DS200LDCCH1AGA Management Register

The DS200LDCCH1AGA Local Bus Coupling Unit’s management register, which records the order in which the data in the command table is used, records the use of the data words in the command table list in sequential order. Its two management bits then indicate the use of the data word. If a data in the bus data storage area is a “source” that is to be output to the local bus, or a “destination” that is to receive data from the local bus, neither a “source” nor a “destination” is a “source” or a “destination” that is to receive data from the local bus, or a “source” or a “destination” that is to receive data from the local bus, the data word in the instruction list is used in order. A unit that is neither a “source” nor a “destination” is a unit that does not need to be exchanged.

DS200LDCCH1AGA This management bit memory is accessed during data exchange. After judging the information provided by the management bit and the status of the data received on the local bus (data received after the control system recognises the information), the local bus data is stored in the bus data storage area of the data register.

DS200LDCCH1AGA The SIM insertion key on the panel of the 70PR02 module allows the insertion of an auxiliary device for the commissioning module of the analogue memory 70SS01. During programming, signals to be received from the local bus or signals to be sent from the data storage to the local bus can be simulated via the analogue interface SIM of the coupling unit.