UR8FH Turbine Flow Meter


Technical Parameters

D2-04TD1 – 4 pt. 12-24 VDC current sinking output module, 1 common (4 common terminals),4.0A/point, 8.0A/module, fused per point (non-replaceable), removable terminal

Categories: ,
Get a quote, please contact me immediately:
Simon Zhang
Phone/Whatsapp/Skype/Wechat: +86 133 6590 9307


UR8FH Turbine Flow Meter

UR8FH communication protocol adopts standard MODBUS-RTU protocol, which can communicate with common DCS, HMI, PLC and other intelligent devices. Turbine flow meters are all explosion-proof products, explosion-proof grade: ExdIIBT6, IP30 protection grade, reinforced chassis, 35mm DIN rail mounting, industrial standard DC24V power supply, with power reverse polarity protection.

UR8FH performance indicators:
Current analog (0-20)mA
Support 1~4 channels of current analog
(4-20)mA current interface parameters.
Accuracy 0.5%.
Time delay <10ms
Maximum load capacity 600&Omega;
Input resistance 120&Omega;

UR8FH thermocouple transmitter and unit combination instrument and DCS, PLC and other systems supporting the use of input single or dual thermocouple, and after arithmetic, linearization, interference suppression and other processing, the transmitter output isolated single or dual linear current or voltage signals, and to improve the performance of the electrical isolation between the input, output, power supply. Adopting standard RS485 interface, only two signal lines are needed to establish a multi-point distributed network.