FI830F 3BDH000032R1 Logic Position Counter

FI830F 3BDH000032R1

Technical Parameters:

  • User defined tag-based programming for descriptive I/O naming
  • Simple-to-use instructions and Easy math to eliminate complex ladder logic rungs
  • Application tools for quick access to setup, programming, debugging and PAC control
  • Task Manager for quick and easy prioritization of Ladder Logic code
Categories: ,
Get a quote, please contact me immediately:
Simon Zhang
Phone/Whatsapp/Skype/Wechat: +86 133 6590 9307


FI830F 3BDH000032R1 Logic Position Counter

The FI830F 3BDH000032R1 can be set for a wide range of parameters when required, including maximum acceleration, maximum speed, the amount of current in the motor coil during accelerated operation and position hold, micro-step interpolation resolution, parameters of the waveform generator and pulse generator, and more than 20 other parameters. 2, drive function (driver); 64 subdivision micro-step precision control. High power, matching up to 3A stepping motors.

FI830F 3BDH000032R1 Each axis has two 24-bit comparison registers for logical position counting or actual counter position size comparison, which can be used for software limits. Each axis has two stop limit protection switch interfaces and two proximity switch interfaces. The RS-232 serial bus control eliminates the need for driver installation. Default speed is 19200 bps, maximum speed is 115200 bps.

Each CAN message of the FI830F 3BDH000032R1 is time stamped with 100 µs accuracy. Up to 8000 messages per second can be processed. Supports standard frames with 11-bit identifier (CAN 2.0A) and extended frames with 29-bit identifier (CAN 2.0B active). Supports data frames and remote frames. Error frames can be detected. Excellent EMC performance. The analyser has a 110 cm (44 in.) long USB cable on one end and a 30 cm (12 in.) long CAN cable on the other. Use the DB 9-pin connector to access the CAN bus. Optional CAN bus driver with galvanic isolation is available. Designed for USB 2.0 and compatible with USB 1.1.