ABB LDMTR-01 power distribution output

ABB LDMTR-01 power distribution output

ABB LDMTR-01 power distribution output

The input thermal resistor has a range of 10 Ω to 400 Ω, a minimum resolution of ± 2m Ω, stability of ± 3m Ω, and a temperature drift of ± 20PPM/℃. The three-wire input method compensates for lead error, with an additional error of ≤ ± 0.02 ℃ when the range is ≥ 50 ℃ (Pt100).
·
Thermocouple input voltage range 4~80mV, minimum resolution ± 1 μ V. Stability ± 2 μ V. Temperature drift<± 20PPM/℃. The additional error of cold end compensation is ≤ ± 1 ℃.
·
The maximum range of sliding wire resistance is 0-500 Ω. When the range is less than 50 Ω, it should be connected to a three wire input mode to offset the lead error. Accuracy ± 0.05% FS.
·
The maximum range of DC millivolts is 0-100mVDC, the minimum range is 0-5mVDC, and the accuracy is ± 0.05% FS. Minimum Resolution 1 μ V. Stability 2 μ V. Temperature drift ± 20PPM/℃.
·
Distribution voltage>16VDC. The clamping current of the power distribution output can be customized according to needs, and it needs to be explained when ordering. The factory default value is 28mA (± 2mA).
·
Distribution and current input/output, with a typical accuracy of ± 0.05% FS; Temperature drift ± 0.1 μ A/℃.
·The output signal is 4-20mA and can be expanded to 0-20mA.