Description

 

Product Description

The GE IS200EDCFG1A / IS200EDCFG1ACB is an Exciter DC Feedback Board used in GE EX2100 excitation control systems. The EDCF provides feedback signal conditioning and measurement for the exciter field and generator-related DC signals, supplying the excitation controller with scaled feedback information for regulation and monitoring.

The board is designed to interface with the EX2100 control architecture through the associated backplane and control electronics. It is a legacy Mark VI/EX2100 circuit-board assembly intended for use in compatible excitation systems. The exact input configuration and system connections should be verified against the original board and cabinet drawings before replacement.

 

Product Datasheet

Specification	Details
Brand	General Electric (GE)
Model	IS200EDCFG1A
Assembly / PCB Number	IS200EDCFG1ACB
Series	EX2100 / Mark VI
Product Name	Exciter DC Feedback Board
Functional Acronym	EDCF
Product Type	DC Feedback / Signal Conditioning Board
Application	GE EX2100 Excitation Control
Primary Function	Exciter and Generator DC Feedback
Signal Processing	Feedback Measurement and Signal Conditioning
System Interface	EX2100 Control Backplane
Architecture	Simplex / Redundant Configurations, System-Dependent
Mounting	EX2100 Control Cabinet / Rack
Board Revision	G1A
PCB Revision	C
Condition	Verify actual item condition
Production Status	Legacy / Obsolete Component
Compatibility	Application- and system-dependent

 

Functional Features

⚙️ DC Feedback Measurement: Provides feedback circuitry for DC electrical measurements used by the EX2100 excitation control system.

⚙️ Signal Conditioning: Conditions measured feedback signals so they can be processed by the excitation control electronics.

⚙️ EX2100 Integration: Designed to operate as part of the GE EX2100 excitation-control architecture.

⚙️ Regulation Support: Feedback information can be used by the excitation regulator for monitoring and control functions.

⚙️ Board-Level Replacement: Suitable for maintenance of existing EX2100 systems where the original EDCF board requires replacement.

⚙️ Revision Identification: The complete IS200EDCFG1A / IS200EDCFG1ACB identification should be matched before installation.

 

FAQ

Q: What is the IS200EDCFG1A used for?
A: It is an Exciter DC Feedback Board used in GE EX2100 excitation control systems for DC feedback measurement and signal conditioning.

Q: What does EDCF stand for?
A: EDCF is the functional acronym for the Exciter DC Feedback Board.

Q: Is the IS200EDCFG1A a power board?
A: No. Its primary role is feedback measurement and signal conditioning within the excitation-control system.

Q: What is the relationship between IS200EDCFG1A and IS200EDCFG1ACB?
A: IS200EDCFG1A identifies the board model, while IS200EDCFG1ACB provides the more detailed assembly and revision identification found on the PCB.

Q: Can another EDCF revision replace this board?
A: Compatibility should be confirmed from the complete part number, revision, connector arrangement, system configuration, and existing EX2100 documentation.

Q: What should be checked before installation?
A: Verify the board identification, connector positions, wiring, rack location, system configuration, and any applicable calibration or commissioning requirements.

 

Troubleshooting & Safety

🛠️ Incorrect feedback: Check field wiring, connector seating, sensing circuits, and the associated excitation-control boards.

🛠️ Unstable excitation feedback: Inspect signal connections and compare measured feedback values with the approved system documentation.

🛠️ No feedback signal: Verify the applicable DC sensing circuit and backplane connection before replacing the EDCF.

🛠️ Replacement issue: Photograph and label all connections before removal and confirm that the replacement board has the same IS200EDCFG1A / IS200EDCFG1ACB identification.

⚠️ Excitation-system safety: EX2100 equipment can contain hazardous voltages and stored electrical energy. Apply approved lockout/tagout and discharge procedures before servicing.

⚠️ Field circuit safety: Do not work on energized generator or exciter field circuits unless the applicable site procedure specifically permits it and qualified personnel are performing the work.

⚠️ Protection and regulation: Incorrect feedback wiring can affect excitation regulation. Verify all connections before returning the system to service.

 

Recommended GE Models

1. IS200EXAMG1A — Exciter Attenuation Module
2. IS200EGDMH1A — Exciter Ground Detector Module
3. IS200EISBH1A — Exciter ISBus Board
4. IS200DSPXH1A — Digital Signal Processor Board
5. IS200ESELH1A — Exciter Selector Board
6. IS200ESELH2A — Exciter Selector Board
7. IS200ECTBG1A — Exciter Contact Terminal Board
8. IS200ECTBG2A — Exciter Contact Terminal Board
9. IS200EDEXG1A — Exciter De-Excitation Board
10. IS200EPBPG1A — Exciter Power Backplane Board
11. IS200EGPAG1A — Exciter Gate Pulse Amplifier Board
12. IS200EPSMG1A — EX2100 Exciter Power Supply Module
13. IS200EROCH1A — Exciter Regulator Board
14. IS200ERDDH1A — Exciter Regulator / Control Board
15. IS200EXHSG3A — Exciter High-Speed Relay Driver Board

★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★
One year warranty, special discount after sale
The company focuses on DCS, PLC, robot, large servo four systems
The main products are all kinds of module/card, controller, touch screen, servo drive
The company's advantages: the supply of imported original products, professional production of accessories
Fast delivery time, complete supply, The seller has more than $1526000 worth of industrial control products inventory
We Can transport to the world！！！
——————————————————————————————————————
[service contact information]
Purchase and consultation hotline: +8613365909307 (Whatsapp/ Wechat)
E-mail: dcsplcsales@gmail.com
Contact Person: Simon
① 24-hour email reply (12 hours);
② For shipment to countries outside Asia, please contact the seller.
Main brands include: ABB, Bailey, GE, FOXBORO, Invensys TRICONEX, Bentley BENTLY, A-B Rockwell, EMERSON EMERSON, B&R, MOTOROLA, FUANC, REXROTH, KUKA, HONEYWELL, NI, DEIF, Yokogawa, WOODWARD WOODWARD, Ryan, SCHNEIDER SCHNEIDER, Yaskawa, MOOG, EPRO, PROSOFT and other major brands
Related Products：