, PLC, robot, large servo four systems
The main products are all kinds of module/card, controller, touch screen, servo drive
The company's advantages: the supply of imported original products, professional production of accessories
Fast delivery time, complete supply, The seller has more than $1526000 worth of industrial control products inventory
We Can transport to the world!!!
——————————————————————————————————————
[service contact information]
Purchase and consultation hotline: +8613365909307 (Whatsapp/ Wechat)
E-mail: dcsplcsales@gmail.com
Contact Person: Simon
① 24-hour email reply (12 hours);
② For shipment to countries outside Asia, please contact the seller.
Main brands include: ABB, Bailey, GE, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, EMERSON EMERSON, B&R, MOTOROLA, FUANC, REXROTH, KUKA, HONEYWELL, NI, DEIF, Yokogawa, WOODWARD WOODWARD, Ryan, SCHNEIDER SCHNEIDER, Yaskawa, MOOG, EPRO, PROSOFT and other major brands
Related Products:
DCS PLC sales DCS PLC sales DCS PLC sales DCS PLC sales