The ICS TRIPLEX 9832 is operated without buttons and displayed without indicators, and is operated and displayed using the TD400C text display. There are 3 operation and status screens, 1 parameter setting screen, 3 data correction screens (engineer’s screen), and 7 fault screens (automatically popped up according to the fault condition), etc. Its panel provides up and down arrow keys to flip the screen and switch the screen. In different operation screens F1, F2, F3, F5, F6, F7 keys to perform different operation control, and the corresponding state data display, the operation is very convenient and transparent.

The ICS TRIPLEX 9832 sends out pulse signals to control two servo drives separately, and can realise forward and reverse control. The equivalent relationship between the number of pulses and the actual position data can be calculated through the known mechanical transmission ratio, the number of pulses per revolution of the servo motor, the electronic gear ratio and other data. The rotary pulse encoder can detect the tilt position by counting with the high-speed counter HC0 function. The encoder is mounted on the end shaft of the tilt adjustment motor, and the actual amount of tilt in millimetres can be obtained after conversion.

ICS TRIPLEX 9832 In the roll system adjustment screen, the keys F1, F5 and F2, F6 control the manual lifting and lowering of the inlet and outlet roll systems respectively; F3, F7 control the adjustment of the tilting of the roll system; and F4, F8 command the position of the roll system into the zero point and the wear position of the belt respectively. fsel003 f202174.02 In the plate adjustment screen, the keys F1, F2, F3 and F5, F6 and F7 control the tilting of the roll system respectively. F6 and F7 control the lifting adjustment of the three deed blocks respectively, and detect the displacement through the analogue position sensor and display it after conversion.