CTC SC203-100A-002IR-010-01K-05 Data Acquisition Systems

The CTC SC203-100A-002IR-010-01K-05 features seven input and output voltage levels and level shifting options, allowing the module to be adapted to almost any process control installation. Additional ranges are available upon request. 8B49 Signal filtering in the module is accomplished with a 4-pole filter optimized for time and frequency response, which results in normal mode rejection of greater than 80 dB for signal frequencies above the passband. one pole of the filter is located on the system side of the isolation barrier for anti-alias purposes, and the other three poles are located on the field side. 8B49 and 8B39-07 Modules The 8B49 and 8B39-07 modules’ output current and voltage are limited to protect customer equipment from system overloads and fault conditions. To ensure the protection of expensive data acquisition equipment, the signal outputs of the 8B49 and 8B39-07 modules are protected against accidental connection of voltages up to 40Vrms.

CTC SC203-100A-002IR-010-01K-05 models are available to meet unique signal conditioning needs, and the 8B series will soon be available in a single-channel DIN-mount configuration. Pending approval, design accessories for the 8B series include a range of backplanes (2, 4, 8, and 16 channels) that provide screw terminal inputs and outputs, as well as DB25 header connectors to connect the 8B outputs to the user’s data acquisition system. The DB25 headers can be mated with 1, 2, or 7 meter cables (supplied as an accessory) to connect transducers and sensors to an external 25-screw terminal interface board. True RMS input modules and two-wire transmitter interface modules will be available in the coming months. Customized signal conditioning models are available to meet unique signal conditioning needs, and the 8B Series will soon be available in a single-channel DIN-mount configuration.

CTC SC203-100A-002IR-010-01K-05 offers screw terminal inputs and outputs and DB25 header connectors to connect the 8B outputs to the user’s data acquisition system. the DB25 header can be mated with 1, 2, or 7 meter cables (supplied as an accessory) to connect transducers and transducers to an external 25-screw terminal interface plate. True RMS input modules and two-wire transmitter interface modules will be available in the coming months. Customized signal conditioning models are available to meet unique signal conditioning needs, and the 8B Series will soon be available in single-channel DIN-mount configurations. The 8B Series offers screw terminal inputs and outputs and DB25 header connectors for connecting the 8B outputs to the user’s data acquisition system.