LYT000A Fiber Optic Network Communication Module

LYT000A can be composed of a variety of fiber optic networks. Logical independent dual-bus electrical interface, can realize the backup of the electrical interface or a single device to access the dual-redundant system; using a point-to-point network can be achieved through the fiber-optic connection between the two CAN bus segments; using a dual optical port chain network of fiber-optic bus to achieve multiple segments of the CAN bus connection (200);

LYT000A using dual optical port to achieve dual-fiber ring network redundancy function, when a fiber optic failure, the system will rebuild the network link within 15ms to protect the system’s normal communications, to achieve self-healing signal transmission protection function, the system will automatically recover after the removal of network failures, no setup, no need for the root node, to quickly complete the network into a ring and unlock the loop! This series of products are plug and play, no need to configure, to a large extent, the user installation and commissioning process is simplified.

Features
l Supports logically independent dual CAN buses, including CAN2.0 A and CAN2.0B, with 32 predefined communication rates.
l DeviceNet and CANOoen buses support rate adaptation or manual setting of all their standard rates.
l 1~2 CAN electrical interfaces and 1~2 155M fiber optic interfaces for flexible selection, supporting redundant dual-network fiber optic ring topology.
l More than 60km fiber optic distance, 155Mb/s, high-speed optical interface to better support burst data transmission over long distances.
l 6 dual-color LED status indicators, fiber optic link and power failure relay output alarm.
l Electrical interface 4000V lightning protection, 1.5 A overcurrent, 600W surge protection. Industrial grade design, EMC testing and certification.
l DC9-36V wide redundant dual power supply, DC1500V power isolation, reverse connection protection.
l IP30 protection level, wave pattern aluminum reinforced chassis, using standard industrial 35mm rail mounting.