ACQUISITIONLOGI AL81G

ACQUISITIONLOGI AL81G

ACQUISITIONLOGI AL81G

Input to the computer for processing. The method of installing the equivalent ring (counterweight) on the crankshaft crankshaft (tightening and loosening several screws) takes too much time. This system has developed a new structure of equivalent ring that can be used with only one screw. Before balancing, first install the equivalent ring on the crank of the crankshaft workpiece, and then install a well balanced toothed pulley at the crankshaft taper shank, and tighten it with a nut; Then install the crankshaft on the balancing frames 1 and 2 of the dynamic balancing machine, and place the crankshaft journal on the supporting roller pair 1 of the balancing frame 1 and the auxiliary roller of the balancing frame 2, respectively. Next, place the toothed belt on toothed pulley 2 (the other end of the toothed belt has already been placed on toothed pulley 1). So just press the automatic test button, and the cylinder will push the sliding plate downward along the vertical guide rail. The supporting roller pair on the sliding plate will press down on the crankshaft journal to make it close to the auxiliary roller. At the same time, the toothed belt will also be tightened. The AC servo motor will quickly reach the predetermined speed driven by the AC servo controller, and data sampling can be carried out once the speed stabilizes. To improve testing efficiency, two identical sets of toothed pulley 2 and equivalent ring are prepared. During the balancing test of the workpiece, the second toothed pulley 2 and equivalent ring can be installed on the next workpiece to be tested to save time.

MHD090B-035-NG0-UN
MHD090B-058-NP0-UN
MHD090B-035-NG1-UN
MHD090B-058-NP1-UN
MHD090B-058-PP0-UN
MHD090B-058-NG0-UN
MHD090B-058-PG0-UN
MHD090B-058-NG1-UN
MHD090B-035-NP1-UN
MHD090B-035-PG1-UN
MHD090B-035-PP0-UN
MHD090B-035-PP1-UN
MHD090B-047-PP1-UN
MHD090B-058-PG1-UN
MHD090B-047-NG1-UN
MHD090B-047-PP0-UN
MHD090B-047-PG1-UN