ABB PCD230A 3BHE022291R0101

ABB PCD230A 3BHE022291R0101 is a modular production training system. ABB PCD230A 3BHE022291R0101 integrates various technologies such as electrical control, PLC application, sensors, and pneumatics. It consists of seven workstations, including automatic feeding, transmission detection, vacuum sorting, color sorting, position adjustment, accessory supply, and assembly and unloading. The function of the automatic feeding station is to provide workpieces for other workstations. The workpiece is grabbed by a pneumatic robotic arm, and then moved through movements such as translation, lifting, and swinging, and placed on the conveyor belt before returning to its original position.
ABB PCD230A 3BHE022291R0101 is the starting unit of the entire automatic production line system, mainly composed of workpiece loading pipes and ejection devices, brackets, valve groups, terminal block components, PLC, buttons, cable trays, and bottom plates. The main function is to automatically push the workpiece placed in the silo onto the material tray, so that the mechanical arm of the conveying unit can grasp and transport it. There are two operating modes: manual and automatic. Before operation, ensure that there is material in the feeding tray.

ABB PCD230A 3BHE022291R0101 is a rotating material tray with two tubular silos installed on it. A diffuse reflection photoelectric switch is installed at the corresponding feeding position of the material tray mouth, which is used to detect whether there is material storage in the material tray mouth. When the workpiece reaches the material tray opening, the photoelectric switch detects the presence of a workpiece and provides a signal to the system that the material tray in this unit has a workpiece. ABB PCD230A 3BHE022291R0101 can be used in the control program of the conveying unit to drive the robotic arm device to grab this workpiece and deliver it to the conveyor belt. The workpiece in the silo automatically moves downwards under the action of gravity, preparing for the next gripping of the workpiece. If there are no workpieces in the current tray mouth, the tray will rotate to the tray mouth under program control to continue detection. Until there are no workpieces at both material tray openings, the material tray stops rotating.