Description
5SHY3545L0020 3BHE014105R0001 5SXE08-0166 Servo Positioning Unit
5SHY3545L0020 3BHE014105R0001 5SXE08-0166 in the process of cutting off a very good control of the pressure, the amount of cut, according to different glass materials should be set to different pressures and the amount of cut, in addition to cut off the steps are also more important, generally used in the steps are: ① CF surface cut ② TFT surface cut ③ TFT surface cut ④ C F surface cut. In the scribing equipment are now used in the multi-knife (previously a single knife work), generally in the 5-7 knives, this system uses 5 knives, in this system the knife’s cut into the amount of left and right movements are controlled by servo systems, and are used in high-speed movement, which can greatly improve the efficiency of the work.
5SHY3545L0020 3BHE014105R0001 5SXE08-0166 adopts the Q06H CPU as the control unit, the IOP310 as the positioning unit of the servo system, and also adopts two IOP310 communication module units, one of which is connected with the human-machine interface (A970GOT), and the other is connected to the image processing system, which is mainly used for Mark point (also known as “Marking”). The image processing system is mainly used for the recognition of Mark points (also known as marker points) and then generates a deviation correction value. In addition, the PC1 connected to the QJ74C24 is a special machine for setting the mechanical parameters and working parameters of the system as well as programming the cut-off procedure.
The communication of 5SHY3545L0020 3BHE014105R0001 5SXE08-0166 uses a special communication programme software. This system works by using deviation correction. For a new variety, the first Mark point recognition, login, MARK point shape can be arbitrary, but the general use of the word ‘ten’ for the Mark point marking, as shown in Figure 4, is the image processing system on the Mark point recognition process, recognition after the generation of a deviation from the amount of correction, based on the amount of deviation from the calculation of the reference position.